Gse25gypfs Parts

The Harness Cab Lower is an OEM replacement part for GE refrigerators. It sits behind the fresh food doors and contains wiring harnesses that power critical interior features.

Causes of a bad harness cab can include damaged insulation exposing wire fraying, breaks or crimps in wiring preventing power delivery, or short-circuits due to moisture over time. 

Symptoms include: 

• Lights, dispensers, or other interior components ceasing to operate properly
• Error codes or failure indications on control panels
• Buzzing or humming noises from wiring when functions are used

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This fixed freezer module shelf supports and secures the freezer module assembly, restoring stable storage and preventing items from shifting or contacting the module. It's a direct replacement for a cracked, warped, or missing shelf. What it does:

• Holds and supports the freezer module assembly so it stays properly positioned.
• Keeps stored items from contacting or damaging the module.
• Replaces shelves that are cracked, broken, or bent and that allow items to slide or fall.
• Reduces rattling or movement caused by a loose or broken shelf.

• Disconnect power to the refrigerator before servicing to prevent electrical hazard.
• Empty the freezer area and remove loose shelves or bins that block access.
• Align the shelf with its mounting points and seat it gently; do not force or modify the part.
• If fasteners are present, reuse OEM fasteners or replace with manufacturer-specified hardware.

This foam insulation tube slips over refrigerator tubing to help reduce condensation and protect lines from moisture and minor abrasion. It's a simple replacement that restores padding and prevents dripping in affected areas. What it does:

• Insulates exposed tubing to reduce surface condensation and water buildup
• Cushions lines to help prevent chafing and minor damage
• Helps maintain a dry cabinet area by limiting drips from sweating lines
• Useful when original insulation is torn, compressed, or missing

• Disconnect power to the appliance before servicing; follow all safety guidelines
• Slide the foam sleeve over the tubing; trim to fit with a sharp blade if necessary
• Replace any damaged or brittle tubing discovered during install
• Do not use if foam is melted, charred, or contaminated

A replacement cover hinge that protects and secures the door hinge assembly so the door opens and closes smoothly while keeping hinge hardware hidden. Fits select refrigerators and restores proper hinge alignment and appearance. What it does

• Covers and protects the door hinge area from dirt and damage.
• Helps maintain correct hinge alignment for consistent door movement.
• Prevents direct contact with hinge hardware for safer use.
• Commonly replaced when cracked, broken, or missing and causing loose or misaligned doors.

• Installation requires basic hand tools; remove power to the appliance for safety before starting.
• Support the door while removing or installing hinge components to avoid damage or injury.
• Inspect adjoining hinge hardware and mounting surfaces; replace any worn parts as needed.
• Follow the appliance manufacturer's instructions for proper torque and reassembly.

This auger motor service kit replaces the drive components that move ice from the bin through the refrigerator door dispenser, helping restore reliable ice delivery. Use it when the dispenser won't turn or only hums. What it does:

• Powers and turns the auger to push ice through the dispenser — for symptoms like no ice dispensed or auger not turning.
• Replaces worn or failed motor/drive components that can cause the motor to hum without rotating.
• Helps eliminate intermittent dispensing, slow or weak auger movement, and auger-related jams.
• Restores engagement between the motor and auger so ice feeds consistently from the bin to the door.

• Disconnect power to the refrigerator before starting any repair.
• Remove ice bin/door panels per manufacturer instructions and keep fasteners organized.
• Follow OEM service instructions for correct motor alignment and secure mounting; test the dispenser after reassembly.

A direct-replacement evaporator defrost heater that melts frost and ice buildup on the freezer evaporator so the cooling system runs efficiently. Replaces a failed heater to restore normal automatic defrost operation. What it does:

• Heats the evaporator coil during the defrost cycle to remove frost and ice buildup.
• Helps prevent thick ice accumulation that can reduce airflow and cooling performance.
• Frequently replaced when frost repeatedly builds on the evaporator or the freezer runs colder than normal.
• Works with the refrigerator's existing defrost control and thermostat to restore automatic defrosting.

