Gte181shdrss Parts

Restore accurate temperature regulation with this cold control kit. It replaces a worn or unresponsive refrigerator temperature control so the unit cycles on and off correctly and maintains food-safe, consistent cooling.

• Regulates internal temperature by cycling the compressor and fans based on setpoint
• Helps resolve symptoms like fridge too warm, too cold, or not cycling off
• May correct intermittent cooling or temperature swings due to a failed control
• Designed as a service kit to update or replace the original cold control assembly

• Unplug refrigerator before service; handle sharp sheet metal with care
• Access control from the fresh food control housing; note wire positions and capillary routing
• Avoid kinking or sharply bending the capillary tube during removal/installation
• After installation, set to a mid setting and allow 24 hours to stabilize temperature

This replacement door shelf bar restores the front rail on the refrigerator's fresh food door shelf, helping keep bottles and jars contained and organized when the door opens and closes.

• Forms the front rail of a fresh food door shelf to hold items in place
• Replaces a cracked, loose, or missing bar
• Snaps into the existing end slots on the door

• Remove items from the affected door shelf before replacement
• Align the bar with the door's end slots and press until it locks securely
• Always follow appliance safety practices; disconnect power if working near internal components

This flip-up dairy door covers the refrigerator's dairy compartment. Replace a cracked or missing cover to keep butter, cheese, and other small items organized and protected while restoring a clean, finished look to the fresh food door.

• Attaches to the dairy bin on the fresh food door and flips up/down for access
• Helps keep contents contained and protected during door opening/closing
• Restores proper hinge/latch engagement so the bin stays closed
• Common symptoms: cracked cover, broken hinge tabs, loose hinge, or missing door

• Empty the dairy bin and remove the old cover
• Align hinge tabs with the bin's pins and snap into place; no tools typically required
• Handle carefully; if very cold, let the plastic acclimate to room temperature before installation
• Open and close to confirm smooth operation and full seating

The Fresh Food Door Gasket is an OEM part for GE refrigerators. This rubber-sealing gasket lines the perimeter of the fridge's fresh food compartment door. It creates an insulation barrier that helps maintain optimal interior temperatures.

Causes of a bad door gasket can include breaks, cracks, or compression set warping that occur from years of constant cooling and shutting. Exposure to food spills can degrade integrity over time as well.

Symptoms include: 

• Cold air feeling drafts around the door seal
• Condensation visible on door surfaces from air leaks   
• Noticeable temperature fluctuations inside the fridge section

This GE OEM replacement restores the critical moisture and cool air seal essential for refrigerator efficiency. Compatible with later produced Hotpoint, RCA, and Kenmore side-by-side models for a direct factory fit and performance enhancement. Rely on it to optimize energy usage and food freshness.
 

Restore accurate cooling with this refrigerator temperature control thermostat. The cold control senses compartment temperature and opens or closes the circuit to cycle the cooling system, helping maintain your selected setting when the original control becomes unreliable.

• Monitors refrigerator air temperature via a sensing bulb
• Opens/closes electrical contacts to cycle the cooling system
• Maintains the temperature you select with the control knob
• Common symptoms of a failing control: temperatures too warm or too cold, refrigerator runs constantly or won't start, no response to knob adjustments

• Disconnect power to the refrigerator before servicing
• Access the control housing and note wire locations and the exact routing/placement of the sensing bulb
• Transfer any mounting hardware and the control knob from the old part; install the new thermostat
• Route and secure the sensing bulb exactly as original—do not kink the capillary; restore power, set to a mid setting, and allow temperatures to stabilize before fine-tuning

This freezer shelf assembly restores stable, level storage space in the freezer compartment. Replace a cracked or missing shelf to keep food organized and maintain proper spacing for consistent cold-air circulation.

• Provides a sturdy, level surface to store and organize frozen items
• Helps maintain proper airflow and spacing for efficient cooling
• Replace if the shelf is cracked, bent, broken, or missing
• Common signs include sagging under normal load or not staying seated in side supports

• Unplug the refrigerator before servicing
• Remove items from the area, then lift/slide the old shelf out of the side supports or tracks
• Position the new shelf in the same slots and fully seat both sides
• Verify the shelf is level and secure before loading items

This reversible door plug fills the unused mounting hole when you switch the door swing on your refrigerator. It restores a finished appearance and helps keep air and moisture from entering through the opening.

• Covers the unused door hole created during a door swing reversal
• Helps maintain proper sealing and resists drafts/condensation at the opening
• Restores a clean, finished, factory look to the door
• Common symptoms: missing or cracked plug, exposed hole, cosmetic gap on door edge

• Disconnect power before servicing any door components
• Gently pry out the old plug with a plastic trim tool to avoid scratches
• Align the new plug with the opening and press until fully seated and flush
• Verify the door closes properly and the gasket seals evenly

This bottom hinge supports the refrigerator door at the lower pivot point, keeping it aligned so it opens smoothly and seals correctly. Replace a worn hinge to restore proper closure and help maintain an airtight door seal.

• Provides the lower pivot and support for the door
• Helps maintain alignment for consistent gasket contact and smooth swing
• Wear or damage can cause door sagging, rubbing, or incomplete closure
• Misalignment can lead to air leaks and temperature fluctuations
• Clicking, grinding, or loose movement near the hinge may indicate wear

• Unplug the refrigerator; turn off water to the dispenser/ice maker
• Remove door bins/contents and support the door to prevent strain on wiring or tubing
• Remove the lower hinge cover, note shim/spacer locations, and transfer them to the new hinge
• Reinstall hardware, align the door, and ensure the gasket seals evenly all around

The Overload Ptcr Combo is an OEM part for GE refrigerators. It is responsible for regulating the electrical current flowing to the compressor. It helps prevent damage to the compressor and extends its lifespan.

