Gtd45ebmk0ws Parts

This plate motor drives the microwave/oven turntable, keeping the glass tray rotating for even cooking and heating. Replaces a worn or failed motor to restore tray rotation and reduce uneven heating. What it does:

• Turns the glass turntable so food cooks evenly
• Stops rotation or hesitates when motor fails or wears out
• May make buzzing, grinding, or intermittent noises before failing
• Prevents the turntable from rotating if the motor no longer engages

• One replacement plate (turntable) motor

• Disconnect power before servicing to avoid shock; verify unit is fully powered off
• Remove the turntable glass and roller guide to access the motor underneath the oven/microwave floor
• Typical install requires removing interior fasteners and unplugging the motor connector; retain hardware for reassembly

This blower housing assembly directs airflow from the dryer motor to the drum and exhaust, restoring proper venting and drying performance. It replaces a damaged or cracked housing to help the dryer move air efficiently. What it does:

• Channels airflow from the motor to the lint filter and exhaust duct
• Supports the blower wheel and maintains correct blower clearance
• Helps prevent air leaks that can cause poor drying or overheating
• Commonly replaced when the housing is cracked, warped, or excessively worn

• One blower housing assembly as shown

• Disconnect power before beginning any repair; ensure the dryer is unplugged or its breaker is off
• Removal may require access panels and disconnection of the blower wheel and motor mounting hardware
• Inspect and clean nearby lint and venting while the dryer is disassembled

This motor strap secures the appliance motor to the cabinet, keeping the motor stable during operation to reduce vibration and noise. Use this replacement to restore proper motor positioning and support in compatible models. What it does:

• Holds the motor firmly in place to prevent movement or shifting during use
• Helps reduce vibration and associated noise caused by a loose motor
• Maintains correct motor alignment so belts and linkages run smoothly
• Commonly used when a worn or broken strap allows motor sag or misalignment

• One motor mounting/retaining strap

• Disconnect power to the appliance before beginning any work
• Inspect mounting points and fasteners; replace any damaged hardware as needed
• Secure strap to the motor and cabinet using the original mounting holes and recommended hardware

This is a genuine GE replacement screw used to secure appliance panels and components, restoring proper fit and reducing vibration or rattling. A simple fastener that helps keep assemblies aligned and functioning safely. What it does:

• Secures panels, brackets, and small components in place
• Prevents noise from loose parts and maintains structural alignment
• Restores proper fastening after repairs or wear
• Matches OEM fit for reliable replacement

• Disconnect power to the appliance before accessing internal parts
• Use the correct screwdriver or driver bit to avoid stripping the head
• Thread carefully and tighten until snug; do not overtighten to prevent damage
• Replace any damaged or missing fasteners with the same OEM part for best results

This rotary switch is a direct-replacement selector used to change appliance settings—restores proper selection and reliable control of cycles, temperatures or speeds. Ideal when the control dial does not respond or shifts inconsistently. What it does:

• Selects operating settings when the control knob is turned
• Routes power/signals to the chosen function or temperature range
• Replaces worn or intermittently working selector contacts
• Helps resolve symptoms like no response when turning the knob, settings that don't change, or inconsistent operation

• Disconnect power before servicing to prevent shock or injury
• Access may require removal of the control panel; retain screws and hardware
• Transfer the existing control knob and any mounting hardware
• Secure connections; test function before full reassembly

This motor support is the stamped metal bracket that secures the dryer motor and blower assembly, keeping components aligned for smooth operation. It restores proper motor mounting and reduces noise from loose or misaligned parts. What it does:

• Holds the dryer motor and blower housing in the correct position to prevent wobble or misalignment
• Helps maintain proper blower alignment for effective air movement
• Supports safe, reliable motor operation when the original bracket is bent, cracked, or worn

• Disconnect power (unplug electric or shut off gas and breaker) before beginning repair
• Access requires opening the dryer cabinet and removing the drum and/or front panel on many models
• Inspect related components (motor mounts, blower wheel, idler, belt) and replace if damaged

This electronic support control board replaces a failed dryer control module to restore proper cycle selection and electronic functions. It mounts behind the console and routes signals between user controls and the dryer's power components. What it does:

• Receives inputs from the user control and sends commands to the timer, heating element/valve, and motor circuits.
• Helps manage cycle selection, start/stop, and timed functions.
• Works as part of the dryer's control system—does not include service diagnostics or additional modules.

• One support pc board (single control board only)

• Unplug the appliance before starting; disconnect power at the breaker for hard-wired units.
• Handle the board by its edges and avoid touching components to reduce ESD damage.
• Transfer any mounting brackets, harnesses, or shields from the old board if not pre-attached.

A replacement silicon controlled rectifier (SCR) that restores electronic power switching in the appliance's control circuitry. This SCR provides reliable on/off switching for motors or heating circuits when the original SCR has failed. What it does:

• Acts as an electronic switch to control power delivery to heating elements or motors
• Commonly fails when the appliance has no heat, intermittent operation, or won't run consistently
• Replaces a burned, shorted, or open SCR to restore normal control-board switching behavior
• Helps stop arcing or erratic performance when the original semiconductor has degraded

• For safety, disconnect power before accessing control electronics or replacing the SCR
• Handle the SCR and circuit board carefully to avoid ESD damage; use proper grounding if available
• Verify correct orientation and secure mounting; ensure all wiring and connectors are seated properly

This orange jumper harness routes signals and power between wiring harness sections to restore proper electrical continuity. It's a direct-fit replacement that helps clear connection faults and re-establish reliable component communication. What it does:

• Provides a clean, color-coded connection between harness points to maintain circuit continuity
• Replaces damaged or brittle wiring that can cause intermittent operation or loss of function
• Prevents open circuits and improves connector seating for reliable appliance performance
• Used where a short harness run or jumper is required to bridge terminals

• Unplug the appliance or disconnect power before beginning work
• Match wire colors and connector shapes to the original; ensure connectors are fully seated
• Inspect surrounding wiring and connectors for heat or damage and replace if needed