Gtw460asjoww Parts

This control board shield protects the appliance's electronic control board from debris, heat, and accidental contact to help maintain reliable operation. It's a direct-fit replacement designed to restore proper protection for the control electronics. What it does:

• Covers and shields the electronic control board from dust, moisture splash, and physical contact
• Helps reduce risk of short circuits caused by loose debris or small objects
• Preserves board components from incidental heat exposure and wear
• Commonly replaced when the old shield is cracked, broken, or missing

• One control board shield

• Disconnect power before servicing to avoid shock or damage to electronics
• Handle shield and control board carefully to avoid bending tabs or damaging connectors
• Reuse original fasteners if undamaged; replace any broken clips or screws

This hex-head machine screw secures appliance panels and internal components where a 5/16-24 x 1 inch fastener is required. Durable replacement for stripped or missing screws to restore safe assembly and reduce vibration. What it does:

• Fastens panels, brackets, and assemblies with a 5/16-24 machine thread.
• Replaces worn, stripped, or missing screws that can cause rattling or loose parts.
• Provides a secure, threaded connection for metal-to-metal or tapped-hole repairs.
• Matches OEM thread and length to maintain proper fit and alignment.

• Disconnect power and unplug the appliance before servicing.
• Use the correct hex driver or socket to avoid rounding the head.
• Thread into matching 5/16-24 tapped holes; do not force into incorrect thread sizes.
• Tighten snugly but avoid over-torquing to prevent stripping the tapped hole.

This decorative badge is the exterior emblem that mounts to the appliance cabinet or door to restore factory appearance and identification. It replaces a missing, faded, cracked, or detached emblem for a clean, finished look. What it does:

• Replaces a worn, damaged, or missing appliance emblem
• Restores original exterior appearance and branding visual
• Prevents loose badges from catching on clothing or edges
• Designed to match OEM fit and finish for a seamless look

• Typically installs on the appliance front using clips or adhesive
• Clean and dry the mounting surface before installing to ensure proper adhesion or fit
• Avoid excessive force when seating the badge to prevent damaging trim or clips
• Wear gloves to protect finish and follow general appliance-safety practices

This thermistor clip secures a refrigerator/freezer temperature sensor in the correct position so the control can read accurate temperatures and keep the appliance cycling properly. Simple replacement of a damaged clip restores proper sensor placement. What it does:

• Holds the refrigerator thermistor/sensor against the evaporator tube or cabinet to ensure stable temperature readings
• Prevents the sensor from shifting or falling away, which can cause incorrect temperature control or erratic cooling
• Keeps wiring routed and protected from contact with moving or hot components
• Small, durable clip designed for a snug fit without damaging the sensor

• Disconnect power before servicing to reduce risk of shock or injury
• Handle the thermistor sensor carefully; avoid kinking or pulling the sensor leads
• Clip the sensor gently into place so it contacts the evaporator tube or designated mounting point without crushing the sensor
• After installation, restore power and verify proper temperature control and normal compressor/defrost cycles

This dual harness connector is a direct-fit replacement plug that secures two wire harnesses to restore a reliable electrical connection. It helps eliminate loose or intermittent wiring connections for affected appliance circuits. What it does:

• Provides a secure, snap-fit connection between two wire harnesses
• Restores continuity to circuits that show intermittent power, no power, or erratic operation
• Holds wiring in proper alignment to prevent accidental disconnection
• Used where a dual-wire plug mates to a control, switch, or component

• One dual harness connector

• Always disconnect power to the appliance before servicing
• Inspect wire ends and terminals for damage; replace or repair wiring if needed
• Use appropriate tools to seat the connector fully; do not force or bend terminals

This left backsplash support is the metal bracket that secures the range/oven backsplash and helps keep the control panel and rear trim stable. It restores proper alignment and reduces movement of the upper back assembly. What it does

• Provides structural support for the left side of the backsplash and control panel area
• Keeps the backsplash and rear trim aligned to prevent wobble or sagging
• Helps stop vibration or rattling coming from the upper rear of the appliance
• Replaces a bent, broken, or missing left support bracket

• One left backsplash support bracket

• Disconnect power to the appliance before starting any repair
• You may need to remove the range top, control panel, or rear access panel to access mounting screws
• Use basic hand tools; keep fasteners for reuse and note their original locations
• If you see additional damaged or missing fasteners or trim, replace them as needed for a secure fit

This control panel is the user interface assembly for the 460/465 series, restoring visible controls and button response so you can operate the appliance safely and reliably. Fits into the front console to replace a cracked or non-responsive panel. What it does:

• Houses the touchpads/buttons and display area used to select cycles and settings
• Replaces worn, cracked, or unresponsive control surfaces to restore normal operation
• Helps resolve issues like unresponsive buttons, missing labels, or cosmetic damage
• Works with the console electronics to transmit user inputs for cycle selection

• Disconnect power to the appliance before starting any work to avoid shock or injury
• Installation typically requires removing the console trim; handle the panel carefully to avoid scratching or damaging the display
• If the control panel is attached to electronic modules, avoid contact with circuit boards and static-sensitive components
• Verify function after reassembly; if problems persist, check related electronic modules or wiring

This 8-18 x 5/8 screw fastens appliance panels and components for a secure, vibration-resistant fit. Stainless construction resists corrosion for durable long-term holding in interior appliance assemblies. What it does:

• Secures control panels, brackets, trim, and other sheet-metal parts
• Designed for 8-18 threads to match mating threaded inserts or nuts
• Square-recess (TSQ) head accepts matching driver for positive engagement
• Replaces missing, stripped, or corroded mounting screws that cause rattle or loosened parts

• One 8-18 x 5/8 screw

• Use the correct square-head driver to avoid cam-out and head damage
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Disconnect power and follow all safety precautions before working on the appliance
• Keep spare screws on hand when removing panels to prevent loss

This rear control panel replaces the damaged or worn console panel that mounts behind the range/oven controls, restoring a secure mounting surface and proper protection for control wiring and components. Fits styles that use a rear-mounted control console. What it does

• Provides the mounting surface and enclosure for control switches, touchpads, and indicator lights.
• Protects internal wiring and control components from heat, debris, and accidental contact.
• Restores proper alignment for knobs, buttons, and display modules when the original panel is bent, cracked, or missing.
• Helps eliminate loose or vibrating controls and can resolve cosmetic damage to the console area.

• One rear control panel.

• Disconnect power to the appliance before starting any repair to avoid electrical shock.
• Removal typically requires taking off back access panels and disconnecting any attached control cables or grounding screws; keep hardware for reinstallation.
• Handle edges and sheet-metal openings with care; wear gloves and eye protection to avoid cuts.
• Note wiring locations and take photos before disconnecting for correct reassembly.