Gts18hynrfs Parts

This leveling leg supports and stabilizes the refrigerator cabinet. Adjusting it keeps the unit level so doors align and seal correctly, helping reduce vibration and noise for smoother, more reliable performance.

• Threads into the base to support and level the appliance
• Allows height adjustment for proper door alignment and gasket contact
• Helps reduce rocking, vibration, and rattling noises
• Resolve issues like doors not closing fully, uneven gaps, or a wobbly cabinet

• Disconnect power and move the appliance carefully to access the leg
• Use a helper and protect flooring; tip the unit slightly and support it securely
• Unthread the old leg; hand-thread the new leg, then adjust as needed with a wrench
• Level front-to-back and side-to-side; avoid cross-threading or overtightening

This reversible door plug is a small trim cap that fills the unused holes on a refrigerator door after changing the door swing. It restores a clean, finished look and helps keep dust and moisture out.

• Covers unused hinge/handle screw holes created during a door reversal
• Press-fit cap designed to match lighter gray door trim
• Helps maintain appearance and reduce entry of dirt and moisture
• Replace if missing, cracked, discolored, or won't stay seated

• Disconnect power if removing or repositioning the door/hinges
• Use your model's parts diagram to confirm the plug location and color
• Align with the hole and press in by hand until flush with the surface
• Do not force; verify correct part if the plug will not seat properly

The Control Knob is an OEM part for GE refrigerators. This knob is responsible for adjusting and controlling various settings on your refrigerator, such as temperature or function selection.

A bad control knob can be caused by normal wear and tear, accidental damage, or a malfunctioning internal mechanism. If you experience difficulties in accurately adjusting or selecting the desired settings on your refrigerator, it may be time to replace the control knob.

Symptoms of a bad control knob include:

• The knob feels loose or wobbly when turned
• Inaccurate temperature adjustments
• The knob gets stuck or does not turn smoothly
• The knob is cracked, broken, or missing

Replace your faulty control knob with this genuine OEM part to restore your refrigerator. 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This handle mount bushing supports and spaces a refrigerator door handle on its mounting stud, keeping the handle aligned and secure. Replace a cracked or missing bushing to eliminate wobble and restore a tight, flush handle fit.

• Centers the door handle on its mounting stud/post
• Maintains proper spacing so the handle sits flush to the door
• Provides a solid seat for handle fasteners to hold securely
• Failure can cause a loose, wobbly, or misaligned handle

• Open the door and support the handle; protect the finish with tape or a cloth
• Loosen the handle fasteners (set screws or similar) and lift the handle off the studs
• Remove the damaged bushing; seat the new bushing fully on the stud or in the handle base
• Reinstall and align the handle; tighten fasteners evenly without overtightening

This small hardware clamp is used on select refrigerators to secure tubing or wiring to the cabinet or frame. Replaces a missing or damaged clamp to keep lines stable, reduce vibration, and help prevent rubbing or leaks.

• Secures small water tubing or electrical harnesses along the cabinet/frame
• Helps prevent vibration, rattling, and abrasion of lines
• Maintains correct routing to keep lines clear of moving or hot components
• Common clues: loose or noisy lines, chafing marks, or moisture near tubing connections

• Unplug the appliance and shut off the water supply before servicing
• Note the original location and routing; take a photo for reference
• Reuse the existing mounting screw/fastener if required; tighten only enough to hold without crushing tubing
• Restore power and water, then run and inspect for vibration and leaks

This hex-head screw secures dishwasher panels, brackets, and internal hardware so parts stay tight and rattle-free. Replace missing or stripped fasteners to restore a secure fit and reliable operation.

• Fastens panels, brackets, and other dishwasher components to the tub or frame
• Replaces a missing, stripped, or corroded screw that no longer holds securely
• Helps eliminate vibration and rattling caused by loose hardware
• Maintains proper alignment and secure mounting of parts during operation

• Disconnect power and shut off water supply before servicing
• Keep track of fastener locations and orientation for correct reassembly
• Start threads by hand; use an appropriate nut driver or socket to tighten
• Tighten snugly—do not overtighten, especially when threading into plastic

This gasket supply foam is a replacement foam seal strip used to restore a refrigerator door or cabinet seal cushion for a tighter fit and improved temperature control. It helps reduce drafts and keeps fresh food fresher. What it does:

• Replaces worn or compressed foam that can allow air leaks around the door or compartment
• Restores the gasket's shape and cushioning to improve door sealing performance
• Helps reduce humidity build-up and cycling from frequent compressor starts
• Addresses symptoms such as visible gaps, cold loss, frost buildup, or higher energy use

• Remove old foam and any adhesive residue before installing the new strip
• Use appropriate gasket adhesive and follow manufacturer instructions if required
• Work with the appliance unplugged or power turned off; keep fingers clear of pinch points

A top door hinge and pin assembly that supports the refrigerator/freezer door and lets it pivot smoothly for reliable opening and closing. Replaces a worn or damaged top hinge to restore proper door alignment and seal. What it does:

• Provides a durable pivot point so the door swings open and closed smoothly
• Restores proper door alignment to help the gasket seat and maintain cooling
• Stops squeaks, sticking, or uneven door movement caused by a worn hinge
• Supports the door weight to prevent sagging or dragging

• One hinge top and pin assembly

• Disconnect power to the appliance before starting work and keep stored food safe
• Remove items from the door and support the door while replacing the hinge (two people may be needed)
• Retain any mounting screws; replace only parts explicitly shown in OEM documentation

Specs: 8-32 ca hxw 1/2

A small plastic thimble that fits behind a push-style control button to hold it squarely in the housing and restore smooth button travel. Replaces a worn or missing retainer to improve button feel and alignment. What it does:

• Secures push-style control buttons in the panel to stop wobble or uneven movement
• Restores proper button travel so controls depress and release cleanly
• Helps keep the button centered in its bezel for consistent operation
• Addresses symptoms like buttons that fall out, sit crooked, or don't return smoothly

• Disconnect power to the appliance before beginning any repair
• Remove the knob or access the control panel per your model's service instructions
• Press the thimble into the button housing until it snaps or seats fully; then reinstall the button/knob

This metal compressor mounting clip secures the refrigerator compressor to the base, helping keep the unit stable and reducing vibration transfer. Replaces a worn or broken clip to restore proper compressor alignment and quieter operation. What it does:

• Secures the compressor to the cabinet/base to prevent movement during operation and transport
• Helps reduce vibration and rattling that can indicate a loose or damaged mount
• Keeps the compressor aligned so refrigerant lines and mounting hardware remain correctly positioned
• Useful when the original clip is bent, cracked, or missing

• One compressor mounting clip

• Disconnect power to the appliance before beginning any repair
• Support the compressor before removing or installing the clip to avoid strain on lines or fittings
• Use appropriate hand tools; avoid over-tightening fasteners which can cause damage
• Replace rubber grommets or insulation if present and damaged for best vibration isolation

This rear access cover protects the refrigerator's back components and provides a clean finished look. It replaces a cracked, broken or missing rear panel so wiring, the compressor and connections stay covered and less exposed. What it does

• Shields compressor, wiring and rear components from dirt and accidental contact
• Helps prevent drafts and debris from reaching internal parts
• Reduces rattles or vibration noise caused by loose or damaged panels
• Restores the factory appearance at the back of the appliance

• Disconnect power before starting any work and move the appliance away from the wall for access
• Use appropriate screwdrivers; retain or replace mounting screws as needed
• Handle edges carefully to avoid cuts; align clips/tabs before fastening
• Refer to the manufacturer's instructions for specific fitment and mounting details