Gud27gssmww Parts

This communication harness provides an RJ45 connection between appliance control modules to enable board-to-board data signals and diagnostics. It restores proper communication so control boards can exchange status and commands. What it does:

• Carries digital communication signals between control boards using an RJ45-style connector
• Helps resolve issues where control modules fail to communicate or show communication errors
• Used when damaged, corroded, or broken connector wires cause intermittent or no signal
• Maintains correct pin alignment for reliable data transfer

• Disconnect power to the appliance before starting any work to avoid electrical shock
• Handle connectors by the housing; avoid pulling on wires to prevent damage
• Route the harness away from sharp edges, heat sources, and moving parts to prevent wear

This control support is the mounting bracket that secures the appliance control assembly, keeping the control panel stable and aligned for reliable operation. Replaces a worn or broken support to restore proper panel fit and reduce vibration. What it does:

• Holds the control board/panel in place to prevent sagging or misalignment
• Keeps control knobs and buttons properly positioned for accurate use
• Reduces vibration and rattling that can affect button/knob response
• Can prevent intermittent contact caused by a loose or damaged support

• One control support bracket

• Disconnect power (unplug the appliance or shut off the breaker) before starting any work
• Access usually requires removing the control panel or back panel; keep fasteners organized
• Install with original mounting screws; inspect surrounding clips and hardware for wear

This main wiring harness connects the washer's control console to the machine's electrical components, enabling reliable power and signal transmission for normal operation. Replaces a worn or damaged harness to restore electrical connectivity. What it does

• Transfers power and control signals between the washer control board and major components.
• Restores intermittent or lost functions caused by broken, burned, or corroded wiring.
• Helps resolve issues such as no-start, unresponsive controls, or erratic cycle behavior when wiring is the cause.

• 1 main wiring harness with JST-style connector(s).

• Disconnect the washer from power before starting any repair.
• Match connector shapes and wire colors; do not force connectors into place.
• Route the harness along original clips and channels to avoid pinching or heat exposure.

This screw is a factory replacement fastener used to secure appliance panels and components. It restores lost or loose hardware so parts sit correctly and operate without rattling or movement. What it does

• Secures panels, brackets, and small components to the appliance frame
• Restores proper alignment and helps eliminate rattling or vibration
• Replaces missing or stripped fasteners that prevent parts from staying fixed
• Matches OEM fit for reliable fastening where the original screw was used

• One replacement screw

• Use the correct-size screwdriver or driver bit to avoid stripping the head
• Power off and unplug the appliance before accessing internal components
• Tighten snugly but avoid overtightening to prevent thread damage
• Keep removed hardware organized so you can install replacements in the original locations

This 1/4-20 Taptite hex washer-head screw secures panels and internal components in your appliance. Its thread-forming design creates a tight, vibration-resistant hold in untapped metal to keep assemblies aligned when a fastener is missing or stripped.

• Fastens brackets, panels, and hardware to the cabinet/frame
• Taptite design forms threads in pre-punched, untapped holes for a secure fit
• Replaces missing, stripped, or rusted screws
• Helps reduce vibration and rattling from loose mounts

• Unplug the appliance; if servicing a washer, also turn off the water supply
• Align parts and start the screw by hand to avoid cross-threading
• Tighten with the appropriate nut driver or socket until snug—do not overtighten

This is a hex pan thread screw used to secure appliance panels and components. It replaces missing or damaged fasteners to restore proper fit and reduce vibration or rattling. What it does

• Secures panels, brackets, or components to the appliance frame
• Restores tight fit where a worn or missing screw caused loose panels or rattling
• Provides a hex head drive for easy tightening with the correct socket or bit
• Matches OEM fastening points when replacing the original screw

• One hex pan thread screw

• Use the correct hex socket or driver to avoid stripping the head
• Tighten until snug; avoid over-torquing which can strip threads or damage components
• Disconnect power or follow appliance safety procedures before servicing
• Keep removed hardware organized to confirm correct replacement

This bracket connector is a small metal mounting bracket that secures wiring or components inside the appliance, restoring stable alignment and connection points. It helps stop loose wires or parts from shifting and reduces intermittent electrical contact. What it does

• Provides a secure anchor point for wiring harnesses or small components
• Prevents strain on electrical connections that can cause intermittent operation
• Keeps internal parts aligned to reduce rattle and wear
• Replaces a damaged or missing mounting bracket to restore factory fit

• Inspect surrounding wiring and fasteners; replace any damaged clips or screws.
• Secure bracket with the original screws or the correct-size fasteners; do not overtighten.
• Disconnect power before accessing internal components to avoid shock or injury.

The Mode Shifter Assembly is an OEM part for GE washer/dryer units. This part is responsible for shifting between different modes such as washing, spinning, and drying. The mode shifter ensures smooth and accurate shifting, allowing for seamless transitions between the various modes of your GE washer/dryer. It engages and disengages the mode shifter mechanism, ensuring that the appropriate functions are activated at the right times.

