Gse25gypfs Parts

This rubber grommet secures the appliance's base grille, helping keep the grille fitted and reducing vibration and rattle. It's a simple replacement part to restore a snug, finished look at the appliance base. What it does:

• Cushions and retains the base grille in place to prevent gaps and movement
• Helps reduce vibration noise and rattling from a loose grille
• Restores proper fit where a grommet is cracked, torn, or missing

• One (1) grommet for the base grille

• Disconnect power to the appliance before beginning any service
• Typically installs by pressing into the grille or cabinet opening—no special tools required
• Inspect surrounding grille tabs or mounting points and replace any damaged hardware as needed

This cover fits over the refrigerator auger motor to protect internal components and help guide ice through the dispenser. It keeps the motor area enclosed to reduce debris intrusion and supports smooth auger movement. What it does

• Protects the auger motor and gearbox from ice, frost, and debris
• Helps guide ice from the bin into the auger for consistent dispensing
• Common symptom: reduced or intermittent ice dispensing, unusual noises from the dispenser area

• One cover

• High-level replacement — remove power to the refrigerator before starting
• Handle components gently to avoid damaging the auger or wiring
• If the auger still doesn't turn after replacement, check the motor, wiring, and control components

This XWFE filter cover secures the refrigerator's XWFE water filter in its housing to help maintain a proper seal and alignment for reliable water flow and filter performance. It replaces a damaged or missing housing cover. What it does:

• Covers and locks the XWFE water filter into the filter housing to keep the filter seated correctly
• Helps maintain the water seal to reduce leaks and prevent bypass
• Supports proper water flow through the filter for cleaner-tasting water
• Addresses symptoms like a loose/missing cover, filter not staying in place, or intermittent leaks near the filter area

• One XWFE filter cover

• Replace with power/water supply off; follow your refrigerator manufacturer's instructions before working on water system
• Typically installs by snapping or sliding into the filter housing—confirm alignment before pressing fully
• Inspect the filter O-ring and housing for damage and replace if necessary to ensure a proper seal

This is a replacement screw used to secure appliance components and panels so parts stay properly attached for safe operation. It's a direct-fit fastener matching OEM form and function. What it does

• Secures panels, trim, or internal components to prevent rattling or gaps
• Restores factory attachment where a screw is missing or stripped
• Helps maintain proper alignment of housing and service access
• Suitable when repair requires original-fit fasteners

• Disconnect power or unplug the appliance before servicing to avoid shock
• Use the matching screwdriver or bit to avoid stripping the head
• Thread carefully and avoid overtightening to prevent damage to threads or plastic parts
• Keep removed screws organized; replace only the screws that match the original locations

This sound damper cushions the refrigerator compressor to reduce vibration and minimize noise for quieter operation. It helps protect the compressor from metal-on-metal contact and dampens normal operating sounds. What it does:

• Cushions compressor mounting to absorb vibration and reduce noise
• Prevents metal-on-metal contact that can cause rattling or buzzing
• Helps stabilize the compressor to reduce wear from vibration
• Commonly used when compressor noise, rattling, or increased vibration is noticed

• One sound damper

• Always disconnect power to the appliance before beginning any repair
• Access the compressor area (rear lower cabinet); remove any panels as needed
• Remove the old damper and press the replacement onto the compressor mounting foot until fully seated
• If mounting hardware is damaged or the compressor mount appears worn, replace mounting parts.

This water filter manifold and tubing assembly fits refrigerators that use the XWF-style filter. It holds and seals the filter cartridge and routes water to the dispenser and icemaker for correct flow and leak-free operation. What it does:

• Mounts and seals the XWF filter cartridge
• Routes water through the filter to the dispenser and ice maker
• Replaces a cracked, clogged, or leaking filter head/manifold
• Typical symptoms: leaks at the filter connection, weak/no water dispensing, reduced ice production, filter won't seat or stay in

• One manifold/head with attached inlet and outlet tubing

• Unplug the refrigerator and shut off the water supply
• Dispense water to relieve pressure; place a towel or pan to catch residual water
• Release quick-connect fittings; note tube routing and transfer any mounting hardware from the old assembly
• Restore water and power, check all connections for leaks, and flush several cups of water to purge air

This recess grille fits the refrigerator's water/ice dispenser well. It supports your cup and helps catch drips, restoring a clean, finished look in Dorian Gray when the original insert is cracked, stained, or missing.

• Sits in the dispenser recess to provide a stable surface for cups during dispensing
• Helps collect minor drips and splashes to keep the area tidy
• Direct replacement when the original grille is broken, warped, discolored, or missing
• Common symptoms include rocking cups, pooled water on the shelf, or a worn appearance

• Typically tool-free: lift out the old grille from the dispenser recess
• Clean and dry the recess before installing the new insert
• Set the new grille in place and ensure it sits flat and properly aligned

The Drier is an OEM component specifically designed for GE combination refrigerator-freezers. Absorbing moisture, its treated silica particles buffer humidity within refrigerant lines. Proper drying sustains energy-efficient performance while preventing corrosion.

