Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fixes heavy frost buildup on evaporator coils and warm fresh food compartment. Clips onto evaporator assembly. Straightforward DIY with video guide.
The defrost heater element looked good and had continuity. The defrost thermostats checked good, so that just left the Defrost Module as the likely suspect. I installed a new defrost control module and thermostats. The thermostats were inexpensive and the old ones could have been intermittent, The only "tricky" part was finding out how to get to the back screw that holds the main control panel. Discovered that the return air duct surrounding the control panel needed to come off. It helps... Read more
Fix a warm fridge or freezer ice buildup. This defrost heater melts frost on evaporator coils to restore cooling. Moderate DIY repair, 1-2 hours.
Replaced defrost heater, temperature and defrost limiter thermostat. After taking the cover off the air chiller I found the coils frozen solid and defrosted it with a hair dryer. Once defrosted I remover the heater coil to test it it was fine, then I could see the defrost limiter was broken and as I put the unit back together I broke the heater tube (it is glass) so I ordered all the parts that might be defective and replaced them for less than the charge of having some one come to check it out. Read more
Replacement dairy compartment door for refrigerator door storage. Needed when original is cracked, broken, or missing. Installs in door compartment.
Ordered the part, came in a few days, lined up the holes and it popped right in. Read more
The Lid Bumper is an OEM part for GE refrigerators. It is designed to provide cushioning and protection for the refrigerator lid, preventing damage and ensuring smooth, quiet closing.
Causes of a bad Lid Bumper can include deterioration over time due to frequent use, exposure to temperature variations, or damage from accidental impacts. A worn or damaged bumper may no longer provide adequate cushioning, leading to potential damage to the lid or the refrigerator itself.
Symptoms of a bad Lid Bumper include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Changed fan motor, rubber grommets, and dust cover. It sounded like the vibrating sound was being caused by the motor. But, come to find out I had a chipped blade on one of the fan blades. So make sure and check the fan blade first. Thanks Appliance Parts Pros everything for just as it should. Read more
Replacement handle for your refrigerator's fresh food compartment door. Needed when the original handle is cracked, broken, yellowed, or damaged at screw points.
Could not clean yellowed door handles. Knew re-paint would look cheap. Bought both GE factory handles with shipping for a very fair price and had them in 2 or 3 days during the Christmas rush. I will definitely buy from this company again. Read more
Freezer fan loud or not spinning? This evaporator fan blade circulates cold air over the coils. DIY-friendly repair with our video guide.
I had found that the fan in the freezer was making a lot of noise. Turns out the shaft was loose, causing the flan blade to wobble. Replaced the motor and fan and now it runs like a new unit. Read more
Replacement freezer door handle for refrigerators. Installs on freezer compartment door. Replace if cracked, broken, yellowed, or difficult to clean.
Freezer door gasket creates an airtight seal to prevent cool air loss and maintain temperature. Replace when torn, worn, or door won't close properly.
I replaced the gasket and have a technician lift the door back to the original position. Read more
Bottom hinge pin secures the refrigerator door at the base, allowing smooth opening and closing. Replace if worn, damaged, missing, or door sags.
Replaced Hinge bracket, Hinge pin, and spacers, Read more
Refrigerator won't cool or compressor won't start? This compressor start relay and overload powers the compressor during cooling cycles. DIY repair.
We isolated a burning smell in our kitchen to our refrigerator, GE Profile PSS23MGTCCC which we purchased in November of 2006. This occurred at 3AM on 29 January 2015 and I am thankful that my wife got me up to investigate this odor. I unplugged the refrigerator. I plugged the refrigerator back in at 6AM thinking it had time to cool. The burning smell happened immediately and I unplugged the refrigerator again right away. My son in-law looked up some possible issues that could have... Read more
Small washer that fits on refrigerator door hinges to distribute weight and reduce friction. Replace if worn, cracked, or missing to restore proper alignment.
New Door Handle and the plastic spacers Read more
Mounts the evaporator fan assembly inside the freezer compartment. Replace if cracked, broken, or damaged from repeated fan motion or temperature stress.
WE REPLACED THE FAN MOTOR, FAN, MOUNTING BRACKETS, AND GROMMETS. Read more
Replacement screw for refrigerators. Secures handles, panels, and internal components. Order if yours is missing, stripped, or lost during repairs.
Took about 5 min to replace the handle with the parts ordered. Thank you for the fast service. Read more
Refrigerator door gasket seals the fresh food compartment to maintain temperature and efficiency. Replace if torn, loose, or not sealing properly.
Replaced door seal Read more
Insulating foam duct that directs cold air from the evaporator through the fresh food compartment. Replace if cracked, compressed, or missing.
Condenser fan motor sounded like a dying animal. Ordered a new motor, fan blade and grommets. The fridge sounds so much better, it's hard to tell it's on. Took 20 minutes, most of it cleaning. Read more
Assembly screw kit for refrigerators. Secures handles, shelf tracks, door hinges, and interior panels. Replace missing, stripped, or lost screws.
Replaced handles Read more