• One defrost heater (single assembly only)

• Disconnect power to the appliance before servicing to avoid shock.
• Remove freezer panels and handle the evaporator coil carefully to avoid damage.
• Verify defrost thermostat, control, and wiring are functioning before installing a new heater.

A direct-replacement crusher solenoid that actuates the ice-crushing mechanism in the dispenser/ice bucket, restoring normal crusher movement so the dispenser can break and deliver crushed ice without jams. What it does:

• Actuates the crusher assembly to move the crusher blades or gate during ice dispensing.
• Restores crushing action when the ice dispenser fails to produce crushed ice.
• Can help stop symptoms such as ice not crushing, dispenser jams, or a crusher mechanism that won't move.
• Engages electrically with the dispenser control when crush mode is selected.

• Disconnect power to the appliance before starting any repair to avoid shock or injury.
• Access may require removing the dispenser inner door, ice bucket, or panel.
• Handle plastic components and electrical connectors carefully; do not force connectors or wiring.
• After installation, restore power and test the dispenser through multiple cycles to ensure proper crusher operation.

The Mobility Wheel S Kit is an OEM part for GE refrigerators. This kit includes the necessary components to replace or install the wheels on the bottom of your refrigerator cabinet, allowing for easy movement and repositioning of the appliance.

A bad mobility wheel assembly can be caused by normal wear and tear over time, damage due to heavy loads or rough handling, or malfunctioning wheel mechanisms. If you find it difficult to move or reposition your refrigerator, or if the existing wheels are damaged, it may be time to replace the mobility wheel assembly.

Symptoms of a bad wheel assembly include:

• Difficulty in moving or sliding the refrigerator
• Uneven or unstable positioning of the appliance
• Excessive noise or scraping sounds when moving the refrigerator
• Damaged or worn-out wheels

Replace your faulty mobility wheel assembly with this genuine OEM part to restore your refrigerator. 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This cover hinge is the replacement hinge bracket that secures and supports the appliance door or access cover, restoring proper alignment and smooth opening/closing for safe, reliable operation. What it does:

• Replaces a worn, bent, or broken hinge bracket that can cause the door or cover to sag
• Restores correct door alignment and reduces rubbing or binding during opening and closing
• Helps maintain a proper seal by keeping the door positioned correctly
• Prevents further wear to the door and surrounding trim by stabilizing movement

• One cover hinge bracket

• Disconnect power to the appliance before beginning any repair
• Handle door/support panels carefully to avoid dropping; have a helper if the door is heavy
• Use the factory mounting screws and torque lightly; do not overtighten to avoid stripping
• If mounting hardware is missing or damaged, replace hardware with OEM-specified fasteners

This shield trough assembly catches and channels defrost and condensation water away from the refrigerator cabinet to help prevent leaks and ice buildup. It's a direct-fit replacement that restores proper water drainage and containment. What it does

• Collects defrost and condensation runoff and directs it to the drain pan
• Helps prevent water pooling inside the cabinet and under the appliance
• Reduces ice or frost accumulation caused by redirected water
• Provides structural support for adjacent trim and evaporator covers where applicable

• Disconnect power to the appliance before beginning any repair.
• Remove relevant shelves, drawers, and trim panels to access the trough; keep fasteners organized.
• Handle gently to avoid bending or damaging mounting tabs and seal surfaces.