A bad mode shifter actuator can occur due to wear and tear, mechanical failure, or electrical issues. If you notice symptoms such as the washer/dryer not shifting modes properly, unusual noises during operation, or error codes indicating a faulty actuator, it may be time to replace the component.

Symptoms of a bad mode shifter actuator include:

• Improper shifting between modes
• Unusual noises during operation
• Error codes indicating a faulty actuator

Restore the smooth operation of your GE washer/dryer by replacing the faulty mode shifter actuator with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Rod Assembly is an OEM replacement part for GE washing machines. Measuring 27 inches it is responsible for guiding the movement of the inner drum during the cycles while cushioning vibration and impact. The suspension rod assembly works together with other suspension components to absorb shock and minimize noise.

Symptoms of a bad suspension rod assembly include:

• Excessive shaking, vibrating, or rattling during operation
• Noisy operation
• Premature wear of other components

Causes of failure can be normal wear and tear over long-term use. Heavy loads, off-balance loading, or other machine misuse can exacerbate issues by placing undue stress on suspension elements.

This GE OEM part is also compatible with Hotpoint, RCA and select Kenmore models for easy replacement.

This control knob assembly restores a solid, easy-to-grip selector on your appliance's console so you can accurately choose cycles and settings. It replaces broken or stripped knobs that slip, wobble, or fall off the control shaft.

• Attaches to the control/timer shaft so you can turn and set functions
• Replaces cracked, missing, or hub-stripped knobs
• Helps resolve free-spinning knobs or knobs that won't stay on
• Maintains correct shaft engagement and a clean, finished console appearance

• Disconnect power before servicing
• Pull the old knob straight off; avoid prying against the console
• Align the new knob with the flat/splined shaft and press until fully seated
• Inspect the shaft for wear or damage before forcing

The Motor and Pulley Assembly is an OEM part for GE washers. It contains both the motor and pulley which work synergistically to spin laundry during the spin cycle while removing excess water. 

Causes of a bad motor and pulley assembly include normal wear and tear over time, contaminants in the washer tub damaging components, or damage from attempting to spin loads that are too large or unbalanced.  

Symptoms of a bad motor and pulley assembly include:

• The washer not spinning clothes during the spin cycle
• Loud grinding or clicking noises coming from the assembly
• The motor overheating during operation
• Vibrations felt in the washer tub or surrounding cabinetry

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This start button assembly is the external pushbutton on the dryer console. It lets you begin a cycle; replacing a broken or missing button restores proper engagement of the start switch and a clean, factory appearance.

• Provides the physical Start control on the console and actuates the underlying switch
• Replaces a button that is cracked, missing, loose, or won't stay in place
• Helps when the dryer won't start because the button can't press the switch
• Restores smooth, reliable button travel and appearance

• Disconnect power; if gas, shut off gas supply before moving the appliance
• Access the console, remove fasteners, release tabs, and remove the old button assembly
• Transfer any small hardware from the original as needed; align and secure the new button
• Reassemble, restore power, and test for proper button movement and start engagement

This washer tub cover closes and seals the opening of the outer tub, helping contain water and suds during wash and spin for cleaner, more reliable operation. It also supports proper water flow back into the tub. What it does:

• Seals the outer tub opening to contain wash water and reduce splashing
• Helps channel recirculation/dispense water back into the tub
• Maintains proper clearance so the basket/drum doesn't rub the rim
• Typical failure signs: leaks or splashing at the opening, visible cracks/broken tabs, rubbing or scraping noises during spin

• 1 tub cover

• Disconnect power and turn off water before servicing
• Access the tub per your model's service procedure (remove top/front panel as applicable)
• Release clips/screws and detach any hoses/fittings from the old cover; transfer any reusable parts
• Seat the new cover evenly and fully engage all tabs/clamps; reassemble and run a short test to check for leaks

The Duct Trap Assembly is an OEM part for GE dryers. This part is responsible for capturing lint and debris from your laundry, preventing it from entering the dryer vent and causing potential blockages. The drum bearing supports the drum's rotation, allowing it to spin smoothly and quietly during drying cycles. 

A bad duct trap assembly can occur due to wear and tear, damage, or blockage. If you notice symptoms such as lint escaping the lint screen, excessive noise during operation, or the drum not rotating properly, it may be time to replace this assembly.

Symptoms of a bad duct trap assembly include:

• Lint escaping the lint screen
• Excessive noise during operation
• Drum not rotating properly

Ensure the operation of your GE dryer by replacing the faulty duct trap assembly with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This agitator screw secures the washer's agitator to the drive hub/shaft. Replace a missing, stripped, or rusted screw to restore a tight, stable agitator and proper wash action while helping prevent wobble and rattling during cycles.

• Fastens the agitator to the drive hub/shaft
• Keeps the agitator from lifting or wobbling
• Helps maintain consistent agitation and wash performance
• Typical symptoms: loose or wobbly agitator, rattling/clicking during agitation, reduced cleaning results

• Disconnect power before servicing the washer
• Remove the agitator cap or fabric softener dispenser to access the screw
• Use an appropriate driver or socket; avoid cross-threading and overtightening
• Ensure the agitator is fully seated before tightening; reinstall the cap/dispenser