Gye22gynfs Parts

This quick-connect clip secures 5/16-inch water tubing in push-to-connect fittings to prevent accidental release and leaks at the joint. Restore a reliable hold on dispenser and icemaker lines when the original clip is missing or damaged. What it does:

• Locks the release ring (collet) on a 5/16-inch quick-connect fitting to retain tubing
• Helps prevent water drips or leaks at the connector
• Keeps tubing from slipping out, supporting steady water flow to dispenser/ice maker
• Common symptoms: leak at fitting, loose/disconnected tubing, no/low water or ice

• 1 quick-connect clip (5/16)

• Unplug the appliance and shut off the water supply; dispense water to relieve line pressure
• Ensure the tubing end is cut square; push it fully into the fitting until seated
• Insert the clip beneath the fitting's collet to lock; tug gently to verify retention
• Restore water and power, then check all connections for leaks

• Designed for 5/16-inch OD water tubing quick-connect fittings

This guide roller is used in the vegetable/crisper pan area. It supports and guides the drawer along its track so it glides smoothly and stays aligned when opening and closing, replacing a worn, cracked, or missing roller.

• Supports the vegetable/crisper pan on its slide path to reduce friction
• Helps the drawer roll in and out smoothly and evenly
• Maintains alignment to prevent binding, sagging, or the pan dropping off the track
• Common symptoms: drawer hard to open/close, wobbles, scrapes, or a visibly broken/missing roller

• Disconnect power before servicing
• Remove the crisper drawer and cover/shelf as needed for access
• Detach the damaged roller from its mount and attach the new roller securely
• Reinstall components, confirm smooth, even travel, and test drawer operation

This trough drain directs defrost water from the evaporator to the refrigerator drain system, helping prevent water buildup and puddling inside the freezer compartment. It's a direct-fit replacement for the damaged or cracked drain trough. What it does:

• Channels defrost and condensation water away from the evaporator area to the main drain
• Prevents ice buildup and water pooling that can lead to floor or compartment leaks
• Restores proper drain flow when original trough is cracked, warped, or clogged
• Works with the refrigerator's defrost cycle to keep the compartment dry

• One trough drain piece

• Disconnect power to the appliance before starting any work
• Remove stored food and secure shelving or trim that blocks access to the evaporator area
• Inspect and clear the drain path and drain tube while installing the new trough

This screw set replaces worn or missing fasteners used on the freezer door assembly to restore secure attachment of door components. Ideal for fixing loose panels and reducing rattling so the door sits and seals properly. What it does:

• Secures freezer door components and trim to the door assembly.
• Restores proper fit and alignment when screws are corroded, stripped, or missing.
• Helps eliminate door rattles and loose panels that can affect door seating.
• Matches OEM fastener type and lengths used on the freezer door assembly.

• Screw set for freezer door

• Disconnect power and empty the door area before starting work.
• Use the correct screwdriver or bit to avoid stripping heads; install screws until snug—do not overtighten.
• Keep removed parts in order and follow OEM instructions for reassembly.

This is a replacement bottom divider basket. This is a genuine OEM part made by General Electric and has been sourced directly from the manufacturer. This part is intended to replace a cracked or defective divider basket in a variety of different refrigerator models. This divider basket is intended for the bottom drawer of the refrigerator.This divider slots into the center of the bottom refrigerator basket. It can be used to divide the basket drawer into two sides to keep food separated and organized. Over time and with regular use, the divider can become broken or cracked and will require replacing. For safety purposes, always ensure the refrigerator is completely disconnected from its power source before starting any repair work. No special tools are needed to install this part; simply slot the divider into place. Please make sure to follow appropriate safety precautions when attempting to fix any appliances. For more accurate information on how and where to install this bottom divider basket, the appropriate owner's manual and included diagrams should be referred to.As an authentic replacement part, this divider basket is suitable for use on several different models of refrigerators manufactured by General Electric and Hotpoint. This is a genuine part made of high-quality, durable plastic and is sold individually.

This meat pan divider separates foods inside the deli/meat pan to prevent cross-contact and keep items organized for easier access. It restores the original compartment layout so deli trays stay separated and tidy. What it does:

• Fits into the refrigerator's meat/deli pan to create separate sections for different foods
• Prevents items from shifting and mixing during drawer use
• Helps contain juices and reduces cross-contamination between foods
• Useful when cracked, missing, or warped dividers allow foods to mingle

• Slide the divider into the existing grooves or slots in the meat/deli pan; no tools typically required
• Clean surfaces and sanitize the divider before first use
• Do not use in the oven or expose to open flame; intended for refrigerator use only
• Inspect for proper seating after installation to ensure secure separation

The Left Door is an OEM replacement part for GE refrigerators. It is designed to fit the left side of the refrigerator, providing a secure seal and easy access to the contents inside.

A bad left door can occur due to factors such as wear and tear, damage, or misalignment. If you notice symptoms such as air leaks, difficulty in opening or closing the door, or condensation forming on the interior, it may indicate a faulty or malfunctioning left door.

Symptoms of a bad left door include:

• Air leaks around the door seal
• Difficulty in opening or closing the door
• Condensation forming on the interior

Restore your refrigerator by replacing the faulty left door with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This is a single #10-18 x 3/4 inch flat-head screw used to secure panels and components in appliances. It replaces worn or missing fasteners so parts stay properly mounted and aligned. What it does:

• Fastens appliance panels, brackets, and components with a flat-head finish for flush mounting
• Replaces stripped, rusted, or missing screws that cause loose or rattling parts
• Provides a secure threaded connection for consistent operation
• Compatible where a #10-18 thread, 3/4" length flat-head screw is specified

• One (1) screw, #10-18 x 3/4 in., flat head

• Use the correct screwdriver bit (flat or Phillips depending on head style) and avoid over-tightening to prevent stripped threads
• Disconnect power to the appliance and follow manufacturer safety procedures when accessing internal components
• Dispose of damaged hardware and replace with matching specifications for safe operation

This PCB cover assembly protects and secures a range of control electronics, keeping the control board safe from dust, debris and accidental contact. It restores the original housing and helps maintain reliable board operation. What it does:

• Shields the control PCB from moisture, crumbs and physical damage
• Helps prevent shorts caused by loose wires or foreign objects
• Keeps wiring and connectors routed and secured to reduce strain
• Restores proper fit and spacing over the control board for normal operation

• One PCB cover assembly

• Disconnect power to the appliance before servicing to avoid shock
• Handle the control board and connectors carefully; avoid touching components and use anti-static precautions if available
• Use basic hand tools to remove mounting screws/clips and secure the cover in the original position
• If you see damaged wiring or a compromised control board, replace components as needed before reassembly