This module shelf supports and secures the freezer control module or related electronics, keeping components stable and properly positioned for reliable operation. Fits into the freezer compartment to help prevent vibration and contact damage. What it does:

• Provides a stable mounting surface for the freezer control module or electronics assembly
• Keeps wiring and small components organized and away from cold airflow
• Reduces vibration and movement that can cause intermittent electrical issues
• Helps prevent physical damage from loose parts inside the freezer compartment

• One module shelf

• Disconnect power to the appliance before servicing to avoid shock or injury
• Inspect and reuse existing mounting hardware if not explicitly supplied

This molded duct assembly directs cold air from the freezer compartment into the fresh-food section to help maintain proper airflow and temperature balance. It replaces a damaged or cracked transition duct to restore directed air circulation. What it does:

• Channels freezer-cooled air into the refrigerator compartment for even cooling distribution
• Helps reduce warm spots in the fresh-food area when functioning correctly
• Can prevent excessive frost or ice buildup caused by misdirected airflow
• Supports proper operation of the freezer-to-fridge venting system

• Disconnect power to the appliance before service to avoid electrical shock
• Remove shelves, drawers, and access panels as needed to reach the duct
• Handle the duct carefully to avoid cracking plastic tabs; use appropriate fasteners when reinstalling

This badge is the small decorative nameplate used on the appliance exterior to display the manufacturer's emblem. It restores factory appearance and covers the original mounting location for a clean, finished look. What it does

• Replaces a damaged, faded, or missing exterior emblem to restore the appliance's original look
• Snaps or adheres into the existing badge location for a factory-correct appearance
• Helps identify the appliance visually without affecting function
• Common symptom: missing, scratched, or peeled badge on the appliance front

• One replacement badge/nameplate (exact fit for the listed part number)

• Installation is typically simple: align badge with mounting location and press into place; adhesive backing or snap clips may be used depending on model
• Clean mounting surface before installing to ensure good adhesion
• Use gentle pressure; avoid sharp tools that could scratch the finish
• If clips break during removal, replace clips only if explicitly listed as included

This 10-32 x 1/2 machine screw secures appliance components where a standard 10-32 fastener is required. It restores proper mounting and reduces vibration or loose panels for reliable, quiet operation. What it does:

• Secures panels, brackets, or components that use a 10-32 threaded hole
• Prevents rattling, misalignment, and intermittent contact caused by loose fasteners
• Maintains electrical or mechanical connections when used as the OEM-specified screw
• Helps restore fit and finish after repair or disassembly

• Use the correct 10-32 driver (Phillips or slotted depending on head) and hand-start the screw to avoid cross-threading
• Tighten until snug; avoid over-tightening to prevent stripping threads or cracking plastic parts
• Replace only with the same size and thread spec to ensure proper fit
• Disconnect power if working near energized components or wiring

This RFID cover and FCC label assembly protects the appliance's RFID module and provides the required regulatory marking. It helps keep the module secure and the label visible for compliance and service identification. What it does:

• Covers and protects the RFID module or antenna from dirt and physical contact
• Keeps the FCC/regulatory label attached and visible for compliance verification
• Helps prevent accidental damage that can affect communication or service diagnostics
• Suited for replacing a cracked, missing, or detached cover or label

• One RFID cover with attached FCC label

• Disconnect power to the appliance before servicing to avoid shock or damage
• Handle with care; this plastic cover and label are small and can be damaged by excessive force
• Reinstall using the original clips or fasteners; do not force into place
• If the RFID module or nearby electronics are exposed, avoid static discharge—use a grounding strap if available

This orifice and fan motor assembly replaces the heater or combustion air fan and its mounted orifice to restore proper airflow and ignition performance in gas appliance units. It helps stabilize burner operation and supports reliable heating cycles. What it does:

• Moves combustion/vent air to maintain proper burner airflow and consistent flame behavior
• Positions and secures the gas orifice to ensure correct fuel delivery to the burner
• Helps reduce frequent ignition failure, weak flames, or uneven heating when failing
• Works as a direct-fit replacement when the original orifice and small blower motor are worn or damaged

• Turn off gas supply and power to the appliance before attempting service
• Replace only with the exact part number shown; follow the appliance manufacturer's disassembly steps
• Check gas connections and seals after installation for leaks; use a gas leak detector or soapy water test