Gud27gssmww Parts

Fix fabric softener leaks and splashing with this dispenser cap funnel. Replaces cracked or missing caps to restore proper dispensing during rinse cycles.

This cup funnel sits inside the fabric softener dispenser and channels softener into the wash basket during the rinse. Replacing a damaged or missing funnel helps stop leaks and ensures the softener empties as designed.

• Directs fabric softener from the dispenser cup into the washer tub during the rinse cycle
• Helps prevent spills and residue around the dispenser area
• Restores proper flow through the softener cup for consistent dispensing
• Common signs of failure: softener remains in the cup, slow or no dispensing, overflow/leaks, or a cracked/missing funnel

• Disconnect power and turn off water supply before servicing
• Remove the fabric softener dispenser cap/cup per your model's instructions
• Lift out the old funnel; clean the seat, then fully press the new funnel into place, aligning any tabs
• Reinstall the dispenser components and run a rinse cycle to flow

Fix no water fill or slow filling in your laundry center with this water inlet valve assembly. Controls water flow to washer tub and dispenser.

This spring cover protects and retains a mechanism spring inside your washer. Replacing a cracked or missing cover helps keep the spring seated, limits debris intrusion, and supports smooth, reliable movement of the associated control, latch, or linkage.

• Shields the spring and helps keep it properly seated in its pocket
• Reduces friction and wear that can lead to premature spring failure
• Supports consistent return action for the related control, latch, or lever
• Typical symptoms include a missing/broken cover, exposed spring, rattling, or erratic operation

• Unplug the appliance and turn off water before servicing
• Access point varies by model; photograph spring/cover orientation before removal
• Control the spring during disassembly to prevent sudden release
• Ensure the cover is fully seated; test operation before final reassembly

This safety thermostat is a temperature-sensitive cutoff for gas dryers. It monitors heat at the burner housing and opens the circuit if temperatures rise too high, helping protect the appliance and restore safe, reliable heating performance.

• Monitors burner/heater housing temperature to prevent overheating
• Opens the heat circuit when an over-temperature condition occurs
• Common symptoms: no heat, burner won't ignite or stay lit, heat shuts off too soon, long dry times
• Overheating or failure is often caused by restricted airflow; check venting and lint buildup

• Disconnect power and shut off gas supply before servicing
• Access the thermostat on the burner/heater housing; transfer wires one at a time and mount flush using the original hardware
• Do not overtighten; ensure firm metal-to-metal contact for accurate sensing
• After repair, clear lint and verify strong airflow at the exterior vent to prevent repeat issues

Adjustable leveling leg that threads into the base of your laundry center. Replace if broken, cracked, or missing to keep the unit stable and level.

This valve & burner assembly controls gas flow and directs flame to the burner for reliable ignition and consistent cooking. Replacing a faulty assembly restores proper burner operation and can resolve weak or no-flame issues. What it does:

• Regulates gas flow to the burner for controlled flame output and cooking performance.
• Routes flame through the burner tube to produce even heat across the cooking surface.
• Works with the ignition system to light the burner; common symptoms include burner not lighting, weak/uneven flame, or burner shutting off unexpectedly.

• Turn off gas supply and electrical power before servicing; follow local codes.
• Installation requires disconnecting gas lines and removing cooktop/oven components.
• After installation, check all connections for leaks and verify proper ignition before regular use.
• Do not use the appliance if you detect a gas odor; shut off gas and ventilate area.

Secures the drive motor to its mounting bracket. Replace if cracked, broken, or missing to keep the motor and blower aligned and stable during operation.

Washer won't drain or fills incorrectly? This pump and pressure hose harness connects the drain pump to the water level sensor for proper operation.

This is the top lid for a washer or laundry center unit. It covers the wash drum and engages the lid switch to allow the machine to operate. Replace this part if the lid is cracked, warped, or broken, which can prevent the washer from starting or completing its cycle.

Size: 8-32 t. Includes 12 screws.

This is the complete door assembly for a dryer, including the outer panel, inner panel, and handle. It seals the dryer drum compartment to contain heat and tumbling clothes during a drying cycle. Replace this assembly if the door is cracked, warped, won't latch properly, or if the window or seal is damaged.

This is a self-tapping sheet metal screw (8-18) used to secure internal components within the dryer. It threads into metal panels or brackets to hold parts firmly in place during operation. Replace if the screw is stripped, missing, or corroded, which can cause loose panels, rattling noises, or components shifting out of position.

Replacement clip cover that snaps over mounting clips to conceal hardware on your washer dryer combo. Restores finished appearance when original is cracked or missing.

Secures the drain hose in place to prevent kinks, rubbing, and leaks. Replace if hose sags or moves during cycles. Verify fit with your model number.

This SCR (silicon controlled rectifier) is a replacement power-control semiconductor used in appliance circuits to switch and regulate current. It restores proper control of heater/motor circuits when the original SCR fails. What it does:

• Controls current flow in high-power appliance circuits for timed heating or motor control.
• Replaces a failed SCR that causes intermittent or no power to the controlled component.
• Common symptom: appliance elements or motors do not turn on or cycle correctly.
• Common symptom: visible burn, cracking, or open circuit at the SCR.

• Disconnect power to the appliance before accessing electrical components to avoid shock.
• Handle the SCR carefully to avoid static or mechanical damage; use original mounting and hardware.