Gtw680bsjws Parts

This dual harness connector is a direct-fit replacement plug that secures two wire harnesses to restore a reliable electrical connection. It helps eliminate loose or intermittent wiring connections for affected appliance circuits. What it does:

• Provides a secure, snap-fit connection between two wire harnesses
• Restores continuity to circuits that show intermittent power, no power, or erratic operation
• Holds wiring in proper alignment to prevent accidental disconnection
• Used where a dual-wire plug mates to a control, switch, or component

• One dual harness connector

• Always disconnect power to the appliance before servicing
• Inspect wire ends and terminals for damage; replace or repair wiring if needed
• Use appropriate tools to seat the connector fully; do not force or bend terminals

This jumper harness is an OEM-style electrical connector harness that restores reliable connector-to-connector wiring between components. It replaces a worn or damaged harness to help re-establish proper electrical connections and operation. What it does:

• Links two or more electrical connectors to complete a circuit between controls and components.
• Replaces damaged, frayed, or corroded wires that can cause intermittent operation or loss of power.
• Commonly used when console, control board, or component-to-component connections fail or show error symptoms.
• Helps eliminate open circuits and poor connections that trigger faults or prevent operation.

• One jumper harness as shown

• Disconnect power to the appliance before servicing to avoid shock or injury.
• Match connector shapes and wire colors before connecting; do not force connectors together.
• Route and secure the harness away from moving parts and heat sources; use existing clips or ties.

This pressure hose routes air/water pressure to the washer's water-level/pressure switch so the machine can detect and control fill level. It restores reliable level sensing for proper fill and cycle operation. What it does:

• Connects the tub/cavity to the washer pressure/water-level switch to transmit pressure changes.
• Helps the control detect correct water level so cycles fill, drain and advance properly.
• Commonly used when a damaged or leaking hose causes incorrect fill behavior or error codes.
• Flexible design resists kinks that can prevent accurate pressure sensing.

• One replacement pressure hose.

• Disconnect power and water supply before starting any repair.
• Inspect fittings for secure, leak-free connections and replace clamps if needed.
• Route the hose without sharp bends or pinches; secure to prevent chafing.

A single replacement screw used to secure the lid hinge on top-load washers. Replaces a worn or missing hinge fastener so the lid stays aligned and operates smoothly. What it does

• Secures the lid hinge assembly to the washer cabinet or lid
• Restores proper lid alignment and reduces wobble or sagging
• Helps stop the lid from shifting, binding, or making noise when opened/closed
• Used when original screw is missing, stripped, or damaged

• One lid hinge screw

• Disconnect power and water supply before working on the washer
• Support the lid and hinge assembly while removing and installing the screw to prevent injury or damage
• Use the correct screwdriver or bit to avoid stripping the screw head

This snap-in lid beauty plug restores the finished look of the washer lid and covers exposed screw holes for a cleaner appearance. It helps keep dirt and moisture out of the hinge/screw area while smoothing rough edges. What it does:

• Covers exposed holes or damaged trim on the washer lid to improve appearance.
• Helps block dirt and moisture from reaching screw heads and hinge openings.
• Prevents rough edges from catching clothing or skin.
• Useful when the original plug is missing, cracked, or worn.

• One lid beauty plug (snap-in cover).

• High-level DIY: usually presses into place—no special tools required.
• Always disconnect power to the appliance before working on or near electrical components.
• Avoid forcing the plug; align and press evenly to prevent breakage.
• If mounting area is damaged, replacement of surrounding trim may be required for a secure fit.

This left backsplash support secures the left side of a range or stove backsplash, keeping the backsplash aligned and stable for safe, reliable operation. It replaces a bent or broken support to restore proper fit and appearance. What it does:

• Holds and supports the left edge of the backsplash to prevent sagging or separation
• Restores proper alignment so control panels and trim sit flush
• Helps stop rattling or vibration caused by a damaged support
• Commonly replaced when the support is bent, cracked, or missing

• Install with the appliance unplugged and controls off; disconnect power at the breaker for electric ranges.
• Depending on model, you may need to remove the backsplash trim or rear panel to access mounting points.
• Use correct-size fasteners and verify secure attachment; avoid overtightening to prevent cracking.

This right-side backsplash support secures the range's backsplash to the cooktop, restoring proper alignment and stability so the backguard sits firmly and reduces wobble or gaps. Designed to fit the OEM mounting points. What it does

• Holds the right side of the backsplash in place so the backguard stays aligned with the cooktop
• Prevents the backsplash from leaning, rattling, or separating from the range
• Restores proper mounting after impact, wear, or missing/broken fasteners
• Works with the range's existing screws and mounting brackets to re-establish a solid fit

• One right-side backsplash support

• Disconnect power to the appliance before starting any repair
• Remove the backguard or access panel per manufacturer instructions to reach mounting area
• Use basic hand tools (screwdriver/socket) to remove and replace fasteners; keep original screws if reusable
• Watch for sharp sheet-metal edges and wear safety gloves and eye protection

This single harness connector joins two sections of an appliance wiring harness to restore a secure electrical connection and reliable operation. It's a simple replacement for a damaged or corroded connector to help eliminate intermittent power or control issues. What it does:

• Provides a secure plug-style connection between two harness wires
• Restores reliable electrical contact when an original connector is cracked, melted, or corroded
• Helps stop intermittent operation, loss of power to components, or control malfunctions caused by a faulty connector
• Maintains correct wire alignment and strain relief in the harness

• One single harness connector

• Disconnect power to the appliance before inspecting or replacing wiring components
• Verify wire placement and secure locking tab before restoring power
• Replace only the damaged connector and inspect adjacent wiring for heat or damage