Gtw335asnww Parts

This white control panel is the exterior trim piece that houses the range/oven user interface and secures the control board and buttons. It restores the appliance's finished appearance and provides a stable mounting surface for the controls. What it does:

• Replaces cracked, warped, scratched or faded control panel trim to restore appearance
• Provides the mounting surface and bezel for the control board, keypad and buttons
• Helps eliminate loose or misaligned buttons and trim that can interfere with normal use
• Maintains proper alignment of the control assembly and protects underlying components

• One white control panel

• Disconnect power to the appliance before starting any work
• Basic hand tools are typically required; follow OEM service instructions for disassembly
• Handle carefully to avoid scratching the finish and to protect attached electronics

This control board shield protects the appliance's electronic control board from debris, heat, and accidental contact to help maintain reliable operation. It's a direct-fit replacement designed to restore proper protection for the control electronics. What it does:

• Covers and shields the electronic control board from dust, moisture splash, and physical contact
• Helps reduce risk of short circuits caused by loose debris or small objects
• Preserves board components from incidental heat exposure and wear
• Commonly replaced when the old shield is cracked, broken, or missing

• One control board shield

• Disconnect power before servicing to avoid shock or damage to electronics
• Handle shield and control board carefully to avoid bending tabs or damaging connectors
• Reuse original fasteners if undamaged; replace any broken clips or screws

This hex-head machine screw secures appliance panels and internal components where a 5/16-24 x 1 inch fastener is required. Durable replacement for stripped or missing screws to restore safe assembly and reduce vibration. What it does:

• Fastens panels, brackets, and assemblies with a 5/16-24 machine thread.
• Replaces worn, stripped, or missing screws that can cause rattling or loose parts.
• Provides a secure, threaded connection for metal-to-metal or tapped-hole repairs.
• Matches OEM thread and length to maintain proper fit and alignment.

• Disconnect power and unplug the appliance before servicing.
• Use the correct hex driver or socket to avoid rounding the head.
• Thread into matching 5/16-24 tapped holes; do not force into incorrect thread sizes.
• Tighten snugly but avoid over-torquing to prevent stripping the tapped hole.

This dual harness connector is a direct-fit replacement plug that secures two wire harnesses to restore a reliable electrical connection. It helps eliminate loose or intermittent wiring connections for affected appliance circuits. What it does:

• Provides a secure, snap-fit connection between two wire harnesses
• Restores continuity to circuits that show intermittent power, no power, or erratic operation
• Holds wiring in proper alignment to prevent accidental disconnection
• Used where a dual-wire plug mates to a control, switch, or component

• One dual harness connector

• Always disconnect power to the appliance before servicing
• Inspect wire ends and terminals for damage; replace or repair wiring if needed
• Use appropriate tools to seat the connector fully; do not force or bend terminals

This left backsplash support is the metal bracket that secures the range/oven backsplash and helps keep the control panel and rear trim stable. It restores proper alignment and reduces movement of the upper back assembly. What it does

• Provides structural support for the left side of the backsplash and control panel area
• Keeps the backsplash and rear trim aligned to prevent wobble or sagging
• Helps stop vibration or rattling coming from the upper rear of the appliance
• Replaces a bent, broken, or missing left support bracket

• One left backsplash support bracket

• Disconnect power to the appliance before starting any repair
• You may need to remove the range top, control panel, or rear access panel to access mounting screws
• Use basic hand tools; keep fasteners for reuse and note their original locations
• If you see additional damaged or missing fasteners or trim, replace them as needed for a secure fit

This 8-18 x 5/8 screw fastens appliance panels and components for a secure, vibration-resistant fit. Stainless construction resists corrosion for durable long-term holding in interior appliance assemblies. What it does:

• Secures control panels, brackets, trim, and other sheet-metal parts
• Designed for 8-18 threads to match mating threaded inserts or nuts
• Square-recess (TSQ) head accepts matching driver for positive engagement
• Replaces missing, stripped, or corroded mounting screws that cause rattle or loosened parts

• One 8-18 x 5/8 screw

• Use the correct square-head driver to avoid cam-out and head damage
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Disconnect power and follow all safety precautions before working on the appliance
• Keep spare screws on hand when removing panels to prevent loss

This rear control panel replaces the damaged or worn console panel that mounts behind the range/oven controls, restoring a secure mounting surface and proper protection for control wiring and components. Fits styles that use a rear-mounted control console. What it does

• Provides the mounting surface and enclosure for control switches, touchpads, and indicator lights.
• Protects internal wiring and control components from heat, debris, and accidental contact.
• Restores proper alignment for knobs, buttons, and display modules when the original panel is bent, cracked, or missing.
• Helps eliminate loose or vibrating controls and can resolve cosmetic damage to the console area.

• One rear control panel.

• Disconnect power to the appliance before starting any repair to avoid electrical shock.
• Removal typically requires taking off back access panels and disconnecting any attached control cables or grounding screws; keep hardware for reinstallation.
• Handle edges and sheet-metal openings with care; wear gloves and eye protection to avoid cuts.
• Note wiring locations and take photos before disconnecting for correct reassembly.

A molded metal support bracket that holds the right side of the oven/range backsplash assembly in place, restoring secure alignment and preventing sagging or gaps behind the control area. What it does

• Secures the right side of the backsplash or backguard assembly to the range frame.
• Helps prevent the backsplash from sagging, shifting, or coming loose when using controls or cleaning.
• Can stop visible gaps that allow debris or steam behind the control panel.
• Works with the existing backsplash components and mounting hardware to maintain proper fit.

• One right backsplash support bracket.

• Disconnect power to the appliance before attempting any service.
• Access may require removing the cooktop, control panel, or top trim.
• Use appropriate hand tools; keep track of fasteners and any clips removed.
• If the backsplash or adjacent parts are damaged, inspect related fasteners and supports for wear before reassembly.