Grl2289stka Parts

Left-side door handle trim for refrigerators. Restores finished appearance and edge protection. Replaces cracked, scratched, or missing trim pieces.

This is a defrost heater assembly with a protective sheath that mounts along the evaporator coils inside the refrigerator's freezer section. It generates heat during the defrost cycle to melt frost buildup on the evaporator, ensuring proper airflow and cooling. Replace this part if you notice excessive frost in the freezer, the refrigerator not cooling properly, or water pooling beneath the unit.

This pipe holder is a small plastic clip that secures tubing and small pipes inside the appliance, helping keep lines organized and preventing rubbing or disconnection. It restores proper routing and reduces vibration-related noises. What it does:

• Holds and secures water, drain, or refrigerant tubing to prevent sagging and chafing
• Keeps lines routed away from moving parts to reduce wear and noise
• Helps maintain proper tube alignment to avoid strain on fittings
• Commonly replaced when the original clip is cracked, broken, or missing

• Disconnect power and water before working on the appliance
• Inspect surrounding tubing and fittings for damage when replacing the clip
• Typically installs as a push-fit or snap-on clip; use gentle pressure and avoid forcing
• Replace broken or brittle clips to prevent tubing damage or leaks

Restores tension to lever mechanisms in refrigerators. Replace when lever sticks, slips, or fails to return properly. Verify fit with your model number.

This holder is a small mounting bracket used to secure internal components in place, helping keep parts aligned and stable for reliable operation. It provides a direct, OEM-compatible replacement to restore proper fit and function. What it does

• Secures and supports nearby components to prevent shifting or vibration.
• Restores proper alignment where a worn or broken holder causes rattling or loose parts.
• Helps maintain normal operation by keeping assemblies seated correctly.
• Works behind panels or inside assemblies where a dedicated bracket is required.

• One holder/mounting bracket as shown.

• Installation generally requires removing the panel or access cover where the holder is located.
• Use proper fasteners shown in your appliance; replace any damaged screws or clips as needed.
• Disconnect power before servicing electrical appliances to reduce shock risk.

This condenser assembly connects and secures the refrigerator condenser components, helping the cooling system run reliably. It replaces damaged or corroded condenser wiring to restore proper condenser function and airflow. What it does:

• Provides the OEM-configured wiring and mounting for the condenser to ensure consistent electrical connection.
• Restores proper condenser operation when original wires are cut, burnt, corroded, or loose.
• Helps prevent intermittent cooling or compressor issues caused by faulty condenser connections.
• Maintains correct routing and strain relief for condenser lines to reduce wear and chafing.

• One condenser assembly with attached wiring and mounting hardware as shown.

• Recommended for technicians or confident DIYers; disconnect power before starting and unplug the appliance.
• Inspect surrounding components for damage; replace any compromised parts.
• Use proper tools and tighten mounting hardware to OEM torque where specified; avoid pinching wires.

This is a vegetable tray assembly that slides into the crisper section of the refrigerator to hold fresh produce. It typically sits on drawer rails or slides beneath a glass shelf in the lower portion of the fresh food compartment. Replace this tray if it is cracked, warped, or the sides have broken, preventing it from sliding properly or holding items securely.

This connector rail secures and routes electrical connections in the appliance, keeping wiring organized and supporting reliable connections for proper operation. It helps prevent loose harnesses and reduces strain on wiring during use. What it does:

• Provides a stable mounting point for wire harness connectors and plugs
• Maintains correct alignment and spacing of electrical connections
• Reduces stress on wiring to help prevent intermittent connections
• Commonly used when loose or damaged connector mounts cause power or control issues

• Disconnect power and unplug the appliance before starting any work
• Handle connectors and wiring gently to avoid damaging pins or insulation
• Reinstall in the original orientation and secure mounting fasteners snugly

Decorative door trim handle for refrigerator doors. Replaces scratched, cracked, or worn trim pieces to restore a finished look and easier grip.

This DC fan motor assembly powers the cooling fan that moves air through the appliance and across the coils, helping maintain steady temperatures and efficient performance. Replacing a failing motor restores proper airflow and reduces noise and long run times.

• Spins the fan to circulate air across coils and through air passages for consistent cooling
• Supports stable compartment temperatures and overall cooling efficiency
• Common failure signs: fan won't run or is intermittent, weak/no airflow, or loud rattling/buzzing/grinding near the fan area
• Can contribute to warmer-than-normal temperatures and extended compressor run time

• Disconnect power before servicing; wear cut-resistant gloves
• Access location varies by model; note wire orientation and mounting order during removal
• Transfer any reusable brackets, grommets, or the fan blade from the original assembly if required by your model
• Ensure the fan spins freely and no wiring contacts the blade; restore power and test operation

Fix uneven cooling or warm spots in your refrigerator with a new evaporator fan blade. This part circulates cold air throughout the unit for consistent temps.

Fix no ice production or water dispenser not working. This inlet valve controls water flow to your ice maker and dispenser. Moderate DIY repair.

Restores clean-tasting water and steady flow by filtering sediment and contaminants. Replace every 6 months or when flow weakens. Verify fit with your model.

Complete refrigerator door assembly including inner liner and outer panel. Replaces cracked, damaged, or worn doors that compromise temperature seal.

Ice won't dispense or jams in the chute? This refrigerator ice dispenser assembly restores smooth ice delivery and fixes broken dispenser mechanisms.