Gts22kgnbrbb Parts

This reversible door plug fills the unused mounting hole when you switch the door swing on your refrigerator. It restores a finished appearance and helps keep air and moisture from entering through the opening.

• Covers the unused door hole created during a door swing reversal
• Helps maintain proper sealing and resists drafts/condensation at the opening
• Restores a clean, finished, factory look to the door
• Common symptoms: missing or cracked plug, exposed hole, cosmetic gap on door edge

• Disconnect power before servicing any door components
• Gently pry out the old plug with a plastic trim tool to avoid scratches
• Align the new plug with the opening and press until fully seated and flush
• Verify the door closes properly and the gasket seals evenly

This bottom hinge supports the refrigerator door at the lower pivot point, keeping it aligned so it opens smoothly and seals correctly. Replace a worn hinge to restore proper closure and help maintain an airtight door seal.

• Provides the lower pivot and support for the door
• Helps maintain alignment for consistent gasket contact and smooth swing
• Wear or damage can cause door sagging, rubbing, or incomplete closure
• Misalignment can lead to air leaks and temperature fluctuations
• Clicking, grinding, or loose movement near the hinge may indicate wear

• Unplug the refrigerator; turn off water to the dispenser/ice maker
• Remove door bins/contents and support the door to prevent strain on wiring or tubing
• Remove the lower hinge cover, note shim/spacer locations, and transfer them to the new hinge
• Reinstall hardware, align the door, and ensure the gasket seals evenly all around

This replacement can shelf restores secure, organized storage for beverage cans in your refrigerator. It replaces a cracked, loose, or missing bin so cans stay in place and are easy to access.

• Holds beverage cans securely to help prevent tipping and spills
• Replaces a cracked, warped, or missing shelf/bin
• Restores original storage capacity and organization
• Installs using existing slots/tabs—no modifications required

• Remove the damaged shelf and clean the mounting area
• Align the new shelf's tabs with the slots and press evenly until it locks in place
• Do not force; seat both sides evenly to avoid breaking tabs
• After installation, avoid overloading to prevent damage

This is a grommet and it is intended for use on refrigerators and freezers. This is a genuine replacement part made by General Electric. A new grommet might be needed if the current one is visibly worn out or damaged in any way. If there are noises from vibration coming from the lower back area of the fridge there might be need for a new grommet. This is an OEM part sourced directly from the manufacturer, and it is sold individually. It is compatible with refrigerators and freezers, or units with a compressor and is made by General Electric.

This replacement clamp secures lines or components inside the refrigerator, keeping them properly routed and stable. Replacing a broken or missing clamp helps reduce vibration and prevents rubbing damage or leaks from loose tubing. What it does:

• Holds tubing or wiring harnesses securely in place inside the refrigerator
• Maintains correct routing and clearance to prevent chafing and wear
• Helps reduce vibration and rattling noises from unsecured lines
• Can help prevent drips or leaks when used to retain water tubing

• 1 clamp

• Unplug the refrigerator and, if working with water lines, shut off the water supply
• Note the original clamp orientation and routing; take a photo before removal
• Install the new clamp in the same location, securing lines without pinching or over-stressing them
• Restore power (and water if applicable) and check that lines are secure; inspect for leaks if used on water tubing

This freezer door gasket replaces a worn seal on the freezer door. It restores a tight, continuous seal to keep cold air in, help reduce frost and moisture, and support consistent freezer temperatures and proper door closure.

• Seals the perimeter of the freezer door to limit air leaks and moisture intrusion
• Helps reduce frost buildup and temperature swings in the freezer compartment
• Replaces torn, shrunken, or misshapen gaskets that cause gaps or poor door closure
• Common symptoms: visible cracks or tears, condensation around the door, persistent frost, or the door not sealing flush

• Disconnect power before servicing
• Remove the old gasket and clean the door's gasket channel thoroughly
• To ease installation and relax shipping folds, warm the new gasket with hot water; avoid excessive heat
• Seat corners first, then press evenly around the perimeter; close the door and confirm uniform contact

The Fresh Food Door Gasket is an OEM component specifically designed for GE refrigerators. It creates an airtight seal around the fresh food compartment door, helping to optimize energy efficiency and food freshness. 

The door gasket helps keep cold air in and outside moisture out, maintaining proper temperatures and humidity levels within the refrigerator. It also helps prevent odors from transferring between compartments. 

Symptoms of a bad door gasket include: 

• Increased energy costs from the refrigerator working harder to maintain temperatures
• Faster icing or frost buildup in the freezer
• Items drying out more quickly inside the fresh food compartment  
• Moisture or condensation present around door seals or on internal surfaces

Color: White

This OEM GE replacement part is guaranteed to provide a proper seal and restore effective insulation. It is also compatible with Hotpoint, RCA, and some Kenmore models.

This factory screw secures brackets, panels, and internal components so assemblies stay tight and aligned. Replace a missing or damaged fastener to eliminate rattles, looseness, and misaligned parts. What it does:

• Fastens components, panels, hinges, or brackets to the appliance frame
• Helps maintain proper alignment and a solid, rattle-free fit
• Replaces stripped, rusted, or missing hardware
• Can address vibration noises and loose assemblies

• Includes 1 screw

• Unplug the appliance and shut off water before servicing
• Wear gloves; sheet-metal edges can be sharp
• Start threads by hand to avoid cross-threading; use the appropriate driver
• Tighten snugly—do not overtighten to prevent stripping

This ice maker fill cup directs water from the refrigerator fill tube into the ice maker mold so each cycle fills correctly. Replacing a damaged cup restores consistent ice production and helps prevent water spills. What it does:

• Channels water from the fill tube into the ice maker mold for proper tray filling.
• Prevents water from dripping into the freezer compartment when intact.
• A cracked, warped, or missing fill cup can cause underfilled ice cubes, overflowing molds, or water pooling in the freezer.
• Compatible with common top/front-mounted household ice makers that use a separate plastic fill cup.

