Gss26c4xxf03 Parts

This user interface (UI) assembly controls the front touch/display functions on the appliance, restoring responsive controls and normal display operation for oven/range features. Replaces a worn, damaged, or unresponsive control panel. What it does:

• Provides the touchpads, display, and control logic for setting temperatures, timers, and modes
• Sends user commands to the oven/range control system so selected functions start correctly
• Commonly replaces a panel that is unresponsive, has missing or flickering display segments, or shows error codes related to the UI
• Restores visible button/indicator feedback and normal front-panel operation

• One user interface (UI) assembly (stealth) as shown

• Disconnect power at the breaker before starting to avoid shock or damage
• Handle the assembly carefully to avoid damaging the display or ribbon connectors
• Verify connector seating and routing; secure any mounting screws and trim after installation

Size: 3/16 inch.

Size: 5/16 inch.

Size: 3/8 inch.

Size: 3/4 inch.

This replacement cover is a molded housing piece that protects internal components and restores the appliance's exterior appearance. It keeps wiring and controls shielded while helping reduce noise and debris entry. What it does:

• Protects internal components and wiring from physical damage and contamination
• Helps reduce vibration noise and rattling by covering exposed parts
• Restores a finished appearance to the appliance cabinet or control area
• Can prevent loose parts from shifting during operation

• Disconnect power (unplug appliance or switch off breaker) before beginning service
• Use basic hand tools; support the appliance panel while removing fasteners
• Handle with care to avoid scratching painted surfaces or breaking tabs

This ice door covers the dispenser chute to help keep cold air in and prevent spills when the ice dispenser is not in use. Replaces a cracked, bent, or non-sealing chute door to restore normal dispenser operation. What it does:

• Seals the ice dispenser opening to reduce warm air and moisture from entering the freezer compartment
• Allows ice to pass through when actuated and stays closed otherwise to prevent drips and debris
• Helps stop ice from falling out or jamming when the dispenser is at rest
• Common symptom fixes: dispenser door won't close, visible cracks or damage, ice falling out, or excess frost near the chute

• One ice dispenser door

• Disconnect power to the appliance before beginning any repair
• Remove dispenser trim or access panel per your model's service instructions to reach the door assembly
• Handle plastic parts carefully to avoid cracking; confirm correct orientation before reassembly

This replacement clip secures the defrost heater to the evaporator so the heater stays in proper contact and defrosts frost buildup efficiently. Durable, OEM-style retention clip designed for refrigerators. What it does

• Secures the defrost heater to the evaporator assembly to ensure consistent defrost cycles
• Prevents the heater from shifting or coming loose, which can cause frost buildup or interrupted defrosting
• Helps maintain proper contact for efficient heat transfer during defrost
• Small, inexpensive part that can prevent larger ice/frost-related issues

• Disconnect power to the appliance before accessing the evaporator compartment.
• Handle the evaporator fins and heater element carefully to avoid damage.
• Typically installs with basic hand tools; replace any damaged or corroded clips.

This is an evaporator that is located inside many refrigerators. It has a part to play in ensuring the items inside the appliance stay cold. When the refrigerator turns from a liquid into a gas through evaporation, it cools the area nearby and makes it ideal for storing perishable food items. The evaporator pulls air from the refrigerator and blows it over the coils to keep it at the appropriate temperature. There are several signs that the evaporator is damaged or no longer working correctly. Sometimes it will make a chirping or squealing noise. It may cause the refrigerator to be too warm, which may cause issues with the food items inside. Frost buildup on the coils is also a bad sign. If the evaporator is damaged, it needs to be replaced. Unplug the refrigerator and remove the panel over the evaporator. Remove the clamps to uninstall the part. The new part can be installed in the same place. Make sure to test before use.This evaporator is made to be compatible with Maytag, Whirlpool, KitchenAid, and Kenmore refrigerators. It is directly sourced from the manufacturer and sold on an individual basis. This is an authentic OEM replacement component.

Size: 1/4 lb.

Size: 1/4 inch.

This ice bin latch assembly secures the refrigerator's ice container so it stays seated and aligned with the auger drive. Replace a worn or broken latch to restore consistent ice dispensing and a snug fit.

• Locks the ice bin in place and aligns it with the auger/dispenser drive
• Helps prevent the bin from wobbling, shifting, or popping loose
• Can resolve no or intermittent ice dispensing caused by bin misalignment
• Direct replacement when the latch is cracked, worn, or missing

• Disconnect power to the refrigerator; turn off the water supply if needed
• Remove the ice bin to access the latch area
• Release retaining tabs/fasteners, note orientation, and install the new latch assembly
• Verify smooth latch engagement before reinstalling the bin and restoring power

The Ice Chute Mounting Bracket is an OEM replacement part for Whirlpool side-by-side refrigerators. It securely positions the removable ice chute opening above the storage bin.

Causes for bracket failure involve standard wear from long-term usage. Repeated lifting of the chute subjects mounting screws and anchors to consistent force strains over many seasons. 

Symptoms requiring replacement involve:

• Loose, sagging or detached ice chute positioning
• Lost or stripped mounting fasteners  
• Ice jamming or spillage due to misaligned openings
• Safety hazards from potential pinch points

This authentic Whirlpool replacement is compatible with Jenn-Air, KitchenAid and Maytag panel-ready stainless steel refrigerators as well.