Gye22hskss Parts

This screw hinge center adjuster is a replacement hinge screw that helps align and secure the appliance door for smooth opening and a proper seal. Designed to restore correct door positioning and prevent sagging or uneven gaps. What it does:

• Replaces the center hinge screw/adjuster used in the door hinge assembly
• Helps realign the door to correct sagging, uneven gaps, or misalignment
• Secures hinge parts to maintain stable door movement and a tight seal
• Compatible with common symptom: door rubbing, dragging, or not closing evenly

• One screw hinge center adjuster

• Basic hand tools required; support the door during removal and installation
• Follow manufacturer service manual steps for hinge removal and door alignment
• Keep fasteners snug but avoid over-tightening to prevent stripping
• Turn off power to powered doors/controls and work with care around edges

This is a replacement 8-18 x 1/2" flat-head slotted screw commonly used to secure appliance panels and components. It restores proper fastening and helps eliminate rattles, loose trim, or misaligned parts. What it does:

• Secures panels, brackets, and trim to restore proper fit
• Stops vibration-related noise caused by loose fasteners
• Replaces missing or stripped screws to prevent parts from shifting
• Works where a flat-head, slotted-drive #8 screw with 1/2" length is required

• One 8-18 x 1/2" flat-head slotted screw

• Use the correct size slotted screwdriver to avoid cam-out or head damage
• Tighten until snug; avoid over-torquing which can strip threads or deform panels
• Replace any stripped mating hardware for secure fastening
• Disconnect power before doing repairs on appliances where required for safety

This wheel overmold assembly replaces a worn front wheel to restore smooth drum rotation and reduce noise. It mounts to the dryer front support to help the drum roll evenly and prevent metal-on-metal wear. What it does:

• Provides a cushioned wheel surface that supports the dryer drum and improves rotation
• Reduces squeaking, scraping and grinding caused by a worn or damaged front wheel
• Helps maintain proper drum alignment for even tumbling and reduced wear on seals
• Extends the life of the front support by preventing direct metal contact

• Disconnect power before beginning repair to avoid electrical hazard
• Access the front support assembly per your dryer's service instructions; inspect adjacent rollers and glides for wear
• Fit the overmold onto the wheel hub and secure per OEM guidance; verify smooth drum rotation before reassembly
• If other support components show wear, replace them to prevent premature failure

The Door Light Switch is an OEM part for GE refrigerators. It is designed to control the interior light of the refrigerator, turning it on when the door is opened and off when the door is closed.

Causes of a bad door light switch can include wear and tear over time, electrical malfunctions, or physical damage from regular use. A faulty switch can lead to improper functioning of the refrigerator light, impacting visibility inside the unit.

Symptoms of a bad Door Light Switch include:

• Refrigerator light not turning on or off correctly
• Light flickering or remaining dim
• Light staying on even when the door is closed

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Cover Latch is an OEM part for GE refrigerators. This part serves as a cover for the latch handle, ensuring a seamless look for the appliance while protecting the latch handle from damage and wear.

Causes of a bad Cover Latch can include wear and tear over time, impact or mishandling that leads to cracks or breaks, or general deterioration due to prolonged use.  

Symptoms of a bad Cover Latch include:

• Visible cracks or breaks
• The latch handle not being properly covered
• Difficulty in operating the latch handle
• Loose or missing cover latch

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Freezer Basket and Glides is an OEM replacement part for GE refrigerators. It provides an adjustable storage shelf solution within the freezer compartment. 

Causes of a bad basket and glide set can include wear and tear over time, as well as damage from accidentally overloaded baskets. Mineral buildup may impede proper sliding.

Symptoms of failure include:

• Difficulty easily removing or replacing baskets due to jammed glides
• Baskets or glides cracking or breaking from excessive weight or impacts  
• Inability to keep baskets securely locked in desired positions 

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The RFID Water Filter Board is an OEM part for GE refrigerators. It is an electronic component located inside the filter housing that reads the RFID chip in Genuine GE water filters. The board monitors filter life and provides notification when it's time for a replacement. 

Symptoms of a bad RFID water filter board include:

• Inability to detect when a new filter is installed  
• Error codes or filter life indicators not functioning properly
• Water dispenser not working or dispensing unfiltered water

Causes may include damage from moisture or leaks over time, failure of electronic components, or normal wear and tear.