• Disconnect power and shut off the water supply before starting work.
• Remove the ice bin or ice maker assembly as needed to access the fill cup.
• The cup typically snaps or slides into place; use gentle pressure and avoid forcing plastic tabs.

This center hinge pin is the pivot shaft for the door at the middle hinge on select refrigerators. Replacing a worn or bent pin restores proper door alignment and smooth movement to help the door close and seal correctly.

• Serves as the door's pivot on the center hinge
• Maintains correct door height and alignment
• Helps the door open and close smoothly without binding
• Common symptoms: door sagging or rubbing, squeaking, wobbling, or not closing fully/popping open

• Unplug the refrigerator and remove items from the door to reduce weight
• Support the door before removing the center hinge bracket fasteners
• Install the new pin on the center hinge; reuse original spacers/bushings in their original order
• Reassemble, then check door alignment and gasket contact; adjust the hinge as needed per your model

This center hinge supports and pivots the refrigerator door at the middle of the cabinet. Replacing a bent or worn hinge restores smooth door movement and a reliable seal to help maintain proper temperatures.

• Supports door weight and provides the center pivot for opening and closing
• Helps maintain door alignment for even gasket contact
• Wear or damage can cause sagging, rubbing, squeaks, or doors that won't close/seal
• Visible bending, looseness, or a damaged hinge bracket/pin indicates replacement is needed

• Disconnect power and remove items from the door to reduce weight
• Support the door and have a second person assist; note the order of any spacers/washers
• Remove mounting screws, replace the hinge, and reinstall while keeping the door square
• Verify the door swings freely and the gasket seals evenly; adjust alignment as needed

This plug button is a small snap-in cap used on refrigerators to cover exposed holes on door handles, liners, or trim. It restores a clean, finished look while helping keep dust and moisture out of the cabinet.

• Snaps into a screw or access hole on a handle, liner, or trim panel
• Covers fasteners and gaps for a clean, finished appearance
• Helps block dirt and moisture from open holes
• Typical symptoms: missing cap, broken or loose plug, visible screw hole or cosmetic gap

• Unplug the appliance before servicing and use caution around sharp edges
• Align the plug with the hole and press straight in by hand until fully seated and flush
• For handle screw holes, tighten fasteners first, then install the cap
• Avoid using metal tools on finished surfaces to prevent scratches

The Vegetable Pan is an OEM replacement part for GE refrigerators, it is responsible for keeping produce fresh and organized. It is designed to maintain the ideal humidity and temperature levels needed to extend the shelf life of your fruits and vegetables. The clear design allows for easy visibility and accessibility, making it easy to locate and retrieve your produce.

A bad vegetable pan can occur due to damage or wear and tear over time. If you notice symptoms such as cracks, broken parts, or improper humidity control, it may indicate a need to replace the vegetable pan.

Symptoms of a bad vegetable pan include:

• Cracks or broken parts
• Improper humidity control
• Premature wilting or spoiling of produce

Restore your refrigerator's storage capabilities and keep your fruits and vegetables fresh for longer by replacing the faulty vegetable pan with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This top hinge and pin assembly supports the refrigerator door at the upper corner and provides the pivot point for smooth opening and closing. Replacing a worn hinge restores proper alignment and a consistent, reliable door seal.

• Supports door weight at the top and provides the pivot for smooth swing
• Maintains door alignment to prevent rubbing and uneven gaps
• Helps the door close securely for proper gasket contact
• Typical symptoms: door sags or scrapes, doesn't close flush, binds/clicks at the top, visible wobble

• Disconnect power and remove items from the door shelves
• Have a helper support the door; remove the top hinge cover and mounting screws, then lift the door straight up/off
• Position the new hinge, secure with the original hardware, and set the door back on the pins
• Adjust leveling if needed before restoring power

The Fresh Food Glass Shelf is an OEM part for GE refrigerators. It provides an adjustable glass shelf area inside the fresh food compartment for organizing food items in an open layout. The glass measures approximately 22 inches.

Causes of a bad shelf can include chips or cracks developing from repeated impact or stress from heavy loads over time. Improper cleaning leading to scratches or dulling of the glass surface is also possible.

Symptoms of a bad Fresh Food Glass Shelf  include: 

• Visible cracks or chips in the glass that compromise structural integrity
• Dull, scratched, or filmy glass that inhibits the visibility of food contents  
• Failure to slide smoothly or stay locked into position on shelf supports

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This small hardware clamp is used on select refrigerators to secure tubing or wiring to the cabinet or frame. Replaces a missing or damaged clamp to keep lines stable, reduce vibration, and help prevent rubbing or leaks.

• Secures small water tubing or electrical harnesses along the cabinet/frame
• Helps prevent vibration, rattling, and abrasion of lines
• Maintains correct routing to keep lines clear of moving or hot components
• Common clues: loose or noisy lines, chafing marks, or moisture near tubing connections

• Unplug the appliance and shut off the water supply before servicing
• Note the original location and routing; take a photo for reference
• Reuse the existing mounting screw/fastener if required; tighten only enough to hold without crushing tubing
• Restore power and water, then run and inspect for vibration and leaks