Gpt220ssloss Parts

This upper dishrack assembly restores smooth glide and secure storage on the top level of the dishwasher. Replace a rusted or broken rack to keep cups and bowls organized and properly spaced for consistent wash coverage.

• Provides the upper-level storage area for glasses, cups, and small dishes
• Slides on the rail tracks; failures can cause binding, dropping, or the rack coming off the track
• Replaces racks with rusted coating, broken tines, or damaged side components/adjusters
• Helps maintain proper spray clearance by keeping items stable and evenly spaced

• Disconnect power to the dishwasher before servicing
• Open the door, remove the upper-rail end caps/stops, and slide out the old rack
• Transfer any reusable rack accessories or clips from the original rack if needed
• Slide the new rack onto the rails, reinstall end caps, and confirm smooth travel

The Water Valve is an OEM replacement part for GE dishwashers. Located inside the valve body, this electronically-controlled component precisely regulates water inlet and flow during each cycle of the wash sequence. The water valve utilizes sensors and timer modules to open and close water lines at the correct times based on cycle selections.

Symptoms of a defective water valve include:

• Failure to fill or improper filling  
• Inability to switch between cycles
• Water leaks from the valve body area
• Erratic or inconsistent water usage amounts

Causes of malfunction often stem from worn internal seals, mineral buildup obstructing valve ports over time, or issues with the electronic control board. Replace yours today with this genuine GE water valve for reliable water control, sensor functions, and trouble-free dishwasher cycles. 

This GE replacement part is compatible with Hotpoint, RCA, and Kenmore models.

This plastic coarse filter traps large food particles and debris in the dishwasher's sump so dishes rinse more effectively and drain paths stay clearer. It's a simple replacement that helps maintain normal wash performance. What it does:

• Captures large food scraps and debris before they reach the pump and drain
• Helps prevent clogging that can cause poor wash results or standing water
• Works with the dishwasher's fine filter and pump assembly to maintain cleaning efficiency
• Reduces the chance of food redeposit on dishes when functioning correctly

• One plastic coarse filter

• Disconnect power to the appliance before servicing to avoid electrical shock
• Remove lower dish rack to access the filter area; lift out the old coarse filter and seat the new filter in the sump until it snaps into place
• Inspect and clean the surrounding filter area and fine filter when replacing to ensure a proper seal and performance
• Do not force parts; if the filter does not seat easily, check orientation and debris that may prevent proper installation

This lower rack assembly replaces a worn or damaged dishwasher lower rack to restore secure dish support and smooth rack movement. Designed as a complete lower rack for holding plates, bowls and cookware during wash cycles. What it does:

• Supports dishes and cookware on the dishwasher bottom during cycles
• Restores proper rack alignment and rolling action
• Helps prevent dishes from tipping or colliding during washing
• Reduces noise caused by bent tines or broken rollers

• One complete lower rack assembly

• Slide old lower rack out and replace with new assembly; verify rollers engage the track
• Inspect and replace any damaged roller wheels or track clips for smooth operation
• No special tools typically required; keep hands clear of sharp tines
• Turn off power to the dishwasher at the breaker if working near electrical components or removing panels

The Unicouple Assembly with Faucet Adapter is an OEM part specifically designed for GE dishwashers. The connection linking the water supply lines to the dishwasher, allows water from the faucet to reach key water systems inside the appliance.

Causes of a bad Unicouple Assembly can include wear and tear in o-rings and seals over time, mineral buildup restricting water flow, or damage from impact to delicate connection points.  

Symptoms of a bad Unicouple Assembly include:

• Slow or uneven water fill during cycles   
• Leaking or spraying water under the sink or within the dishwasher
• Water supply issues indicated by error codes 
• Drainage problems related to water system function

Replace yours today with this genuine OEM GE part to ensure smooth water performance. This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This sump assembly collects and directs wash water to the pump so your dishwasher can drain and circulate properly. Replacing a damaged sump restores proper water flow and helps stop leaks or drainage failures. What it does:

• Houses and channels wash water from the tub to the drain/pump assembly
• Seals the tub bottom to prevent leaks caused by cracks or worn seals
• Enables the pump to maintain proper circulation and pressure for cleaning
• Resolve symptoms like water leaking under the dishwasher, failure to drain, or unusual pump noise

• Disconnect power to the appliance and shut off the water supply before beginning
• Installation typically requires removing the lower access panel and possibly the tub/shield; handle parts gently to avoid damaging seals
• Inspect and replace any gaskets or clamps as needed to ensure a watertight seal
• Test the dishwasher through a short cycle and check for leaks after installation

The Lower Spray Arm Base is an OEM replacement part for GE dishwashers. It serves as the mounting point inside the lower basket for the lower spray arm assembly to attach. Proper positioning of the spray arm base allows for uniform water coverage on the dishes below. 

Causes of a faulty spray arm base include cracks, deterioration, or breaks in the plastic mounting features from repeated cycle use.  

Symptoms of an improper or defective spray arm base are:

• Loose or unstable lower spray arm assembly
• Uneven cleaning results on lower basket dishes
• Leaks around the lower spray arm area
• Chipped or degraded plastic appearance

This GE replacement part is compatible with Hotpoint, RCA, and Kenmore models.

This sump port plug seals the washer's sump/drain opening to stop leaks and keep internal components protected. It restores a watertight closure at the sump port so the appliance can operate without water escaping. What it does:

• Seals the sump or drain port to prevent water leaks from the washer tub area
• Helps maintain proper water containment during fill and wash cycles
• Keeps debris and contaminants out of the sump cavity
• Useful when replacing a damaged, cracked, or missing sump port cap

• One sump port plug

• Designed to press/seat into the sump port; verify seating for a snug, leak-free fit
• Inspect mating surface for debris or damage before installing to ensure a proper seal
• Disconnect power and water supply before accessing internal components

A small squeeze-style clamp used to secure thin appliance tubing and help prevent leaks by holding water or drain lines in place. Simple, compact design for tight spaces where a low-profile clamp is needed. What it does:

• Pinches and holds small-diameter tubing to keep lines secure and reduce slipping
• Helps stop drips or leaks caused by loose or improperly seated tubing
• Works in tight spaces where larger clamps won't fit
• Commonly used on water, drain, and ice-maker lines in refrigerators and other appliances

• Disconnect power and shut off water supply before servicing the appliance
• Slide clamp over tubing and pinch/compress per OEM guidance until tubing is held firmly
• Inspect connections after restoring power/water and run appliance to check for leaks
• Replace with identical clamp size if tubing or fittings are damaged