Gmr06aapabb Parts

A single M4 tapping screw used to secure panels and components on compatible appliances. This screw provides a reliable fastener for plastic and thin metal parts, helping restore proper fit and reduce vibration or rattling. What it does:

• Secures trim, control panels, brackets, and covers where a self-tapping fastener is required
• Replaces stripped or missing screws that cause loose panels or parts
• Restores proper alignment and reduces noise from vibrating components
• Designed to form threads in softer materials for a tight hold

• Use the correct M4 driver bit and steady pressure to start the screw straight
• Do not over-tighten; stop when the part is snug to avoid stripping or cracking
• Replace only with the same size and type of screw for proper fit and function
• Disconnect power before servicing appliances to reduce shock risk

This grommet-cap handle is a small replaceable trim piece that caps and cushions the end of a range/oven door handle for a finished look and secure fit. It helps keep the handle seated and reduces movement or rattling. What it does:

• Caps the exposed end of a door or handle for a clean, finished appearance
• Cushions and secures the handle to prevent looseness or wobble
• Helps keep handle trim aligned and reduces vibration noise
• Restores a worn or cracked end piece that can detract from the appliance's appearance

• Disconnect power to the appliance or follow manufacturer safety guidance before servicing
• Typically installs by pressing into the handle end; handle removal may be required on some models
• Inspect surrounding trim and fasteners; replace any damaged clips or screws
• Do not force the part; if it does not seat easily, check orientation and mounting surfaces

This door grommet is a small rubber push-in cushion that protects and cushions the appliance door where it contacts the cabinet. It helps prevent metal-on-metal wear and reduces rattling for a quieter, smoother door operation. What it does:

• Cushions door contact points to prevent scratching and wear
• Dampens vibration and reduces door rattle or noise
• Helps maintain proper door alignment at the contact area
• Simple, passive part—no wiring or electronics

• One door grommet

• High-level DIY: remove the old grommet and press the new grommet into the existing hole or slot until fully seated
• Unplug or disconnect power to the appliance before performing any service that requires moving the door
• Avoid using sharp tools that can damage the grommet or surrounding trim; trim edges may be needed for tight fits
• If grommet mounts behind a gasket or trim, remove that trim first following the appliance manufacturer's instructions

The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.

You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.

Symptoms of a bad R134 drier include:

• Reduced cooling efficiency
• Frost buildup on the evaporator coils
• Unusual noises from the refrigeration system
• Increased energy consumption
• Refrigerator not maintaining the set temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This power cord assembly supplies electrical power from the wall outlet to your refrigerator. Replace a cut, frayed, or overheated cord to restore safe, reliable operation and eliminate intermittent power loss caused by a damaged cord. What it does:

• Provides the electrical connection between the household outlet and the refrigerator's wiring
• Helps resolve no-power or intermittent power when the cord is moved
• Addresses visible damage such as cuts, cracks, fraying, or a melted/discolored plug
• Mitigates arcing, sparking, or a burning odor originating from the cord or plug area

• One power cord assembly

• Disconnect power by unplugging the unit or switching off the circuit breaker before servicing
• Pull the refrigerator forward for access; note the original cord routing and connections
• Install the new cord along the same path and secure any built-in strain relief; ensure the ground connection is properly seated
• Restore power and verify operation

Guardette (right) is a replacement right-side protective guard used on select GE refrigerators. It restores the interior guard/trim that protects components and helps keep the cabinet interior aligned for smooth door and shelf operation. What it does:

• Replaces a cracked, broken or missing right-side guard to restore proper coverage and protection
• Shields interior wiring and components from contact and everyday wear
• Helps prevent items from catching on damaged trim and reduces rattles or misalignment
• Matches OEM fit and mounting points for a straightforward replacement on compatible units

• Disconnect power to the appliance before starting any repairs
• Removal may require gently prying or unsnapping the old guard; use a trim tool to avoid damage
• Align mounting tabs and press firmly until the replacement snaps into place
• If fasteners are present, tighten by hand to avoid cracking plastic

A lower wire shelf designed to restore stable storage and airflow in the fridge compartment. Replaces a damaged or missing lower shelf so food and containers sit level and the interior cools evenly. What it does:

• Provides a stable surface for storing food, pans and containers in the lower refrigerator area
• Wire construction promotes air circulation to help maintain consistent temperatures
• Replaces bent, broken or missing lower shelving that causes items to slide or lean
• Helps prevent spills and improves usable storage organization

• 1 lower wire shelf

• Remove food and loose items before installation; support shelves while removing and installing
• Install into existing side clips or track; no special tools required for most models
• Inspect mounting clips or track for damage and replace if worn to ensure secure fit
• Disconnect power only if working near electrical components or lighting; follow safety precautions

This thermostat case is the replacement housing that secures the temperature control/thermostat assembly and sensor in the correct position, helping maintain accurate temperature regulation inside the appliance. Durable plastic construction matches OEM fit. What it does

• Holds and protects the thermostat/temperature sensor assembly in the control area
• Keeps the thermostat properly positioned so it can sense and regulate temperature
• Prevents wiring and sensor damage from vibration or contact with other components
• Can help resolve symptoms like loose or unseated thermostat, erratic temperature control, or difficulty mounting the thermostat

• Disconnect power to the appliance before starting any repair.
• Access may require removing the control panel or inner liner; keep track of screws and fasteners.
• Handle the thermostat and sensor gently to avoid damage; do not bend or stress sensing elements.
• Replace only with the exact part number to ensure proper fit and function.