Gwe9250pwo Parts

This meat pan is the removable deli drawer that stores cold cuts, cheese and packaged meats in the refrigerator, keeping them organized and helping contain spills. Durable molded plastic fits into the fresh-food compartment tracks. What it does:

• Provides a dedicated drawer for deli items and fresh meats to keep them separated from other foods
• Helps contain juices and small spills to make cleanup easier
• Slides in and out on internal refrigerator tracks for easy access
• Restores proper fit and organization when the original drawer is cracked, warped or missing

• One meat pan / deli drawer

• Slide the pan into the existing drawer tracks; no hardware required in most installations
• Inspect tracks and mounting ribs for damage before installing; replace damaged parts as needed
• Clean with mild soap and water; avoid abrasive cleaners or high heat
• Keep out of direct heat sources and do not use in oven or microwave

The Freezer Lower Slide is an OEM replacement part for GE refrigerators. It is designed to provide smooth and easy movement of the freezer drawer, allowing for convenient access to your frozen goods.

A bad freezer lower slide can occur due to factors such as wear and tear, damage, or misalignment. If you notice symptoms such as difficulty in sliding the freezer drawer, a loose or broken slide, or an unstable freezer compartment, it may indicate a faulty or malfunctioning left freezer lower slide.

Symptoms of a bad freezer lower slide include:

• Difficulty in sliding the freezer drawer
• Loose or broken slide
• Unstable freezer compartment

Restore your refrigerator's freezer drawer by replacing the faulty left freezer lower slide with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Drier is an OEM component specifically designed for GE combination refrigerator-freezers. Absorbing moisture, its treated silica particles buffer humidity within refrigerant lines. Proper drying sustains energy-efficient performance while preventing corrosion.

Causes of a faulty drier commonly relate to saturation reducing capacity. As desiccant degrades, water passes into closed system compressors requiring change. 

Symptoms of a bad drier involve:

• Frost and ice buildup impairing cooling  
• Puddling around evaporator evidencing leaks
• Higher operating costs from impaired efficiency

Causes of a bad drier involve typical saturation shortening drying cycles. Cracks release desiccant particles risking blockages necessitating timely replacement.

This OEM GE part is also compatible with some Hotpoint, RCA, and Frigidaire combination units. Replace to retain steady humidity management protecting components and maximizing freshness years of operation.
 

This bar reinforcement is a replacement support brace that restores strength and alignment to the appliance trim or door assembly. It helps secure panels and prevents sagging or flexing for reliable everyday use. What it does:

• Provides structural support for the door or trim assembly to reduce flex and maintain alignment
• Restores a loose or sagging panel to proper position
• Helps keep connected components stable during normal operation
• Designed to fit into the original mounting points and distribute load where the factory part did

• Follow the appliance manufacturer's service manual for disassembly and reassembly steps
• Use appropriate hand tools; avoid overtightening fasteners to prevent damage
• Disconnect power (or gas, if applicable) and remove food/contents from working area before starting

This self-adhesive foam strip provides a flexible seal and buffer for appliance gaps, helping reduce drafts, rattling, and moisture intrusion. Designed for easy stick-on replacement where foam padding or sealing is needed. What it does

• Seals small gaps between components to help reduce air leaks and temperature loss
• Cushions panels and doors to minimize noise and vibration
• Helps block moisture and dust from entering sensitive areas
• Self-adhesive backing allows for quick placement without extra glue

• One self-adhesive foam strip

• Surface must be clean and dry; wipe with isopropyl alcohol for best adhesion
• Measure and trim the foam strip to fit—use scissors or a utility knife
• Press firmly along the length to ensure full contact; allow adhesive to set before closing doors or panels
• For safety, disconnect power to the appliance before working in internal areas

This condenser fan and housing assembly circulates air across the condenser coils to help your refrigerator dissipate heat and run efficiently. Replaces a damaged or worn housing and fan to restore proper airflow and cooling performance. What it does

• Moves air over condenser coils so the compressor can shed heat and maintain cooling
• Prevents overheating and helps the system run more efficiently
• Can stop loud fan noise, rattling, or reduced cooling when the fan or housing is damaged
• Restores correct airflow when the original housing is cracked, bent, or obstructed

• One condenser fan and housing assembly

• Disconnect power to the appliance before starting any repair
• Access may require removing rear or bottom access panels; keep track of fasteners
• Handle sheet metal edges and fan blades carefully to avoid cuts and damage
• After installation, verify fan spins freely and recheck connections; confirm proper cooling

This steel pin hinge secures and pivots the appliance door, restoring proper alignment and smooth opening/closing. Durable metal construction replaces worn or bent hinges to help maintain a consistent door seal and fit. What it does:

• Provides the pivot point that allows the door to swing open and closed
• Restores proper door alignment and prevents sagging or uneven gaps
• Helps the door close fully to maintain appliance temperature and efficiency
• Replaces corroded, bent, or broken hinge pins that cause noisy or stiff operation

• Unplug the appliance or disconnect power before starting work; for refrigerators also turn off water if applicable
• Support the door when removing the old hinge to prevent injury or damage
• Use basic hand tools;

This refrigerator door gasket seals the door to keep cold air in and help maintain consistent temperatures and food freshness. A properly sealing gasket reduces energy loss and limits frost or moisture buildup. What it does

• Forms an airtight seal around the refrigerator door to prevent warm air intrusion.
• Helps maintain consistent internal temperature for better food preservation.
• Common signs a gasket needs replacement: warm sections inside the fridge, visible cracks or tears, condensation or frost buildup, or the door not closing flush.
• Fits white-colored doors or trim where a white gasket is specified.

