Grmf3202rm-1 Parts

The Door Switch is an OEM part for Frigidaire refrigerators. It is a basic on/off switch located inside the refrigerator door frame that controls power to interior lights. 

When the door is opened, the magnet inside activates the switch, illuminating LED lights inside the refrigerator and freezer compartments for convenience. This allows for ease of accessing and identifying items without additional switches.

Causes of a bad door switch can include normal wear over time, moisture exposure, or impact damage.

Symptoms of a bad door switch include:

• Lights not turning on when the door is opened
• Lights remaining on continuously even when the door closed  
• Inability to shut off lights manually 

Replacing the switch with a Frigidaire OEM part ensures the refrigerator's interior lights function properly based on the door position. It also helps optimize energy usage. This replacement is compatible with models by Electrolux, Gibson, Kelvinator, and Kenmore.

Replacement door magnet that helps the refrigerator or freezer door stay closed for a tighter seal and more consistent cooling. Restores magnetic hold so doors close reliably and reduce warm spots. What it does

• Provides magnetic hold for the door liner so the door stays shut during normal use
• Helps maintain the gasket engagement to preserve internal temperature
• Common symptom: door not staying closed, food warming, or frost build-up near the door
• Used in door/gasket assembly where magnets secure the seal

• Turn off power to the appliance or unplug before removing door trim or accessing internal components
• Remove door liner or gasket per service instructions to access and replace the magnet; keep fasteners and seals intact
• Press or seat magnet into its channel or mounting location; use the OEM fastener or adhesive method specified by the manufacturer

This fan motor-and-blade assembly restores airflow in compatible Frigidaire refrigerators and freezers to help maintain even temperatures and reduce warm spots. It replaces a failed fan to improve circulation and appliance performance. What it does:

• Circulates air inside the fresh food and freezer compartments for more even cooling.
• Moves air across cooling components to help prevent localized frost and warm zones.
• Replaces noisy, stalled, or non-spinning fans that cause reduced cooling or unusual sounds.
• Supports proper airflow so the appliance can maintain set temperatures more consistently.

• Disconnect power before starting—unplug the appliance or shut off the circuit breaker.
• Access typically requires removing interior panels or the rear evaporator cover; retain fasteners.
• Handle blades carefully to avoid bending; ensure electrical connectors are fully seated.

The Evaporator Fan Motor is an OEM part for Frigidaire refrigerators. It functions to circulate cold air throughout the refrigerator compartment by drawing air across the evaporator coil. Consistent air circulation helps maintain even temperatures.

Symptoms of a bad evaporator fan motor include inconsistent temperatures inside the refrigerator. Sections may be warmer or colder than expected. Icing or frost patterns could indicate improper air flow as well.  

Causes of a bad evaporator fan motor include:

• Fluctuating temperatures within the refrigerator
• Increased frost or ice buildup  
•  Food not staying chilled as expected  
• Abnormal noises coming from the fan area

This Frigidaire replacement is compatible with some Electrolux, Amana, and Kenmore models too. 

The Handle Screw is an OEM part for Frigidaire refrigerators. It is a fastener or screw used to securely attach the refrigerator door handle. Properly installed handles allow for easy opening and closing of refrigerator doors with minimal effort. 

Causes of a bad Handle Screw include damage or wear over time and corrosion that causes the screw to seize or strip. 

Symptoms of a bad Handle Screw are:

• Loose or wobbly door handles
• Difficulty opening the refrigerator door  
• Handles detaching from the door
• Doors that will not stay closed securely

This OEM Frigidaire replacement is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
 

This mullion assembly replaces the vertical center trim between refrigerator doors to restore a finished appearance and help maintain a proper door seal. It's the correct replacement when the center trim is cracked, warped, or missing. What it does:

• Replaces damaged or broken center mullion trim to restore door fit and appearance
• Helps close the gap between doors to support proper gasket sealing and reduce cold-air leakage
• Stops rattling or door misalignment caused by a worn or broken mullion
• Restores the finished look of the door center where the mullion mounts

• Disconnect power to the appliance before starting any repair and remove food from door area as needed
• Remove any screws, clips, or door trim pieces holding the old mullion and carefully detach it before installing the new assembly
• Align new mullion, secure fasteners snugly (avoid overtightening), and confirm doors close and seal correctly

This outer door assembly replaces a damaged or worn exterior oven door panel to restore appearance and provide a proper seal. It ships as a finished stainless exterior door ready for reuse with existing inner components. What it does

• Replaces a dented, scratched, or corroded outer door to restore the oven's exterior finish
• Helps maintain a proper outer barrier for heat containment when used with existing inner door parts
• Addresses cosmetic issues and visible wear on the appliance front
• Compatible with factory door mounting points and trim when original inner parts and hardware remain installed

• High-level replacement only: outer door swaps typically require removing the door from the appliance and separating outer and inner panels—follow the model-specific service manual.
• Handle and trim may need transfer from the old door; confirm what ships before installation.
• Wear appropriate PPE (gloves, safety glasses) and avoid scratching the finished surface during handling.
• Disconnect power at the breaker and allow the appliance to cool before starting work.

