Gss25ufmd Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Genuine Ge part

Terminal Housing

By: Ge

Part Number: WH12X497

Harness to corset & shifter

Genuine Ge part

This genuine replacement thimble door top restores the finished trim and secure fit at the top of the thimble/door opening. It helps keep the thimble aligned and prevents gaps that can allow debris or air leaks. What it does:

Replaces a cracked, chipped or worn top trim piece on the thimble/door opening
Helps hold the thimble in place and maintain a snug, even fit
Restores a clean finished appearance to the opening
Can reduce rattling or movement caused by a loose or damaged top trim

What's included:

One thimble door top

Install notes:

Disconnect power to the appliance before starting any work
Remove any retaining screws or clips and gently lift out the old trim; keep fasteners if undamaged
Align the new top trim into the opening and secure with the original screws or clips
If you encounter resistance, stop and confirm orientation to avoid cracking the replacement

Genuine Ge part

Cover Water Filter

By: Ge

Part Number: WR02X10621

Genuine Ge part

Tail Handle Sxs Bk

5.0 (1)

By: Ge

Part Number: WR12X10392

Do-It-Yourself Stories from Customers like You Broken dispenser funnel and broken dispense housing shield Sheldon V. • Piscataway , NJ • February 26, 2016

Followed the Video on AppliancePartsPros.com. It was a Breeze ! Super Easy! Just make sure when you doing anything Electrical; Unplug the Appliance! Read more

Genuine Ge part

Shelf Support (Single)

By: Ge

Part Number: WR2X4676

This shelf support secures an interior refrigerator shelf in place so food items stay level and storage remains organized. It replaces a cracked or worn support to restore proper shelf seating and stability. What it does

Holds a refrigerator shelf or shelf trim in the correct position to prevent sagging or tipping
Restores stable support for glass or wire shelving that no longer stays seated
Helps eliminate shelf movement that can cause items to slide or spill
Works where a broken, chipped, or missing support prevents proper shelf alignment

What's included One shelf support Install notes

Disconnect power to the appliance before starting any repair and empty the shelf area
Remove the affected shelf or trim to access the support; reinstall shelf to confirm correct seating
Use basic hand tools as needed and avoid forcing parts to prevent further damage
Replace all affected pieces for consistent shelf alignment

Genuine Ge part

Screw - Pkg 12

4.9 (9)

By: Ge

Part Number: WZ4X244D

Do-It-Yourself Stories from Customers like You Broken drawers Sarah P. • Bronx , NY • January 10, 2016

I removed the drawers and old rails, and screwed in the new ones. It was very straightforward. Read more

Genuine Ge part

Front Roller Screw

By: Ge

Part Number: WR01X10199

Genuine Ge part

Thrust Washer

5.0 (1)

By: Ge

Part Number: WR01X10202

Do-It-Yourself Stories from Customers like You Door would not finish closing on its own as it had before (exterior door "fresh food side") Alice H. • Wickenburg , AZ • August 18, 2017

1) By using google to find videos on why the door wouldn't close, I found out I needed new cams, those same videos also showed how to remove and replace the door. 2) Then by googling the fridge model number and the word 'cam', I was able to find the parts. 3) Taking the door off was simple, I needed a phillips head screwdriver to remove the hinge cover, however the screws in the hinge plate were so tight, I needed a side handle socket wrench to loosen them. 4) The door itself is not hard to... Read more

Genuine Ge part

Fastener Board

By: Ge

Part Number: WR02X10159

Genuine Ge part

Evaporator Thermistor Clip

4.5 (2)

By: Ge

Part Number: WR02X10552

Do-It-Yourself Stories from Customers like You Ge side by side psc25 series ff section was not cooling well (42 degrees best it could do) Robert B. • Morgantown , WV • October 19, 2014

Common theme on the blogs was thermistors and or defrost heater/thermostat. Ran self-diagnostics which turned on defrost heater which was fine. All five thermistors indicated ok on diagnostic also, but I read more than one time "replace the thermistors no matter what if your FF section isn't cooling". So I ordered all five thermistors and defrost limiter thermostat. Received all in 48 hours (great shipping service), took me about three hours to replace all thermistors and thermostat just as... Read more

Genuine Ge part

Hinge Cam Riser

5.0 (9)

By: Ge

Part Number: WR02X10568

Do-It-Yourself Stories from Customers like You Hinge cam riser broken on refridgerator door Gary I. • Versailles , MO • December 13, 2014

Simply removed top door hinge held in place with a screw and two small 5/16 inch bolts . Lifted the door off bottom hing . Replaced old cam riser with new cam riser . Replaced refridgerator door and top hinge . Adjusted door height with 5/16 wrench matching it with deepfreeze door . Patted myself on back for such a good repair job . Lol . I'm very pleased with part delivery time , less than 24 hours . Read more