Gwe23gynfs Parts

8-18 x 9/16-inch hex washer head screw secures panels, brackets, and trim in appliances. Replace missing, damaged, or stripped screws for proper fit.

Replace a cracked, broken, or missing bottom divider basket in your refrigerator drawer. This organizational component helps separate items in the fresh food compartment.

Secures freezer door panels and trim to prevent rattling and maintain proper seal. Replace when screws are worn, missing, or stripped. Confirm fit with model.

Fix water pooling or ice buildup in your freezer with this trough drain. Channels defrost water to the drain tube, preventing frost accumulation issues.

This is a single #10-18 x 3/4 inch flat-head screw used to secure panels and components in appliances. It replaces worn or missing fasteners so parts stay properly mounted and aligned. What it does:

• Fastens appliance panels, brackets, and components with a flat-head finish for flush mounting
• Replaces stripped, rusted, or missing screws that cause loose or rattling parts
• Provides a secure threaded connection for consistent operation
• Compatible where a #10-18 thread, 3/4" length flat-head screw is specified

• One (1) screw, #10-18 x 3/4 in., flat head

• Use the correct screwdriver bit (flat or Phillips depending on head style) and avoid over-tightening to prevent stripped threads
• Disconnect power to the appliance and follow manufacturer safety procedures when accessing internal components
• Dispose of damaged hardware and replace with matching specifications for safe operation

Fixes intermittent operation or no power to components. This 1/4" clip connector secures wire terminals for reliable electrical connections in your fridge.

Dark gray molded corner cover that restores finished appearance of refrigerator cabinet. Replaces cracked, chipped, or missing corner caps and protects edges.

M6-1.0 x 16mm mounting screw for bottom-mount refrigerators. Secures panels, brackets, and components. Replace when stripped, missing, or damaged.

Plastic divider that fits inside the refrigerator meat pan to separate deli items and keep foods organized. Replace if cracked, broken, or missing.

This center track guides and supports the fresh-food door drawer, helping the drawer slide smoothly and stay aligned for reliable access and seal. Replaces a worn or damaged center track to restore normal movement and alignment. What it does:

• Provides a stable sliding surface for the fresh-food drawer/door
• Restores smooth opening and closing when original track is worn or cracked
• Helps maintain proper door alignment to reduce gaps that can affect cooling
• Common symptom: drawer sticks, jams, or tilts during operation

• One center track for the fresh-food drawer/door

• Turn off power to the appliance before beginning any service
• Access usually requires removing the drawer/door assembly and fasteners; keep hardware organized
• Inspect companion tracks and rollers; replace any worn pieces to ensure smooth operation

This cover harness is the factory-style electrical connector assembly that links components behind the appliance cover, restoring secure, routed wiring and reliable connections for proper operation. What it does:

• Provides factory routing and secure electrical connections between controls and internal components
• Replaces damaged, frayed or corroded wiring that can cause intermittent operation
• Helps prevent loose terminals and arcing that may lead to component failures
• Used when cover-mounted connectors or wiring no longer seat or pass power reliably

• One cover harness

• Disconnect power to the appliance before servicing to avoid shock or injury
• Handle wiring and terminals carefully; do not force connectors—align and seat fully
• Route harness as original, using existing clips and fasteners to avoid pinching or chafing

A small rubber grommet that cushions and seals the freezer liner, helping reduce vibration and prevent wear where components meet the inner cabinet. Replaces a worn or missing grommet to restore a snug fit and quieter operation. What it does

• Cushions the freezer liner and components to reduce rattling and vibration.
• Helps maintain a tight seal at the liner mounting point to limit movement and wear.
• Prevents direct metal-to-metal contact that can cause chipping or cracking of the liner.
• Commonly replaced when the liner is loose, noisy, or damaged around mounting points.

• Designed for direct replacement; remove power before accessing the freezer interior.
• Access may require removing shelves, drawers, or the liner trim; handle liner edges carefully.
• Inspect surrounding clips and fasteners; replace any damaged hardware to ensure proper fit.

This ground harness is a factory-style wire assembly that provides a safe electrical return path to reduce shock and interference risks. It restores proper grounding for affected appliance circuits and helps maintain safe operation. What it does:

• Connects appliance metal chassis/components to the ground system to prevent stray voltage and reduce shock risk
• Provides the ground path for control boards and other electrical components to function correctly
• Common symptom: appliance shows electrical faults, intermittent operation, or visible arcing at connection points
• Used when original ground wire is damaged, corroded, or has a failed connector

• One ground harness (wire assembly) as pictured

• Always unplug the appliance or disconnect power at the breaker before starting work
• Match connector types and routing to the original harness; secure all fasteners and strain reliefs
• Inspect mounting points and mating terminals for corrosion; replace fasteners if damaged

Replacement support brace that reinforces refrigerator door or trim assembly. Restores structural strength and prevents sagging or flexing of panels.

This support component helps freezer drawers or shelves slide smoothly in and out of the freezer compartment. Located inside the freezer on the side walls or bottom, replace it when drawers stick, won't slide properly, or have become loose and unstable.

Replace a cracked or missing control board cover to protect electronics from moisture and dust. Simple snap-on installation takes 10-15 minutes.