Glda696mss Parts

This rack stemware insert secures glasses and stemware in the dishwasher rack to help prevent tipping and chipping during cycles. Durable plastic holds stems upright for safer cleaning. What it does:

• Clips into the dishwasher rack to support wine glasses and stemware
• Helps keep tall or fragile glasses from tipping, banging or breaking while washing
• Maintains spacing between stems to improve water flow and cleaning
• Fits into existing rack wire tines to convert a standard rack into a stemware-safe area

• One rack stemware insert

• Remove the dishwasher rack to align and clip the insert onto the rack wires; ensure it snaps securely before returning the rack
• No electrical disconnection required, but remove dishes and check for sharp rack edges during installation
• Do not use if the part is cracked or broken; replace to avoid glass damage
• Hand-wash the insert if needed and place back in rack before running dishwasher

This left-side hinge assembly secures and supports a refrigerator door so it opens and closes smoothly. Replacing a worn or damaged hinge restores proper door alignment and helps the seal close fully. What it does:

• Supports the refrigerator door and keeps it aligned on the cabinet
• Provides the pivot point that allows the door to open and close smoothly
• Helps prevent door sag, rubbing, or binding when the hinge is worn or damaged
• Reduces stress on the door seal to maintain proper cabinet temperature

• One left-side hinge assembly and its mounting screws

• Disconnect power and remove food from door shelves before starting; support the door to prevent drop or damage
• Use appropriate hand tools; keep fasteners tight but avoid over-torquing
• Check door alignment and gasket contact after installation; adjust as needed per your service manual

A dishwasher sump assembly that houses the pump and routes wash water; replaces a damaged or leaking sump to restore proper draining and circulation. Designed to fit as the factory-style replacement for the original sump. What it does

• Channels and collects wash water for the dishwasher pump to circulate and drain.
• Replaces cracked or warped sump housings that can cause leaks under the appliance.
• Can stop intermittent draining problems or pump cavitation caused by a damaged housing.
• Helps reduce vibration and noise when the pump and housing are functioning correctly.

• One sump assembly.

• Disconnect power and water to the appliance before beginning any repair.
• Inspect surrounding seals, gaskets and fasteners during install; replace any damaged items.
• Tighten mounting hardware to OEM torque and ensure proper alignment to prevent leaks.
• Test or replace those components separately as needed.

This replacement pressure switch hose routes air/suction from the wash tub to the pressure/water-level switch so the machine can detect fill level and run correctly. It restores reliable pressure signal transfer when the original hose is cracked, split, or blocked. What it does:

• Transfers air pressure from the tub to the pressure/water-level switch so the control senses water level
• Helps prevent overfilling or incorrect fill-level detection caused by leaks or clogs in the hose
• Can resolve symptoms like inconsistent fills, washer not completing cycles, or erratic water-level sensing
• Replaces brittle, collapsed, or hardened tubing that no longer seals

• Disconnect power and water before starting any repair; follow all safety guidance for your appliance
• Inspect hose routing and orientation, then slip new hose onto the same fittings with a secure, snug fit
• Replace any damaged clamps or connectors and avoid kinked or pinched hose routing

This fill hose delivers water from the washer inlet valve to the tub, restoring proper water flow and preventing leaks. Replace a cracked, split, or leaking hose to stop water damage and restore normal fill operation. What it does:

• Carries incoming water from the inlet valve to the washer tub during fill cycles
• Stops leaks and water spraying when the original hose is cracked, swollen, or split
• Helps restore normal water fill levels and cycle performance when the hose is failing
• Fits where a direct OEM replacement hose is required for proper seal and routing

• One fill hose

• Turn off water supply and unplug the appliance before starting work
• Inspect inlet valve fittings and hose ends; replace clamps or fittings if worn
• Hand-tighten fittings, then snug with tools—do not overtighten to avoid damage
• Check for leaks after restoring water and power; recheck fittings after a test cycle

This small rubber cushion provides a soft stopping surface to reduce noise, vibration and wear where moving parts contact the cabinet or tub. It helps keep components aligned and running quietly for longer. What it does

• Acts as a bumper between moving parts and the cabinet to reduce rattling and impact noise
• Dampens vibration to prevent premature wear on adjacent parts
• Helps maintain proper spacing and alignment for doors, panels or internal assemblies
• Commonly used where a soft, durable contact point is required

• One cushion as shown

• Disconnect power to the appliance before inspecting or replacing the cushion
• Typically installs by pressing into a slot or onto a mounting post; check exact position before removal
• Replace any worn or torn cushions to restore quiet operation and prevent damage

This wire tie secures and organizes wiring inside the appliance to help prevent chafing and loose connections. Its 7-7/8 inch length is suited for bundling harnesses and routing cables away from heat and moving parts. What it does:

• Fastens and groups wires or small hoses to keep them neatly routed
• Helps prevent wire chafing, abrasion, and contact with sharp edges
• Reduces the chance of intermittent connections from loose wiring
• Keeps wiring away from moving components to reduce noise and wear

• Disconnect power before servicing the appliance
• Position wiring as needed, insert tie and tighten; avoid over-tightening
• Trim excess tie length flush and secure cut end away from wires
• Replace any damaged wiring insulation and verify routing before restoring power

This replacement screw secures panels and components on compatible GE appliances, restoring proper fastening to prevent loose parts and rattling. It's a simple hardware fix that helps maintain safe, quiet operation. What it does:

• Fastens and secures panels, brackets, or internal components
• Replaces missing or stripped screws to stop rattling and reduce vibration
• Helps maintain alignment of removable covers and service panels
• Used wherever the OEM specifies this exact screw for a secure fit

• Disconnect power and water before servicing the appliance
• Use the correct size screwdriver or driver bit to avoid stripping the head
• Tighten snugly but do not overtighten; overtightening can strip threads or damage parts
• Keep removed hardware organized before final reassembly