Causes of a faulty drier commonly relate to saturation reducing capacity. As desiccant degrades, water passes into closed system compressors requiring change. 

Symptoms of a bad drier involve:

• Frost and ice buildup impairing cooling  
• Puddling around evaporator evidencing leaks
• Higher operating costs from impaired efficiency

Causes of a bad drier involve typical saturation shortening drying cycles. Cracks release desiccant particles risking blockages necessitating timely replacement.

This OEM GE part is also compatible with some Hotpoint, RCA, and Frigidaire combination units. Replace to retain steady humidity management protecting components and maximizing freshness years of operation.
 

This condenser fan and housing assembly circulates air across the condenser coils to help your refrigerator dissipate heat and run efficiently. Replaces a damaged or worn housing and fan to restore proper airflow and cooling performance. What it does

• Moves air over condenser coils so the compressor can shed heat and maintain cooling
• Prevents overheating and helps the system run more efficiently
• Can stop loud fan noise, rattling, or reduced cooling when the fan or housing is damaged
• Restores correct airflow when the original housing is cracked, bent, or obstructed

• One condenser fan and housing assembly

• Disconnect power to the appliance before starting any repair
• Access may require removing rear or bottom access panels; keep track of fasteners
• Handle sheet metal edges and fan blades carefully to avoid cuts and damage
• After installation, verify fan spins freely and recheck connections; confirm proper cooling

This door foam assembly provides the insulating foam that fills the space between a refrigerator door's inner and outer panels to help maintain proper temperature and reduce panel vibration. It fits behind the door skin on compatible stainless steel doors. What it does:

• Replaces the insulating foam inside the door to help improve thermal performance and reduce cold-spot symptoms
• Dampens panel vibration and rattling that can occur from damaged or degraded foam
• Helps limit moisture buildup and condensation between door panels
• Restores the door's original fit to reduce air leaks around the door cavity

• One door foam assembly (stainless steel)

• Disconnect power before starting and remove food from the door area if required
• Removal of the door inner panel or outer door skin may be required; retain any clips/screws for reassembly
• Handle foam and door panels gently to avoid tearing the skin or distortion of the foam

This LED light cover protects and diffuses the refrigerator's interior LED lighting, improving light distribution while shielding the lamp from spills and impact. It restores a finished appearance and prevents direct glare from exposed LEDs. What it does:

• Diffuses and softens interior LED light for even illumination.
• Protects the LED module from splashes, dust, and accidental contact.
• Helps prevent direct glare from exposed bulbs for clearer visibility.
• Replaces cracked, yellowed, or missing covers that affect light quality.

• One LED light cover.

• Disconnect power to the appliance before removing or installing parts to avoid shock.
• Typically snaps into place or secures with a small screw; handle gently to avoid cracking.
• Inspect mounting tabs and nearby lamp housing for damage; replace any broken hardware before reinstalling.
• Use gloves or a clean cloth to avoid fingerprints or scratches on the diffuser.

This freezer door light switch restores interior lighting control so the freezer light turns on and off when the door opens and closes. It's a direct-replace switch that helps make it easier to see frozen items and check temperatures. What it does

• Actuates the freezer interior light when the door opens and closes
• Replaces a worn or stuck door switch that leaves the light always on or off
• Prevents unnecessary light-related power draw and helps avoid frost/moisture near the lamp area
• Fits in the door jamb where the original door plunger or actuator contacts the switch

• One replacement freezer door light switch

• Disconnect power to the appliance before starting any repair
• Access may require removing interior trim or the freezer door liner—keep fasteners organized
• Verify actuator/plunger alignment and smooth door operation before reassembly

This evaporator fan plenum is the molded housing that channels cold air from the evaporator across the refrigerator compartments, helping maintain even cooling and efficient airflow. It replaces a cracked, damaged, or warped plenum. What it does

• Directs airflow from the evaporator fan to the fresh-food and freezer sections for consistent temperature distribution
• Helps prevent air leaks around the evaporator area that can reduce cooling performance
• Often replaced when the original housing is cracked, broken mounting tabs are present, or airflow is obstructed
• Works with the evaporator fan and ducting to reduce frost buildup caused by disrupted airflow

• One evaporator fan plenum housing

• Disconnect power to the appliance before starting any repair
• Removal typically requires accessing the evaporator compartment and detaching mounting screws and any electrical connectors or duct clips
• Handle carefully; edges may be sharp and mounting tabs can be brittle on older units
• Verify alignment of the plenum with the evaporator fan and sealing surfaces to avoid air leaks after installation