Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Bushing that lines the upper hinge pin on refrigerator doors. Replace if cracked, worn, or missing to restore smooth door swing and proper alignment.
Replaced upper and lower thimble's, lever arm, cam closure. Door stop was not the problem, but ordered it and replaced it too. The door of course has to come off, remove the top hinge, and lift it away. Lubricated moving parts with silicone spray. Be sure and put the door back in the open position, so the lever arm and cam closure can properly interact, then close the door. Remove the plastic grate at the bottom to get at the lever arm. Presto. Problem gone. Don't put excessive weight... Read more
Replaces cracked or broken ice dispenser bucket in side-by-side refrigerators. Holds ice supply and feeds dispenser chute. Essential when damaged.
Watched your how to video. Ordered the parts and replaced them. Read more
RFID board reads filter chips to authenticate water filters and enable dispensing. Replace if filter light stays on or dispenser shows errors after installing new filter.
Slide-out freezer shelf restores storage capacity and organization. Replace if cracked, broken, or difficult to slide for smooth access to items.
Internal water supply tube for refrigerators. Routes water between components inside the unit. Replace if cracked, split, or leaking at fittings.
Replaced entire water supply system: ice maker water supply tube, water tank, solenoid, filter and filter head, water supply tubing. Read more
Refrigerator too cold or freezing food? The damper cover assembly controls airflow between compartments. Common DIY repair restores proper temperature.
Replaced the damper assembly at the top of the fridge compartment. Read more
Rubber grommet that mounts the evaporator or condenser fan motor to its bracket. Replace when worn, cracked, or missing to reduce vibration and noise.
Condenser fan stopped on my big 2003 Monogram 4 foot wide ZIS480D Refrigerator. It is top mounted. The fridge had to be rolled out. 20 screws removed and the top sheet metal to get at the condenser. That was the only way to get at it. Works like new now. Read more
White plastic clip that secures the rear of refrigerator shelves or drawer rails to the cabinet wall. Replace if cracked, broken, or missing.
I ordered my parts. It was a breeze thanks to appliancepartspros.com. I received the parts the next day. Installed them myself. Read more
Replaces worn freezer door gasket to restore airtight seal. Replace when cold air escapes or frost forms around door edges. Confirm fit by model number.
Removed old seal, installed new seal, used heat gun to expand new seal slightly for good fit. Coated with vaseline. Perfect fit. Easy installation. Read more
If your freezer is warm or you hear howling fan noise, the evaporator fan motor may need replacement. Moderate DIY repair taking 2-3 hours to restore cooling.
Replaced the evaporator fan motor. On line video did a good job showing how to remove and install the motor. It took about 2 hours to remove, 3 days to recieve the new part and 3 hours to put it in. Plugged in the refrigerator and looked at the freezer temp the next morning and the thermometer was at zero degrees F with good air flow. Refrigerato temperature is reading 40 degrees F. Read more
Replaces the damaged or missing edge trim on your freezer shelf. Snaps onto the shelf frame to provide a finished lip and restore its original appearance.
Replaced with new parts. Read more
This armature kit is the moving plunger and linkage operated by the dispenser solenoid. It opens and closes the ice chute door during dispensing and helps it seal when idle to reduce frost and warm-air leaks.
Replaced the water supply valve...boom! Read more
Fixes a refrigerator that stopped making ice, produces irregular cubes, or has a jammed icemaker. This assembly restores automatic ice production.
Fix a cracked or broken ice bucket glide that causes your bin to stick or misalign. This right-hand slide rail restores smooth drawer movement in 30 minutes.
It was very simple, took longer to unload freezer than to install glides Read more
The recess door retainer secures the dispenser's ice chute flapper in the refrigerator door. Replacing a cracked or missing retainer restores proper flapper pivot and sealing to help reduce frost buildup and air leaks around the dispenser.
Replaced springs, flapper assembly and ice door retainer as described in videos and it was easy. So far so good..water dispenses. Read more
Plastic water line that runs from the water valve to the icemaker fill tube. Replace if cracked, brittle, broken, or leaking at connection points.
Thanks to the AppliancePartsPro, I ordered it online and received it quickly. I even used the step by step directions on how to replace the tube from the AppliancePartsPro website. Just be very careful and review the instructions first. Couple of important things: 1. Take a picture of the existing wiring and tubes before you take them apart. 2. *if* you remove the wires ( red and white plugs) from the valve, make sure you plug them back in correctly. 3. Do not pull or push the tubes hard. Use... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.