This replacement crisper drawer restores usable storage space in the refrigerator and keeps fruits and vegetables contained and protected from spills. It provides a direct-fit replacement to return proper drawer function and organization. What it does:

• Holds produce and small food items so they stay organized and visible
• Replaces a cracked, warped or damaged drawer that no longer slides or seals properly
• Helps prevent items from falling onto lower shelves and reduces spill cleanup
• Restores proper alignment with the refrigerator's drawer tracks and supports

• Remove food and empty the old drawer before starting
• Slide the old drawer straight out on its tracks and lift to release, if applicable
• Align the replacement drawer with the tracks and slide in until it seats properly
• Handle carefully to avoid chipping or cracking; do not force if it binds

This is the icemaker housing assembly that supports and protects the icemaker's internal components, helping maintain proper water routing and structural alignment for reliable ice production. Fits select top- and side-mount refrigerator icemakers. What it does:

• Provides the structural shell that holds the icemaker module and related components in place
• Directs water toward the fill tube and ice mold to help form ice properly
• Shields internal components from debris and helps prevent water leaks around the icemaker area
• Resolves symptoms such as loose or misaligned icemaker, leaking near the icemaker, or inconsistent ice formation

• Icemaker housing assembly (1)

• Disconnect power and water supply before starting any repairs
• Handle plastic housing carefully to avoid cracking tabs or mounting points
• Reuse or replace mounting screws and seals as needed; verify proper alignment before restoring power

This bin assembly is a replacement refrigerator drawer that restores usable storage space and helps keep produce and smaller items organized. It fits into the refrigerator compartment and provides a removable, easy-to-clean storage surface. What it does:

• Replaces a cracked, broken or missing refrigerator drawer so items stay contained
• Restores proper product support and helps prevent items from sliding or falling
• Provides a smooth sliding/removable drawer for easy access to stored food
• Visible, rigid bin construction designed for everyday fridge use

• One bin assembly

• Install by sliding the bin into the existing cabinet rails until it seats; your model's manual for exact placement
• No special tools typically required; remove all food and shelves as needed for access
• Handle carefully to avoid cracking the plastic; wear gloves if necessary to prevent cuts from edges
• If the original mounting rails or supports are damaged, replacement of those parts may be required for secure installation

This factory replacement screw secures panels, brackets, or trim on your appliance so parts stay tight and aligned. Swap in a new screw when one is missing or stripped to restore a solid, rattle-free fit.

• Fastens compatible panels, brackets, handles, or internal hardware
• Helps maintain proper alignment and stability
• Common fix for loose or wobbly handles/trim, rattling noises, or missing hardware
• Replace if threads are stripped, head is damaged, or corrosion is present

• Disconnect power before servicing; wear cut-resistant gloves
• Use the correct screwdriver or nut driver to avoid stripping
• Start threads by hand to prevent cross-threading
• Tighten until snug; do not overtighten

This #8-32 x 3/8 screw secures appliance panels, brackets, and assemblies. Replace a missing or stripped fastener to keep parts tight and aligned, reduce vibration, and restore proper fit in compatible refrigerators and freezers.

• Machine-thread fastener sized #8-32, 3/8-inch length
• Secures control housings, trims, covers, and support brackets per model design
• Replaces missing, worn, or corroded screws that cause loose or rattling parts
• Helps maintain alignment and stability after service

• Unplug the appliance; shut off water if applicable
• Match thread size to the original and start by hand to avoid cross-threading
• Use the correct driver; do not overtighten, especially into plastic
• Verify component alignment and operation after fastening

• Thread size: #8-32
• Length: 3/8 inch

This left-hand door closer replaces the refrigerator/freezer door closer that helps the door swing closed smoothly and stay aligned for a proper seal. Restores reliable closing and reduces door sag or misalignment. What it does:

• Guides and supports the left-side door as it closes to prevent slamming and ensure proper latch engagement
• Helps maintain an even seal to preserve internal temperature and reduce energy loss
• Reduces door sag, rubbing, or uneven gaps caused by worn or broken closers
• Works with the existing hinge/door hardware to control door motion

• High-level replacement — remove the door trim/inner panel to access the closer if required
• Keep screws and brackets organized; verify orientation for left-hand side before fastening
• Disconnect power to the appliance or follow manufacturer's safety guidance when working near electrical components

This refrigerator door handle replaces a cracked, broken, or worn handle to restore a secure grip and clean appearance. It installs on the exterior of the fridge door so you can open and close the door safely and easily. What it does:

• Provides a sturdy grip for opening and closing the refrigerator door
• Replaces handles that are cracked, chipped, loose, or damaged
• Restores door appearance and helps prevent accidental slips
• Works with the existing door mounting points and hardware on compatible models

• Basic hand tools typically required; mounting screws may be reused from the original handle
• Support the door while removing/installing the handle to avoid stress on hinges or trim
• Do not overtighten screws; snug is sufficient to avoid cracking the handle

This name plate is the exterior ID label that restores the appliance's factory identification and appearance. It replaces a faded, torn, or missing label so the unit is easier to identify and looks finished. What it does:

• Provides the factory identification label used for appliance identification and service reference
• Restores the appliance's exterior appearance where the original label was damaged or missing
• Helps owners model/serial information displayed on the appliance surface
• Fits the location originally occupied by the manufacturer's label (surface-mount style)

• One replacement name plate

• Install using the original fasteners or adhesive; do not force or bend the plate
• Clean and dry the mounting area before installation for proper adhesion or fit
• Disconnect power to the appliance before working in areas that expose electrical components
• If original mounting hardware is missing or damaged, use like-for-like replacements rated for appliance use