Gtws3000mows Parts

Connects the door to the hinge for smooth pivoting and proper alignment. Replace if door movement is loose or seal is compromised. Verify fit with model.

Size: 8 - 18 ab.

A flat washer used at the water valve connection to create a reliable seal and help prevent leaks. Small, simple replacement that restores a tight water inlet connection and reduces drip or seepage around the valve. What it does:

• Seats between the water valve fitting and hose or tube to form a watertight seal
• Helps stop leaks or slow drips originating at the valve connection
• Stabilizes the connection to reduce movement-related wear
• Common symptom: visible leaking or dripping at the valve or hose connection

• Turn off water supply and unplug the appliance before servicing
• Remove the hose or fitting, replace the old washer, and reseat the connection
• Hand-tighten fittings, then snug slightly with a wrench—avoid over-tightening
• Inspect valve/gasket surfaces for debris or damage and replace if worn

Replacement clip retainer for washers. Secures interior panels and components to prevent rattling or loose trim. Installs to restore proper fit.

Fix a washer that won't spin or agitate with a new stator. This motor component creates the magnetic field needed to drive the wash basket during cycles.

This 8-18 x 3/4 machine screw fastens appliance panels and small brackets to keep components secure and stable. It's a direct-fit replacement screw used where the original hardware has stripped, broken, or gone missing. What it does:

• Secures access panels, mounting brackets, and small assemblies
• Restores proper alignment and reduces rattling or vibration
• Replaces stripped or damaged fasteners
• Keeps wiring and components held in place for safe operation

• Unplug the appliance or disconnect power before starting work
• Use the correct driver and size to avoid stripping the head
• Do not overtighten; snug until secure to prevent damage to parts
• Replace corroded or damaged fasteners for best results

The Spring is an OEM part for GE front-loading washing machines. It is responsible for assisting with the opening and closing of the washer door during the loading and unloading of clothes.

Causes of a bad spring can include cracks or fractures from repeated flexing over thousands of cycles. Stress and damage from excessively heavy loads or forced/slammed door movements can hasten spring failure.

Symptoms of a failed spring include:

• The door being hard to open/close or moving too freely
• An inability to hold the door securely closed
• Unnecessary noise and vibration from the door

Replace the worn spring with this genuine GE OEM part to restore proper function and balance to the door. It is designed for precise performance and durability. This replacement is also compatible with some Kenmore machines using GE components.

The Wire Tie is an OEM part for GE dryers. It is used to secure and organize internal wiring, ensuring that wires remain properly positioned and do not interfere with the operation of the dryer. This part plays an important role in preventing wires from becoming tangled, pinched, or damaged during the dryer’s cycles.

Over time, the wire tie can become worn out, broken, or damaged due to prolonged exposure to heat, vibrations, or wear from normal use. A compromised wire tie can lead to loose or unsecured wiring, which may impact the performance of the dryer or cause electrical issues.

Symptoms of a bad Dryer Wire Tie include:

• Loose or unsecured internal wiring
• Interference with dryer components during operation
• Electrical malfunctions or short circuits
• Wires appearing frayed or damaged due to improper support

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Push nut fastener for washer assembly. Secures components and panels in place. Replace if missing, damaged, or no longer holding parts securely.

Replacement foot and base assembly for your washer. Installs at the bottom to provide stable leveling support. Needed when original is cracked or broken.

This front support leg provides stable, level support for the appliance's front end to reduce rocking and maintain proper alignment. It restores correct height and helps doors/drawers close properly. What it does:

• Replaces a worn or damaged front support leg to stop rocking or leaning
• Restores even contact with the floor for safer operation and reduced vibration
• Helps correct door or drawer alignment caused by a sagging front
• Works as a direct-fit replacement when the original front leg is broken or missing

• One front support leg

• Disconnect power and water before starting any repair
• Support the appliance securely or tip it per the manufacturer's service instructions
• Remove any trim or brackets needed to access the front leg; use hand tools as required
• Re-check level and stability after installation; test operation before regular use

Fix a washer that won't start or stops mid-cycle with this lid lock bezel. Replaces cracked trim that prevents proper lid detection. Simple snap-in repair.

Secures your washer's drain hose to the standpipe or laundry tub. Replace if cracked, broken, or missing to keep hose positioned and prevent dislodging.

Power line filter sits between household AC and washer's internal wiring. Replace when cracked, corroded, or causing breaker trips due to electrical noise.

If your washer won't start or shows an error code during spin, the lid lock assembly may be faulty. This kit restores secure latching for safe operation.