Ghws3605f0 Parts

This hex washer-head screw is used in dishwashers to secure panels, brackets, and other hardware. Replacing a missing or corroded fastener restores a tight, stable installation and helps stop looseness or vibration during cycles.

• Fastens dishwasher panels, brackets, trim, or mounts to the cabinet/frame
• Replaces lost or stripped hardware after service or installation
• Helps address loose or rattling panels and minor misalignment
• Stainless steel construction per OEM spec for moisture-prone environments

• Disconnect power and water supply before servicing the dishwasher
• Wear gloves; sheet metal edges can be sharp
• Start threads by hand to avoid cross-threading; tighten with an appropriate driver
• Do not overtighten, especially when threading into plastic

Washer won't turn on or buttons unresponsive? This user interface control board assembly powers your washer's control functions. Moderate DIY repair.

Secures hose connections to prevent leaks in your dishwasher. Replace if water pools under the unit or connections feel loose. Confirm fit with your model.

Fix a washer that won't spin or agitate properly with this stator assembly. Direct motor component replacement requires moderate skill and basic tools.

Size: 8 - 18 ab.

This stainless steel machine screw secures appliance components and trim for a reliable, corrosion-resistant hold. Use it when replacing lost or damaged fasteners to restore proper fit and reduce noise or misalignment. What it does:

• Fastens panels, brackets, and small assemblies where a #8-28 threaded screw is required
• Provides a rust-resistant connection for wet or humid appliance areas
• Helps stop rattling, loose trim, or misaligned parts caused by missing or stripped screws

• Disconnect power to the appliance before servicing
• Use the correct screwdriver or driver bit to avoid stripping the head
• Thread carefully by hand to avoid cross-threading; tighten until snug—do not overtighten
• Keep removed screws organized to ensure correct reassembly

If your washer dispenser leaks or has poor water flow, this dispenser body assembly channels water properly and restores dispensing control.

Replacement shipping bolt plug for front-load washers. Covers bolt holes after removing transit bolts. Needed when original plugs are lost or damaged.

Shipping bracket stabilizes washer internal components during transport and delivery. Removes after installation. Replace if damaged, broken, or missing.

Size: 8-18 b.

The Wire Tie is an OEM part for GE dryers. It is used to secure and organize internal wiring, ensuring that wires remain properly positioned and do not interfere with the operation of the dryer. This part plays an important role in preventing wires from becoming tangled, pinched, or damaged during the dryer’s cycles.

Over time, the wire tie can become worn out, broken, or damaged due to prolonged exposure to heat, vibrations, or wear from normal use. A compromised wire tie can lead to loose or unsecured wiring, which may impact the performance of the dryer or cause electrical issues.

Symptoms of a bad Dryer Wire Tie include:

• Loose or unsecured internal wiring
• Interference with dryer components during operation
• Electrical malfunctions or short circuits
• Wires appearing frayed or damaged due to improper support

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This molded wire tie standoff provides a secure anchor point for a cable tie to hold wiring and harnesses away from moving parts and hot or sharp surfaces, helping reduce wear and electrical risk. Fits common HVAC and appliance wiring panels. What it does:

• Anchors wire ties to the appliance cabinet or chassis so harnesses stay routed and secured
• Prevents wires from rubbing on sharp edges, hot components or moving parts
• Helps stop intermittent electrical issues from loose or vibrating connections
• Reduces noise from loose wiring that can vibrate during operation

• One wire tie standoff

• Disconnect power before servicing the appliance to avoid shock or damage
• Mount in the original standoff hole or approved panel location; secure a cable tie through the top loop to hold the harness
• Use the correct fastener or snap method for your model—do not force or overtighten
• If routing or attaching multiple wires, verify clearance from heating elements and moving parts

This mount damper is the refrigerator air-damper support that helps direct and regulate cold air between compartments for more even temperatures. Fits replacement needs for dampers that are cracked, loose, or not seating correctly. What it does:

• Holds and supports the air damper assembly so the damper can open and close properly
• Guides cold air from the freezer into the fresh-food compartment to help maintain set temperatures
• Can cause uneven cooling, warm fresh-food section, or poor airflow when damaged or broken
• May reduce rattling or vibration if the original mount is worn or loose

• One mount damper (single replacement piece)

• Disconnect power to the appliance before beginning any repair
• Remove shelves, crispers, or trim panels as needed to access the damper area
• Handle plastic components carefully to avoid cracking during removal or install

5/16-24 hex washer head screw for washers. Secures internal panels and mounting brackets. Order a replacement if the original is stripped, missing, or damaged during disassembly.

Polymer-coated 4-foot drain hose for washers. Connects washer to standpipe or laundry sink. Replace if cracked, kinked, or leaking during drain cycle.