Hbl0845uc/07 Parts

This control module is the appliance's electronic brain. It interprets inputs from the user interface and sensors, then switches power to the appropriate components so cycles run correctly and reliably.

• Coordinates cycle timing and core functions
• Receives signals from switches/sensors and drives relays to power loads
• Common symptoms of a failed board: unresponsive controls or won't start, cycles that won't advance/finish, intermittent operation, random lights/beeps, or error codes
• May show visible damage such as burnt spots or blown components

• Disconnect power at the breaker or unplug the unit before servicing
• Use ESD protection and handle the board by the edges
• Photograph wiring and transfer connectors one at a time to the matching terminals
• Follow model-specific service steps; some units require initialization/diagnostics after replacement

This grille for pan is a replacement trim piece that restores proper airflow and appearance around the appliance pan. It helps keep the pan area protected and looking finished after repair. What it does:

• Covers and ventilates the pan opening to help direct airflow and prevent debris entry
• Replaces a cracked, warped, or missing grille to restore fit and finish
• Helps eliminate rattling or rubbing caused by a damaged trim piece
• Matches OEM fit so it installs cleanly with the original mounting points

• Install requires removal of the surrounding trim or access panel; follow your appliance manual
• Handle carefully to avoid scratching the finish; use non-marring tools as needed
• Disconnect power to the appliance before working in the service area
• Replace damaged clips or screws with OEM fasteners for secure fit

This metal mounting bracket secures internal components and panels to restore proper alignment and reduce rattling. It's a straightforward replacement part that helps keep appliance panels and assemblies firmly in place for reliable operation. What it does:

• Provides a secure attachment point for panels or internal assemblies to prevent movement and vibration
• Helps correct alignment issues that can cause rubbing, gaps, or noise
• Restores the original fit where a bent, cracked, or missing bracket caused loose parts
• Works with the appliance's existing fasteners and mounting points

• Remove power and, if applicable, disconnect the appliance from water before beginning work
• Use the factory fasteners or OEM replacement screws to secure the bracket in the original location
• Verify alignment of the attached panel or assembly before fully tightening fasteners

This cap is a direct-fit replacement closure used to protect and seal an exposed opening or component on compatible Bosch appliances, preventing dirt, moisture and damage for reliable operation. What it does:

• Covers and seals an exposed port or fastener to keep contaminants out
• Protects internal components from moisture and debris that can cause malfunctions
• Replaces cracked, warped or missing caps that allow leaks or debris intrusion
• Restores proper fit and appearance where a damaged cap leaves an opening

• Disconnect appliance power and water supply before starting any repair
• Verify the cap matches the damaged/original part before installation
• Press or snap the cap into place until fully seated; do not force or pry
• Inspect mating surfaces for damage or debris and clean before installing

This electronic control module manages and times dishwasher cycles, buttons, and displays so your appliance responds correctly to selections and runs programmed wash sequences. Replacing a failed control restores normal cycle control and user interface operation. What it does:

• Controls wash, rinse, and drying cycle sequences and timings
• Interprets front-panel inputs and starts or cancels selected cycles
• Communicates status to display/LED indicators and other internal components
• Stops operation or prevents cycles when internal faults or errors are detected

• One control module

• Disconnect power at the breaker before beginning any service to avoid shock
• Access typically requires removing the console or inner door panel; handle electronics with care
• Observe static-sensitivity precautions and avoid touching circuit traces or components

This is a small OEM retainer clip designed to secure wiring, hoses or small components inside the appliance to prevent rubbing, chafing and noise. It helps keep internal parts in their intended position for reliable operation. What it does:

• Holds wiring harnesses or small hoses in place to prevent contact with moving or hot parts
• Reduces rattling and vibration-related noise by keeping components secured
• Prevents wear and potential damage caused by loose or rubbing wires and hoses
• Helps maintain proper routing so related components continue to function as intended

• Disconnect power and water before accessing internal components
• Inspect surrounding area and replace any damaged or worn clips with the same style
• Press clip into the designated mounting slot or panel until it seats securely; ensure harness/hose is routed correctly
• Use caution around sharp sheet metal; wear gloves and follow appliance manufacturer instructions

This support mounting bracket secures internal components to the appliance frame, restoring proper alignment and stable operation. It replaces a worn, broken, or loose support to help reduce rattling and prevent component sag. What it does:

• Provides a secure mounting point for internal parts and assemblies
• Re-establishes correct alignment when a bracket is bent or broken
• Helps reduce vibration and rattling caused by loose or damaged supports
• Commonly replaced when a component shifts, rubs, or no longer sits flush

• Disconnect power and water before starting any repair.
• Basic hand tools are typically required; follow OEM service instructions for disassembly/reassembly.
• Inspect adjacent fasteners and clips; replace any that are damaged to ensure a secure fit.

This trim plate is a decorative panel that restores the finished look of the appliance opening and helps cover gaps around the control or access area. It provides a clean, factory appearance and prevents dirt from collecting in the seam. What it does:

• Covers and finishes the edge of an opening or control area for a seamless appearance
• Helps keep crumbs, dust and spills from entering gaps around the appliance face
• Replaces bent, scratched or discolored trim that affects the appliance look
• Restores proper alignment where a damaged trim creates visible gaps

• One trim plate

• Disconnect power to the appliance before attempting removal or installation
• Handle carefully to avoid scratching the finished surface; use soft gloves if available
• Retain any mounting screws or clips from the original trim and reuse if appropriate

This mounting bracket secures appliance panels or components in place to restore proper fit and stable operation. A simple replacement when a broken or bent bracket causes rattling, misalignment, or loose panels. What it does

• Provides structural support to hold panels, trim, or assemblies in position
• Prevents rattling and vibration from a loose or damaged bracket
• Restores proper alignment of the attached component for normal operation
• Can fail from bending, cracking, or fastener loss, leading to gaps or movement

• One mounting bracket

• Disconnect power and shut off water before starting any repair
• Use appropriate tools to remove fasteners; keep track of mounting screws or clips
• Inspect surrounding parts and fasteners for damage; replace any stripped hardware
• Handle sharp edges carefully and test fit before reassembly