• Disconnect power to the appliance before starting major service.
• Clean the door frame sealing surface and remove old adhesive or debris before installing the new gasket.
• Inspect the door and hinge alignment; ensure the gasket seats evenly around the door.

This switch actuator is the replacement lever that engages a refrigerator door/dispenser switch so controls respond reliably. It restores proper switch actuation to help items like lights, dispensers, or ice/water controls work correctly. What it does:

• Replaces a worn or broken actuator that fails to depress the switch plunger
• Allows the door or dispenser mechanism to trigger the switch reliably
• Helps resolve symptoms such as lights not turning on, dispenser or ice/water functions not responding, or intermittent switch behavior
• Works with the corresponding OEM door/dispenser switch assembly to restore normal operation

• One switch actuator

• Disconnect power (unplug or shut off breaker) before starting work
• Access may require removing the door panel or dispenser bezel; keep fasteners and trim organized
• Inspect the mating switch and surrounding parts for damage; replace the switch if the plunger is worn or broken

This glide support secures and guides a refrigerator drawer so it opens and closes smoothly, helping restore proper alignment and load-bearing for the left-side drawer. Ideal when the drawer slips, binds, or drops out of its track. What it does:

• Supports the drawer glide/slide mechanism on the left side and keeps the drawer tracking correctly
• Prevents the drawer from sagging, catching, or falling out when pulled
• Restores smooth, even drawer movement and reduces binding or rough operation
• Works with the refrigerator's existing slide hardware to carry drawer weight safely

• Unplug the appliance before starting any repair to avoid shock or injury
• Remove the drawer and existing glide hardware to access mounting points; basic hand tools (screwdriver) typically required
• Inspect mating slide components for wear and replace both sides if damaged for best performance

This evaporator block seal is a refrigerator freezer gasket that helps seal the evaporator assembly to limit air and moisture migration, reducing frost buildup and helping the cooling system run efficiently. What it does:

• Seals the evaporator block area to prevent moist air from reaching cold surfaces
• Helps reduce frost and ice accumulation on the evaporator and evaporator cover
• Supports consistent cooling by maintaining the intended airflow path
• Can reduce defrost frequency when the original seal is damaged or worn

• 1 evaporator block seal

• Disconnect power to the appliance before starting any repair
• Replacement typically requires removing the evaporator cover or assembly; handle evaporator fins and components carefully
• Inspect surrounding foam, clips, or adhesive; replace or resecure as needed to ensure a proper seal
• After installation, restore power and verify proper cooling and defrost operation

This is a right-hand refrigerator door closure that helps the door latch and stay aligned for a proper seal, reducing warm air entry and improving cooling consistency. Designed to replace a worn or broken closure on compatible units. What it does:

• Guides and supports the door at the correct closing position to maintain a proper seal
• Helps prevent the door from sagging or drifting open when the closure is worn
• Reduces warm-air leakage that can cause cooling loss or higher energy use
• Stops clicking or rubbing noises caused by a damaged closure

• Disconnect power to the appliance before beginning work to avoid injury
• Basic hand tools typically required; handle parts and sharp sheet metal carefully
• Remove door or trim panels as needed to access the closure

This duct air tower assembly directs cold air through the freezer/refrigerator cabinet to maintain even cooling and proper airflow. Replaces a damaged or cracked air tower to reduce warm spots and restore consistent circulation. What it does:

• Channels cold air from the evaporator into the cabinet, helping maintain uniform temperatures.
• Helps prevent localized warm spots and food spoilage caused by disrupted airflow.
• Restores proper defrost/airflow routing if the original duct is cracked, warped, or missing.
• Works with the evaporator/airflow system—symptoms include uneven cooling, frost buildup, or reduced airflow.

• One duct air tower assembly

• Disconnect power to the appliance before beginning any repair.
• Access requires removing interior panels/shelves—handle plastic parts gently to avoid cracking.
• Inspect mating seals and clips; replace any damaged fasteners for a secure fit.

This evaporator cover houses and protects the freezer evaporator coil while directing airflow for even cooling and helping limit frost buildup. It restores proper airflow routing behind the freezer liner for consistent temperature control. What it does:

• Protects the evaporator coil from contact and debris
• Guides cold air from the evaporator into the freezer compartment
• Helps reduce localized frost accumulation on the coil and liner
• Can address symptoms like poor/freezer cooling, uneven temperatures, or increased frost/icing

• One evaporator cover (housing) as shown

• Disconnect power before beginning any repair
• Remove interior panels and shelves per your model's service instructions to access the evaporator area
• Handle carefully to avoid damaging the cover tabs, mounting points, or nearby wiring/insulation
• After installation, reassemble panels and verify proper fan operation and normal cooling

This selector control provides the hi/lo switching function for the oven/range heating circuit, restoring user control over high and low heat settings. It replaces a failed selector so the range can select the proper heat level reliably. What it does:

• Switches between high and low heat settings for the heating element or burner
• Restores control when heat setting changes do not respond or stick
• Helps eliminate intermittent or no-heat conditions caused by a worn selector
• Matches OEM function and mounting for a direct replacement

• One selector control assembly as shown

• Disconnect power to the appliance before starting any repair
• Handle electrical connections carefully; note wire locations or take a photo before removal
• Use basic hand tools; do not force connectors or mounting tabs