Gtw81essjws Parts

Secures your washer's drain hose to the standpipe or laundry tub. Replace if cracked, broken, or missing to keep hose positioned and prevent dislodging.

Power line filter sits between household AC and washer's internal wiring. Replace when cracked, corroded, or causing breaker trips due to electrical noise.

8-18 x 9/16-inch hex washer head screw secures panels, brackets, and trim in appliances. Replace missing, damaged, or stripped screws for proper fit.

This upper ball socket is the pivot socket that supports a dryer suspension rod, helping the drum stay aligned and rotate smoothly. Replaces a worn or broken socket to reduce noise, wobble, or uneven drum movement. What it does:

• Provides a secure pivot point for the dryer's suspension rod or support shaft
• Keeps the drum centered and helps maintain smooth rotation
• Worn or cracked sockets can cause noise, rubbing, or drum misalignment
• Works with the matching lower socket and suspension components to stabilize the drum

• Disconnect power and gas before starting any repair
• Use basic hand tools; remove the front panel or bulkhead to access the suspension rod as needed
• Inspect suspension rod and lower socket; replace any worn mating parts to ensure proper function

Leaking water valve connection? This flat washer creates a watertight seal between the valve and hose or fitting. Simple DIY fix for water leaks.

Replacement logo badge emblem for appliance exterior panels. Restores original appearance when emblem is missing, faded, cracked, or damaged. 1 piece.

Washer won't start, stops mid-cycle, or buttons unresponsive? This main control board manages cycle selection and timed functions, restoring normal operation.

This replacement screw secures appliance components using a 5/16-24 Sinuloc style thread for a vibration-resistant hold. Use it to restore proper fastening and reduce rattling or loose panels caused by worn or missing hardware. What it does:

• Fastens panels, brackets, or assemblies with a 5/16-24 threaded connection
• Sinuloc design helps resist backing out from vibration or thermal cycling
• Restores secure mounting when original screw is stripped, lost, or damaged
• Helps eliminate rattles and movement of attached parts

• Verify correct thread size and engaging part before installation
• Start threads by hand to avoid cross-threading; tighten until secure
• Do not overtighten—use appropriate driver and moderate torque
• Disconnect power and follow appliance-specific safety procedures before servicing

A 1/4-20 hex head cap bolt used to secure assemblies and components in compatible appliances. Provides a durable, easy-to-grip head for tightening with a wrench or socket and helps maintain proper alignment. What it does:

• Fastens panels, brackets, and components where a 1/4-20 hex head bolt is required
• Restores secure mounting when a damaged or missing bolt causes loose or rattling parts
• Helps prevent misalignment or movement of assemblies during operation
• Works with standard 1/4-20 threaded holes and mating nuts

• Use the correct socket or wrench size to avoid rounding the hex head
• Tighten to the appliance manufacturer's recommended torque when available; avoid over-tightening
• Replace damaged or corroded bolts with identical thread size and length for safe operation
• Disconnect power and follow appliance safety procedures before servicing

This standpipe bracket secures the appliance's drain standpipe or hose assembly, keeping the drain connection stable for reliable water flow and reducing strain that can cause leaks or disconnections. What it does:

• Holds the drain standpipe or drain hose in the correct position to maintain uninterrupted drainage
• Prevents the standpipe/hose from shifting, kinking, or pulling loose during cycles
• Helps reduce leaks and water spills caused by a loose or misaligned drain connection
• Supports proper appliance drainage which can prevent backup or slow-drain symptoms

• Disconnect power and shut off the water supply before starting work
• Remove the required access panels to reach the drain standpipe area
• Secure the bracket per OEM guidance; use appropriate fasteners and avoid overtightening

This harness cover is a replacement protective housing that shields the appliance's wiring and connectors from abrasion and incidental contact, helping preserve safe, reliable electrical connections. What it does:

• Covers and protects the wire harness and connector area from rubbing, pinching, and incidental contact
• Helps prevent insulation damage that can lead to exposed wires or arcing
• Common signs a cover is needed: visible frayed or melted insulation, exposed wires, or intermittent power/connectivity to components
• Conserves the routing of wires to reduce snagging during panel removal or maintenance

• Disconnect all power (unplug appliance or shut off breaker) before servicing to avoid shock or damage
• Access may require removal of the appliance back or access panel; keep fasteners organized for reassembly
• Position cover over the harness and secure to the mounting points; do not force or crimp wiring when re-routing
• If wiring or connectors show damage, replace the wiring harness rather than reusing damaged components

This O-ring thermistor is a sealed temperature sensor that restores accurate temperature sensing in refrigeration circuits. It helps the control board read temperatures so the appliance can maintain proper cooling and defrost cycles. What it does:

• Senses temperature at the evaporator/area it's installed in so the control can regulate cooling
• Helps prevent overcooling or undercooling when operating correctly
• Can cause temperature-related error codes or improper defrosting when faulty
• Common symptom of failure: inconsistent temperatures or an error indicating a bad thermistor

• Disconnect power to the appliance before servicing to avoid shock or damage
• Replace with the exact part number to ensure fit and proper operation
• Handle the sensor and O-ring carefully to avoid damaging the lead or seal
• Test continuity/ resistance per the service manual

Fix a washer that won't start or shows lid lock errors with this lid lock bezel. Restores proper lid locking function. Moderate DIY repair.

Secures washer hoses to prevent leaks. Replace if damaged, corroded, or causing water leakage during wash cycles. Verify fit with your model number.

If your washer lid won't latch or lock properly, this clip secures the lid lock assembly to restore safe operation. Simple snap-in installation.

Illuminates your washer tub for easy loading and unloading. Replace when light is dim, cracked, or not working. Verify fit with your model number.