Gss23gmpes Parts

This freezer shelf module restores a stable, level storage surface inside the freezer so you can organize and access frozen foods. Replace it if the shelf is cracked, warped, missing, or no longer seats securely in its supports.

• Provides a sturdy, level surface for storing frozen items
• Helps organize contents and maintain proper spacing for airflow
• Replaces a damaged, bowed, or missing shelf
• Symptoms include cracked/broken components, broken tabs, sagging, or a shelf that won't sit flat or lock in place

• Clear the area and remove the old shelf; retain any trim or hardware your model may use
• Align the new shelf with the correct mounting points and seat it fully and evenly
• If your shelf has a glass insert, handle with care; wear cut-resistant gloves
• Do not overload the shelf; refer to your owner's manual for placement and weight guidance

The Drier is an OEM component specifically designed for GE combination refrigerator-freezers. Absorbing moisture, its treated silica particles buffer humidity within refrigerant lines. Proper drying sustains energy-efficient performance while preventing corrosion.

Causes of a faulty drier commonly relate to saturation reducing capacity. As desiccant degrades, water passes into closed system compressors requiring change. 

Symptoms of a bad drier involve:

• Frost and ice buildup impairing cooling  
• Puddling around evaporator evidencing leaks
• Higher operating costs from impaired efficiency

Causes of a bad drier involve typical saturation shortening drying cycles. Cracks release desiccant particles risking blockages necessitating timely replacement.

This OEM GE part is also compatible with some Hotpoint, RCA, and Frigidaire combination units. Replace to retain steady humidity management protecting components and maximizing freshness years of operation.
 

Replacement dispenser housing shield that protects internal dispenser components and restores a clean, finished appearance. Fits the dispenser area and helps prevent damage from spills or impacts while improving dispenser alignment and usability. What it does:

• Shields internal dispenser parts from spills, debris and everyday wear.
• Restores proper fit and finish to the dispenser opening for consistent cup placement.
• Common replacement when the dispenser guard is cracked, broken, warped or missing.
• Helps reduce risk of leaks and keeps controls and mechanisms covered.

• Disconnect power to the appliance before starting any repair.
• Typically requires removal of the dispenser front or trim; basic hand tools recommended.
• Retain or transfer any clips, screws or brackets during replacement.

This LED light cover protects and diffuses the refrigerator's interior LED lighting, improving light distribution while shielding the lamp from spills and impact. It restores a finished appearance and prevents direct glare from exposed LEDs. What it does:

• Diffuses and softens interior LED light for even illumination.
• Protects the LED module from splashes, dust, and accidental contact.
• Helps prevent direct glare from exposed bulbs for clearer visibility.
• Replaces cracked, yellowed, or missing covers that affect light quality.

• One LED light cover.

• Disconnect power to the appliance before removing or installing parts to avoid shock.
• Typically snaps into place or secures with a small screw; handle gently to avoid cracking.
• Inspect mounting tabs and nearby lamp housing for damage; replace any broken hardware before reinstalling.
• Use gloves or a clean cloth to avoid fingerprints or scratches on the diffuser.

This freezer door light switch restores interior lighting control so the freezer light turns on and off when the door opens and closes. It's a direct-replace switch that helps make it easier to see frozen items and check temperatures. What it does

• Actuates the freezer interior light when the door opens and closes
• Replaces a worn or stuck door switch that leaves the light always on or off
• Prevents unnecessary light-related power draw and helps avoid frost/moisture near the lamp area
• Fits in the door jamb where the original door plunger or actuator contacts the switch

• One replacement freezer door light switch

• Disconnect power to the appliance before starting any repair
• Access may require removing interior trim or the freezer door liner—keep fasteners organized
• Verify actuator/plunger alignment and smooth door operation before reassembly

This inlet cover assembly directs airflow into the refrigerator fresh-food compartment to help maintain even cooling and protect internal components. Replaces a cracked or broken inlet cover to restore proper airflow and fit. What it does:

• Guides cold air from the evaporator into the fresh food section to promote even temperature distribution
• Protects the inlet opening and internal ductwork from damage and debris
• Prevents direct air leaks that can cause warm spots or reduced cooling efficiency
• Restores proper fit and reduces rattling or vibration from a loose or broken cover

• Disconnect power to the appliance before starting any repair
• Remove shelves or liners as needed to access the inlet area
• Handle plastic parts gently to avoid cracking; use basic hand tools for removal/installation

This defrost heater melts frost and ice buildup on the evaporator coil so your refrigerator can maintain proper airflow and cooling. Use this heater to restore normal defrost cycles and prevent excessive frost accumulation. What it does:

• Warms the evaporator coil during the defrost cycle to remove built-up frost and ice.
• Helps restore normal airflow through the evaporator for consistent cooling.
• Commonly replaced when excessive frost forms, ice blocks vents, or defrost cycles fail.
• Works with the oven/temperature control and defrost thermostat to clear ice safely.

• One defrost heater assembly.

• Disconnect power before starting and verify the unit is fully de-energized.
• Remove the evaporator cover and any shelving or panels needed to access the heater; handle evaporator fins carefully to avoid damage.
• Reassemble panels and restore power; run a manual defrost or monitor a cycle to verify operation.

This sound damper is a small vibration cushion designed to reduce noise and dampen vibration from moving components in the appliance, helping keep operation quieter and preventing parts from rattling against the cabinet. What it does:

• Cushions and isolates vibration to reduce humming, buzzing or rattling noises
• Helps stabilize small components and prevent metal-on-metal contact
• Protects surrounding parts from wear caused by excessive movement
• Supports quieter operation when installed in its intended location

• One sound damper

• Disconnect power to the appliance before accessing internal components
• Access may require removing an access panel or cover; keep fasteners organized
• Press-fit or slide into place as shown in the service diagram; avoid excessive force