Gtws3000mows Parts

This front support leg provides stable, level support for the appliance's front end to reduce rocking and maintain proper alignment. It restores correct height and helps doors/drawers close properly. What it does:

• Replaces a worn or damaged front support leg to stop rocking or leaning
• Restores even contact with the floor for safer operation and reduced vibration
• Helps correct door or drawer alignment caused by a sagging front
• Works as a direct-fit replacement when the original front leg is broken or missing

• One front support leg

• Disconnect power and water before starting any repair
• Support the appliance securely or tip it per the manufacturer's service instructions
• Remove any trim or brackets needed to access the front leg; use hand tools as required
• Re-check level and stability after installation; test operation before regular use

This upper ball socket is the pivot socket that supports a dryer suspension rod, helping the drum stay aligned and rotate smoothly. Replaces a worn or broken socket to reduce noise, wobble, or uneven drum movement. What it does:

• Provides a secure pivot point for the dryer's suspension rod or support shaft
• Keeps the drum centered and helps maintain smooth rotation
• Worn or cracked sockets can cause noise, rubbing, or drum misalignment
• Works with the matching lower socket and suspension components to stabilize the drum

• Disconnect power and gas before starting any repair
• Use basic hand tools; remove the front panel or bulkhead to access the suspension rod as needed
• Inspect suspension rod and lower socket; replace any worn mating parts to ensure proper function

The Backsplash Body Assembly is an OEM part for GE washers. It is the rear interior panel and barrier of the washer tub. The sturdy plastic construction of the backsplash body helps protect internal components from damage while also containing water within the tub.

Symptoms of a bad backsplash body assembly include: 

• Cracks, breaks, or holes forming in the plastic material
• Water leaks occurring behind or around the assembly
• Looseness or movement of the backsplash panel

Causes can be normal wear and tear over time, mineral or chemical damage weakening the plastic, or physical impacts from loaded laundry items.

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models
 

This replacement badge is the small logo emblem that mounts to the appliance exterior to restore original appearance and branding. It provides a clean, professional look when the original emblem is missing, faded, or damaged. What it does:

• Replaces a missing, cracked, or faded exterior logo emblem
• Restores factory appearance on doors, panels, or control bezels
• Helps identify the appliance and maintain resale value
• Cosmetic-only part; does not affect appliance operation

• Surface-mount installation; may use adhesive or snap-fit depending on model—inspect original attachment method before installing
• Clean and dry mounting surface thoroughly for best adhesion
• Handle carefully to avoid scratching finished surfaces

This flat washer seals the water valve connection to help prevent leaks and ensure a reliable water supply. It's a simple replacement that restores a watertight seal where the valve meets the hose or fitting. What it does

• Creates a flat, compressible seal at the water valve connection to stop drips and leaks.
• Replaces a worn or flattened washer that can cause slow leaks or pooling under the appliance.
• Helps maintain proper water flow by ensuring a tight, leak-free joint.
• Useful when replacing or servicing the inlet valve or supply fittings.

• Turn off water supply and unplug the appliance before replacing the washer.
• Inspect mating surfaces and the valve seat; clean debris before installing the new washer.
• Seat the washer flat against the connection and tighten fittings by hand, then snug with a wrench—avoid overtightening.
• If leaks persist after replacement, recheck seating and replace damaged fittings or seals as needed.

This mode shifter assembly moves the transmission/gear selector to change wash cycles so your washer can select the correct agitation and spin functions. Replacing a worn shifter restores reliable cycle selection and operation. What it does

• Moves the transmission/gear or cam to select wash, rinse, or spin modes during a cycle
• Ensures the control's selected cycle is mechanically engaged with the transmission
• Common symptom: washer won't advance or gets stuck between cycles
• Common symptom: noisy or inconsistent shifting during cycle changes

• One mode shifter assembly

• Disconnect power (and water if applicable) before beginning service
• Access may require removing the console or top panel; keep fasteners organized
• Inspect surrounding clips and linkage for wear; replace if damaged

This bulk replacement hose provides a plain-language replacement for damaged or worn appliance hoses. Use it to restore a secure water connection and stop leaks or restricted flow where the original hose is failing. What it does