A bad overload ptcr combo can be caused by power surges, electrical malfunctions, or normal wear and tear over time.

Symptoms of a bad overload ptcr combo include:

• The refrigerator not cooling properly.
• The compressor making unusual noises or not running at all.
• Excessive heat around the compressor area.
• Frequent tripping of the circuit breaker.

Replace your worn-out or damaged overload ptcr combo with this genuine OEM part and ensure the efficient and reliable operation of your refrigerator's compressor. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This is a grommet and it is intended for use on refrigerators and freezers. This is a genuine replacement part made by General Electric. A new grommet might be needed if the current one is visibly worn out or damaged in any way. If there are noises from vibration coming from the lower back area of the fridge there might be need for a new grommet. This is an OEM part sourced directly from the manufacturer, and it is sold individually. It is compatible with refrigerators and freezers, or units with a compressor and is made by General Electric.

This replacement clamp secures lines or components inside the refrigerator, keeping them properly routed and stable. Replacing a broken or missing clamp helps reduce vibration and prevents rubbing damage or leaks from loose tubing. What it does:

• Holds tubing or wiring harnesses securely in place inside the refrigerator
• Maintains correct routing and clearance to prevent chafing and wear
• Helps reduce vibration and rattling noises from unsecured lines
• Can help prevent drips or leaks when used to retain water tubing

• 1 clamp

• Unplug the refrigerator and, if working with water lines, shut off the water supply
• Note the original clamp orientation and routing; take a photo before removal
• Install the new clamp in the same location, securing lines without pinching or over-stressing them
• Restore power (and water if applicable) and check that lines are secure; inspect for leaks if used on water tubing

The Condenser Fan & Housing is an OEM replacement part for GE refrigerators. It is responsible for circulating air across the condenser coils, dissipating heat and providing proper airflow and cooling for your refrigerator.  

A bad condenser fan and housing can occur due to wear and tear over time or damage caused by mishandling or accidents. If you notice symptoms such as excessive heat in your refrigerator, reduced cooling performance, or unusual noises coming from the back of the unit, it may indicate a need to replace the condenser fan and housing.

Symptoms of a bad condenser fan and housing include:

• Excessive heat inside the refrigerator
• Reduced cooling efficiency
• Unusual noises, such as grinding or squealing sounds

Restore your refrigerator by replacing the faulty condenser fan and housing with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This small donut-shaped gasket fits where specified in your refrigerator's parts diagram to create a tight seal between mating components. Replacing a worn gasket helps stop minor leaks and restore a secure fit.

• Forms a tight seal at the designated joint or fitting
• Helps prevent seepage or drips from a compromised connection
• Replaces a brittle, cracked, flattened, or missing original gasket
• Supports proper assembly alignment and a snug fit

• Unplug the refrigerator and, if servicing the water system, shut off the water supply
• Note the gasket's original placement and orientation before removal
• Clean mating surfaces; lightly moisten the new gasket to ease seating
• Reassemble without overtightening; restore power/water and check for leaks

The Control Temp is an OEM component specifically designed for GE refrigerators. It enables precise temperature regulation within the refrigerator. 

The control temperature sensor monitors interior conditions and sends feedback to the control board regarding temperature deviations. Based on sensor readings, the board triggers the cooling system accordingly to maintain the desired set point. 

Symptoms of a bad control temp sensor include:

• Fluctuating interior temperatures that cannot be stabilized
• The cooling system running inconsistently or excessively  
• Inability to accurately adjust or maintain set temperature levels

Causes can relate to sensor failure over time due to age, thermal stress from freezing/thawing, or physical damage.

This genuine OEM GE replacement part ensures the control system has accurate temperature input to function optimally. Compatible with Hotpoint, RCA, and Kenmore refrigerator models as well. Replace yours to restore reliable cold storage performance.
 

The Air Tower and Evaporator Cover Assembly is an OEM part for GE refrigerators. This multi-piece component is located inside the refrigerator compartment and manages airflow that travels through the evaporator coil area. An attractive cover protects inner workings while directing optimal temperature control.  

Symptoms of a bad air tower assembly include:  

• Audible air disturbances accompanied by inconsistent interior temperatures
• Buildup of frost or moisture collecting outside the evaporator area
• Inability of warm food to adequately cool down inside the fridge  

Causes relate to cracks developing in thermoplastic covers after years of climate cycling strains. Closed airways may become obstructed as well affecting circulation.

This GE OEM replacement restores reliable humidity management and product cooling. Its enduring construction circulates purified air for consistent food holding at proper temperatures per federal guidelines. Compatible with GE and select Kenmore side-by-side models for direct fit airflow performance.
 

This plastic water tube routes water inside your refrigerator to the dispenser and/or ice maker. Replacing a cracked, brittle, or leaking tube restores proper water flow and helps prevent leaks and water damage.

• Directs water between components such as the inlet valve, reservoir, door, dispenser, or ice maker (varies by model)
• Maintains a sealed, food-grade path to prevent leaks and air intrusion
• Damage can lead to puddles behind/under the fridge or inside the fresh food compartment
• Common symptoms: slow/no dispenser flow, ice maker not filling or making small cubes, visible cracks/kinks

• Unplug the refrigerator and shut off the household water supply; relieve line pressure at the dispenser
• Note tube routing and connection points before removal; avoid sharp bends and kinks during install
• Cut tube ends square and fully seat into compression or push-in fittings
• Restore water, check all joints for leaks, and run water to purge air from the system