Hbl5450uc/6 Parts

The Display Module is an OEM replacement part for Bosch ovens. It serves as the primary interface for users to control and monitor the oven's functions. This module typically features a digital display or screen that shows various settings, temperature readings, and cycle information. It also includes buttons or touch controls for users to input their desired cooking parameters.

Symptoms of a bad Display Module include:

• Blank or flickering display
• Inaccurate temperature readings or settings
• Unresponsive buttons or controls
• Error codes or warning messages appearing on the display

Causes of a bad display module can range from electronic component failure, exposure to moisture or spills, power surges or electrical issues, to general wear and tear over time. Physical damage from impact or mishandling can also contribute to the malfunction of the module.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore oven models.

This replacement glass panel restores the visible door surface on compatible BOSCH appliances, helping repair cracks, chips, or scratches and returning the door to proper cosmetic condition. Use to replace broken or damaged door glass. What it does:

• Serves as the exterior/interior glass surface of the appliance door
• Replaces cracked, chipped, scratched, or otherwise damaged door glass
• Restores the door's appearance and supports proper door assembly fit
• Helps prevent direct exposure of internal components that damaged glass might allow

• Turn off power to the appliance and disconnect power before beginning service
• Handle the glass carefully; wear cut-resistant gloves and eye protection
• Door disassembly is commonly required — follow the manufacturer's service manual
• Do not use if shipping damage is evident; contact seller before installation

This trim plate is a decorative front trim piece that restores the finished appearance of your appliance and covers the seam between control panels or door edges. It helps keep edges sealed and improves overall aesthetics. What it does:

• Provides a finished, factory look by covering exposed gaps or seams
• Protects underlying edges from dust, dirt and light impacts
• Helps maintain alignment and appearance around the control/door area
• Commonly replaced when the original trim is scratched, dented or warped

• Disconnect power to the appliance before starting any work.
• Installation typically requires removing adjacent trim or screws; keep fasteners for reuse.
• Handle painted or chrome finishes carefully to avoid scratches; use gloves if available.

This is a replacement nut used to secure internal appliance components. It restores proper fastening so assemblies stay tight and reduces noise or movement caused by loose hardware. What it does:

• Secures brackets, trim or internal components to prevent parts from shifting
• Stops rattling or vibration caused by a missing or loose nut
• Restores proper fastening after maintenance or repair
• Helps maintain correct alignment of the secured component

• Disconnect power and water before accessing internal parts
• Use appropriate hand tools and a firm grip; avoid power tools that can over-torque
• Do not overtighten — snug until secure to avoid stripping threads
• Replace any corroded or damaged mating hardware for a lasting repair

This cable harness connects key electrical components to restore power and signal flow in the appliance. It replaces a damaged or faulty wiring harness to help return controls and components to normal operation. What it does:

• Carries power and control signals between the control board and components
• Replaces frayed, burned, or broken wires that cause intermittent or no operation
• Common symptoms it can address: appliance won't start, controls unresponsive, intermittent cycles, or error codes related to open/shorted circuits
• Helps ensure secure connector mating and correct signal routing when installed properly

• Disconnect power at the breaker or unplug the appliance before starting any repairs
• Compare the new harness to the old one and follow the appliance wiring diagram for correct routing and connector placement
• Secure connectors fully; avoid sharp bends or pinching the wires during reassembly

This sealing plug closes an unused port or opening to prevent leaks and keep internal components protected. It restores a watertight seal and helps prevent debris or moisture from entering appliance cavities. What it does:

• Seals an open port or service access to stop water leaks and moisture intrusion
• Helps keep debris and contaminants out of pumps, valves or internal cavities
• Restores proper sealing after maintenance or component replacement
• Can reduce risk of water damage or corrosion when installed correctly

• Disconnect power and water supply before accessing the part
• Inspect any O-rings or sealing surfaces; replace damaged seals
• Hand-tighten or press into place per manufacturer guidance; avoid over-tightening

This is a small OEM retainer clip designed to secure wiring, hoses or small components inside the appliance to prevent rubbing, chafing and noise. It helps keep internal parts in their intended position for reliable operation. What it does:

• Holds wiring harnesses or small hoses in place to prevent contact with moving or hot parts
• Reduces rattling and vibration-related noise by keeping components secured
• Prevents wear and potential damage caused by loose or rubbing wires and hoses
• Helps maintain proper routing so related components continue to function as intended

• Disconnect power and water before accessing internal components
• Inspect surrounding area and replace any damaged or worn clips with the same style
• Press clip into the designated mounting slot or panel until it seats securely; ensure harness/hose is routed correctly
• Use caution around sharp sheet metal; wear gloves and follow appliance manufacturer instructions

This replacement control knob restores user control over a stove or range control. It gives a simple, reliable interface for selecting heat or function when the original knob is worn, cracked, or missing. What it does

• Replaces a worn or damaged control knob to restore tactile control and accurate setting selection
• Fits onto the stove/range control shaft to allow turning to desired heat or function positions
• Common symptom fix: knob is loose, cracked, stripped, or will not turn cleanly
• Helps prevent direct contact with the control shaft and improves usability

• Usually installs by pulling the old knob straight off the control shaft and pushing the new knob fully onto the splined shaft
• Match the knob orientation to the shaft flat/spline before pushing on; do not force or hammer into place
• Disconnect power to the appliance before servicing if working near electrical components; shut off gas when applicable

This cable harness routes power and signals between appliance controls and components to restore reliable electrical connections and normal operation. It replaces damaged, frayed, or disconnected wiring to help resolve intermittent or failed component function. What it does:

• Provides factory-style wiring and connector ends for secure electrical connections
• Re-establishes communication between control board and sensors, switches, or motors
• Helps eliminate intermittent power, no-start, or unresponsive control symptoms caused by damaged wiring
• Prevents arcing and shorting from exposed or broken wires when installed correctly

• One complete cable harness assembly as shown

• Disconnect power and water before starting work to avoid shock or injury
• Handle connectors by the housings; avoid pulling on individual wires
• Verify connector orientation and full seating; secure routing to original clips/retainers

This adhesive tape is a replacement mounting and sealing strip that helps secure appliance trims and lightweight components while providing a low-profile seal against dust and vibration. It restores proper fit and finish for affected panels. What it does:

• Provides a durable adhesive surface to hold trim pieces, panels, or insulation in place
• Helps reduce rattle and vibration by keeping parts snugly seated
• Creates a simple dust and moisture-resistant seal at seams or joints
• Useful when original tape has lost tack or deteriorated with age

• Clean and dry both surfaces thoroughly before applying for best adhesion
• Press firmly along the tape length and allow recommended set time before reassembling
• Trim to fit if necessary; avoid stretching the tape during installation
• If replacing tape on electrical components, disconnect power before starting work