This replacement board is also compatible with Hotpoint, RCA, and some Kenmore models.

This refrigerator drain tube and valve assembly channels defrost water to the drain pan, while the valve helps block warm air from entering the drain. Replace a cracked or clogged assembly to address leaks and recurring ice buildup. What it does:

• Routes defrost water from the evaporator to the drain pan beneath the unit
• Integrated valve helps prevent warm air backflow that can lead to frost and drain clogs
• A damaged or obstructed tube/valve may cause water inside the compartments or on the floor
• Visual cracks, deformation, or blockage indicate the assembly should be replaced

• One drain tube and valve assembly

• Disconnect power and wear cut-resistant gloves before servicing
• Pull the refrigerator forward and remove the rear lower access panel
• Locate the drain outlet above the drain pan; remove the old tube/valve and clear any debris from the drain
• Seat the new assembly fully and ensure proper routing into the drain pan before restoring power

The Meat Pan Slide is an OEM part for GE refrigerators. It is located on the upper shelf and allows for pulling out a multi-purpose pan ideal for storing large food items. 

Causes of a bad Meat Pan Slide can include damage or deformity from exposure to heavy loads over time, broken or cracked plastic parts from repeated pull-out/push-in movement, or obstruction from built-up ice or debris inside the rails.

Symptoms of a bad Meat Pan Slide include:

• The slide becomes stuck and failing to extend or retract
• Gaps appearing between the slide and rails allowing for food items to fall 
• Cracked or broken parts that cause instability or inability to properly support food pans

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.

You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.

Symptoms of a bad R134 drier include:

• Reduced cooling efficiency
• Frost buildup on the evaporator coils
• Unusual noises from the refrigeration system
• Increased energy consumption
• Refrigerator not maintaining the set temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Refrigerator Evaporator with Heater is an OEM part for GE refrigerators. This component cools the air within the freezer and fresh food compartments through vaporization and circulation. It also contains an internal heater to prevent condensation and frost formation.

Causes of a bad evaporator can include normal wear over time, damage from leaks, or issues with the heater component. 

Symptoms of a bad evaporator include:

• Inadequate or inconsistent cooling within compartments  
• Frost or condensation buildup that requires frequent defrosting
• High energy usage but inability to maintain proper temperatures
• Foreign or musty odors emanating from within the refrigerator

Replace this evaporator to restore optimal cooling performance, efficiency, and freshness preservation in your refrigerator. This GE OEM part is also compatible with later Hotpoint, RCA, and select Kenmore refrigerator models.
 

The Freezer Door Handle is an OEM part for GE refrigerators. This door handle ensures easy access to your frozen goods. It allows you to effortlessly open and close the freezer door, providing a comfortable grip for everyday use.

A bad freezer door handle can occur due to wear and tear, accidental damage, or other factors. If you notice symptoms such as a loose or broken handle, difficulty in opening or closing the freezer door, or an unsightly appearance, it may be time to replace the handle.

Symptoms of a bad freezer door handle include:

• Loose or broken handle
• Difficulty in opening or closing the freezer door
• Unattractive or worn-out appearance

Restore your refrigerator's freezer compartment by replacing the faulty door handle with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Icemaker Fill Cup is an OEM replacement part for GE refrigerators responsible for directing the water flow into the icemaker, allowing for the creation of ice cubes. It securely attaches to the icemaker, preventing any leaks or spills that could disrupt the ice production.  

A bad fill cup can occur due to several factors. Common causes include cracks, damage, or wear and tear over time. If you notice symptoms such as leaks around the icemaker, improper ice production, or water overflow, it may indicate a need to replace the fill cup.

Symptoms of a bad fill cup include:

• Leaks around the icemaker area
• Insufficient or inconsistent ice production
• Water overflow or spills

Restore your refrigerator's ice-making capabilities by replacing the faulty fill cup with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Icemaker Fill Tube Heater is an OEM component specifically designed for GE refrigerators. Located near the icemaker assembly, this heating element plays a crucial supporting role.

Symptoms of a bad fill tube heater include:

• Irregular or inconsistent ice production amounts  
• Cracked, cloudy or malformed ice cubes being generated
• The icemaker failing to operate or stop working altogether
• Water or moisture around the refrigerator icemaker area 

Causes can include wear over time from powering on during each ice-making cycle. Mineral deposits may also form and insulate the heating surface, reducing effectiveness.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.