Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fixes noisy fan, ice buildup, or warm fridge temps. This evaporator fan motor circulates cold air between compartments. DIY-friendly repair, 1 hour.
Went on line to check troubleshooting sites, then went on UTube to watch a video on how to repair the appliance, then ordered the part from you, the used the video as a guide to replace the part. worst part was getting the clip off the fan blades and the putting it back on Read more
Rubber grommet that seals and cushions where the evaporator fan motor shaft mounts. Replace if cracked, worn, or missing to eliminate noise and vibration.
It was after 11:00 at night a few nights ago, I couldn't sleep listening to the whining of the fan in the freezer, it was running and making noise sounding like waaoooww, waaaoww. It also sounded like grumbling of a garbage disposal. The refrigerator fan motor was so noisy it was keeping me up all night going on and off running really loud and about to fail. So I was desperate, and called AppliancePartsPros when I couldn't get to sleep near midnight because the fan was so noisy and Bud in... Read more
Replacement glass shelf for refrigerator compartments. Installs in shelf frame to hold food items. Order when original glass is cracked or shattered.
Ordered a new glass shelf. Read more
Refrigerator not cooling evenly or making noise? The evaporator fan blade circulates cold air. Simple press-on installation in under 30 minutes.
Replace a broken, cracked, or missing door shelf rail on your refrigerator. This rail secures items on door shelves, preventing them from falling out.
Snap in Read more
Replacement vegetable crisper drawer for refrigerator fresh food compartment. Installs on existing slides. Order when original is cracked, broken, or missing.
Replaced them and added the shelf / rail Read more
Creates an airtight seal around your freezer door to maintain proper temperature and prevent ice buildup. Replace if cracked, torn, or not sealing properly.
Replaced with OEM replacement seal. Watched video on appliance parts pro which showed the proper process to remove the old seal and install a new seal. Surprisingly, it was very quick and only took about 15-20 minutes, including removing the freezer door and re-installing freezer door after seal installation. Unfortunately, a new seal did not cure my problem. 4 days later, I have ice building up again. I studied the new seal and noted there are small gaps at the corners of the freezer... Read more
Seals refrigerator door to prevent air leaks and maintain temperature. Replace if torn, sticky, or condensation forms around door. Press-in installation.
New seals installed. Read more
Seals refrigerator door to keep cold air in and warm air out. Replace if cracked, torn, or causing condensation. Verify fit with your model number.
Replaced the gaskets on refrigerator and freezer doors. Read more
Replace your freezer door gasket to restore the tight seal that keeps cold air in and warm air out. Fixes condensation, ice buildup, and energy waste.
Fix interior lights that won't turn on, stay on constantly, or delay when opening the door. This switch replacement takes 10-15 minutes with basic tools.
Our refrigerator takes care of my wife and I, along with our children when they visit, and the grand kids. Over the years, it's seen its fair share of wear and tear. Thankfully, nothing major has happened that hasn't been able to be repaired right here in the home, and by me. Our refrigerator is a GE side-by-side with an ice maker/water dispenser, and has held up well. I've ordered parts for it from AppliancePartsPros.com for all of its repairs, and while GE/Frigidaire have been changing out a... Read more
The Lid Bumper is an OEM part for GE refrigerators. It is designed to provide cushioning and protection for the refrigerator lid, preventing damage and ensuring smooth, quiet closing.
Causes of a bad Lid Bumper can include deterioration over time due to frequent use, exposure to temperature variations, or damage from accidental impacts. A worn or damaged bumper may no longer provide adequate cushioning, leading to potential damage to the lid or the refrigerator itself.
Symptoms of a bad Lid Bumper include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Changed fan motor, rubber grommets, and dust cover. It sounded like the vibrating sound was being caused by the motor. But, come to find out I had a chipped blade on one of the fan blades. So make sure and check the fan blade first. Thanks Appliance Parts Pros everything for just as it should. Read more
Clear snap-in dairy door bin for refrigerator compartments. Replace if cracked, broken, or missing to organize and separate dairy items in door storage.
Easy fix Read more
Bottom hinge pin secures the refrigerator door at the base, allowing smooth opening and closing. Replace if worn, damaged, missing, or door sags.
Replaced Hinge bracket, Hinge pin, and spacers, Read more
Door shelf bar secures to the refrigerator door liner to hold condiments and small items. Replace if cracked, broken, or if retaining clips are damaged.
Yeah simple. Read more
Mounting hardware kit that secures refrigerator or freezer door handles. Restores solid grip when original fasteners are missing, damaged, or stripped.