• Carries water between components to maintain normal flow
• Replaces cracked, split, or brittle hose sections that can leak
• Helps resolve symptoms like visible leaks, reduced water flow, or pooling near the hose
• Designed for cutting and fitting when a specific hose length is required

• One bulk hose (cut-to-length)

• Cut to the exact length required and secure ends with appropriate clamps or fittings
• Inspect mating fittings and clamps for wear; replace if damaged
• Turn off power and water supply before installation and test connections for leaks after restoring service

This electronic control board with pre-loaded firmware manages a refrigerator's operational functions and user interface, restoring reliable cycle control and status reporting when the original control fails. What it does:

• Replaces the main control that runs compressor, defrost, fans and other timed cycles
• Restores firmware-based logic for temperature management and user commands
• Can resolve symptoms such as unresponsive touch controls, incorrect cycle behavior, or error codes related to the main control
• Works with the appliance's existing wiring harness and sensors to re-establish normal operation

• One control and firmware assembly

• Disconnect power before servicing to avoid shock or damage
• Handle the control board by its edges and avoid static discharge; use an anti-static wrist strap if available
• Verify wire connections and harness seating during installation; do not force connectors
• If the appliance requires module programming or pairing, follow the manufacturer's service instructions

This flexible dispenser hose carries water from the refrigerator supply to the door dispenser and ice/water valve, restoring reliable water flow for dispensing and ice-making. Replaces a cracked, kinked, or leaking dispenser line. What it does:

• Delivers water from the household inlet to the dispenser/valve for normal dispensing and ice operations
• Prevents leaks and maintains proper water pressure when intact
• Stops water leaks caused by cracks, splits or worn tubing
• Helps eliminate intermittent or no-water symptoms at the dispenser

• Turn off water supply and unplug the appliance before replacing the hose.
• Inspect fittings and seals; replace any damaged clamps or gaskets for a secure connection.
• Route the hose to avoid sharp bends or pinching that can restrict flow or cause wear.

This replacement screw secures appliance components using a 5/16-24 Sinuloc style thread for a vibration-resistant hold. Use it to restore proper fastening and reduce rattling or loose panels caused by worn or missing hardware. What it does:

• Fastens panels, brackets, or assemblies with a 5/16-24 threaded connection
• Sinuloc design helps resist backing out from vibration or thermal cycling
• Restores secure mounting when original screw is stripped, lost, or damaged
• Helps eliminate rattles and movement of attached parts

• Verify correct thread size and engaging part before installation
• Start threads by hand to avoid cross-threading; tighten until secure
• Do not overtighten—use appropriate driver and moderate torque
• Disconnect power and follow appliance-specific safety procedures before servicing

This standpipe bracket secures the appliance's drain standpipe or hose assembly, keeping the drain connection stable for reliable water flow and reducing strain that can cause leaks or disconnections. What it does:

• Holds the drain standpipe or drain hose in the correct position to maintain uninterrupted drainage
• Prevents the standpipe/hose from shifting, kinking, or pulling loose during cycles
• Helps reduce leaks and water spills caused by a loose or misaligned drain connection
• Supports proper appliance drainage which can prevent backup or slow-drain symptoms

• Disconnect power and shut off the water supply before starting work
• Remove the required access panels to reach the drain standpipe area
• Secure the bracket per OEM guidance; use appropriate fasteners and avoid overtightening

This harness cover is a replacement protective housing that shields the appliance's wiring and connectors from abrasion and incidental contact, helping preserve safe, reliable electrical connections. What it does:

• Covers and protects the wire harness and connector area from rubbing, pinching, and incidental contact
• Helps prevent insulation damage that can lead to exposed wires or arcing
• Common signs a cover is needed: visible frayed or melted insulation, exposed wires, or intermittent power/connectivity to components
• Conserves the routing of wires to reduce snagging during panel removal or maintenance

• Disconnect all power (unplug appliance or shut off breaker) before servicing to avoid shock or damage
• Access may require removal of the appliance back or access panel; keep fasteners organized for reassembly
• Position cover over the harness and secure to the mounting points; do not force or crimp wiring when re-routing
• If wiring or connectors show damage, replace the wiring harness rather than reusing damaged components