Hdc1804tw Parts

This genuine Husqvarna fuel cap provides cover and protection to the hole into which engine oil is dispensed on certain lawn mowers, lawn tractors, and snowblowers. This fuel cap should remain closed when the appliance at hand is not in use in order to prevent leakage.If the engine of a small engine appliance is suffering from frequent leakages, there could be damage in the fuel cap that is causing the leaks. A fuel cap could also become misplaced. If the cap is broken or lost, it must be replaced immediately before using the small engine appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This fuel cap is compatible with the following brands: Husqvarna, Poulan, Ariens, and Craftsman. This part is sold individually.

This is a brand new steering column flanged bushing for use with different outdoor power equipment. This bearing can be found on the front axle and contributes to the function of the steering system. It is made from plastic and is 25/32 in height with a flange outside diameter of 1 1/8in. A worn bushing can contribute to the excessive wear on the steering gears. Sloppy steering is one of the signs of a worn bushing. Use a wrench to remove or attach this part. This OEM part is sourced from the manufacturer and is sold individually. It works on certain ride mowers from many brands, including Craftsman, Husqvarna, Poulan, and Weed Eater.

This hub cap is manufactured by Husqvarna and comes in glossy black color. The main function of a hub cap is to provide a protective barrier or cover for the wheel hub and lug nuts against dirt, grime, and other harmful elements. Wheels that do not have hub caps are more susceptible to damage. Corrosion or rust on the lug nuts is common for wheels free of hubcaps. This results in harder lug nut removal. Over time, rust can spread and damage the hub. With hub caps installed, costly repairs and replacements are no longer a concern. Installing a hub cap will take less than five minutes. A rubber ballet can be used to push the hub cap to the wheel hub. To install this genuine front hub cap, simply push it down or use a rubber mallet. When protecting the hub and axle of a lawnmower, this Husqvarna 532104757 Front Axle Hub Cap OEM replacement is an option. It is an OEM front axle hub cap compatible with most Husqvarna Weed Eater, Poulan and Craftsman tractor and mower models. This front axle hub cap is sold individually.

This replacement part is an ignition switch and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. The ignition switch is an important part of many different lawn mowers, as it allows the appliance to be turned on.A new ignition switch might be needed if the current one is damaged, broken, or if the key blade is snapped off in the ignition. If the user is unable to start the machine through the ignition switch, it is likely damaged or malfunctioning. It is possible for the ignition switch might need to be replaced after years of normal wear and tear. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

This grease fitting is a genuine Husqvarna part, sold individually. This grease fitting can be used as a replacement part in a lawn mower. The purpose of a grease fitting in a lawn mower is to allow the lubrication of one or more components within the internal machinery of the lawn mower while regulating the amount of lubricant and ensuring that no overflowing or leaking occurs.The grease fitting in a lawn mower might need to be replaced if the grease fitting fails to prevent leakages or overflowing or if the grease fitting can no longer channel and facilitate the lubrication process. This could occur if the grease fitting is damaged to the point of reduced or no functionality or if the grease fitting is lost or misplaced, in which case it should be replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This grease fitting is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, Murray, Ariens, and Dixon.

This replacement part is a bushing outlet and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is small but very important to the overall operation of many different types of machines and power appliances. Bushings help connect two different pieces of equipment and often aid in helping them work together as well as minimize friction and heat during use.A new bushing outlet might be needed if the current one is visibly damaged or missing. Because of where this part is situated it is possible for the bushing to become stripped or damaged overtime and it is not unusually replaced. If there are parts of the machine that are creating unusual noises, it might be time to replace the bushing. This bushing outlet is a genuine OEM replacement part. This part is sold individually and is sourced from the manufacturer.

This battery cable is a genuine Husqvarna part, sold individually. A battery cable can be used as a replacement part in a lawn mower or a tiller. This genuine OEM part, built for one of these outdoor appliances, is made out of high quality, durable material.The battery cable in a lawn mower or a tiller might require eventual replacement if it shows clear signs of damage at any point during the typical lifespan of the appliance. The battery cable can be frayed, torn, ripped, scraped, scratched, warped, or eroded. If this occurs, the battery cable should be removed and replaced by this genuine OEM replacement part in accordance with the proper instructions in a relevant appliance manual.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This battery cable is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

Here is a replacement thrust washer that can be used in lawn mowers. A thrust washer is a type of flat washer that is used between a stationary component and a surface that rotates, and they are used for a range of applications, not just for engines. The thrust washer is made from metal and it is durable. However, there may be a time when one or more thrust washers need to be replaced. This might be due to corrosion or damage to the washer. It could also result from the thrust washer becoming lost when the owner is working on the machine. Many buyers will choose to purchase several thrust washers at once so they can have them on hand if they need them in the future. The genuine OEM replacement thrust washer is sold individually. This washer can be used in various models of lawn mower and lawn tractor. It is compatible with more than 150 models. Compatible brands include Craftsman, Husqvarna, Weed Eater, Poulan, Murray, and Ariens.

This fuel line is a genuine Husqvarna part, sold individually. This fuel line can be used as a replacement part for a lawnmower. This fuel line for a lawnmower provides a path for fuel pass through in order to reach the fuel tank.The fuel line might have to be replaced at some point within the standard lifespan of the appliance if it is severed in some way that prevents the fuel from reaching the fuel tank or that leads to fuel leakages. If there is fuel leaking from the area of the fuel line or if the fuel line has been frayed, severed, punctured, or torn, the component should be removed and replaced by this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This fuel line is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Craftsman.

This shift arm knob can be used with many lawnmowers and lawn tractors from various major lawn and garden manufacturers. It is used to grasp the shift lever to change gears and engage the mower. The shift arm knob makes it more comfortable to use the shift lever. Without the knob, the lever would be slippery and hard to hold with bare hands.It is made of heavy-duty plastic that can fade and crack due to the elements. Installing the replacement shift arm knob does not require tools and can be complete in under five minutes. The shift arm knob is a threaded ball that screws onto the shift lever. To remove, turn the ball counterclockwise until it comes off the shift lever. Line the new knob up with the shift lever and turn clockwise to screw on. Hand-tighten the lever. Do not over-tighten as this could could strip the threads. This shift arm knob is a genuine OEM replacement part sourced directly from the manufacturer. It is sold as an individual unit. This knob is designed for use in lawnmowers and lawn tractors manufactured by Ariens, Craftsman, Husqvarna, and Poulan.

This tire is a genuine Husqvarna part, sold individually. This tire can be used as a replacement part for a lawn mower or a lawn tractor.The tire for a lawn mower or a lawn tractor might eventually have to be replaced if it shows signs of damages that cannot be fixed by a basic repair. If the tire has been damaged, it should be removed and replaced with this genuine OEM replacement part before using the appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This tire is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Weed Eater, and Craftsman.

This is a flat idler pulley, which is also called a blade idler pulley. The purpose of this pulley is to apply tension to the blade belt. This is what allows the belt to turn and the blades to function properly on the lawn tractor. If the pulley is damaged or breaks, the tractor's blades will not be able to turn, and they will not cut.The metal pulley is durable, but over time, it could need to be replaced. In some cases, it might break during the use of the tractor. It could also wear down or corrode. Owners will need to replace the pulley as soon as possible, so they can get their tractor functioning correctly again. this project is relatively easy and will require a 9/16-inch socket.This flat idler pulley will work for certain tractor models from the brands Jonsered, Husqvarna, Poulan, and Weed Eater. This part is sold individually. It is a genuine OEM replacement part that has been sourced directly from the manufacturer.

This spring is a torsion spring. It is a genuine Husqvarna part. It is a replacement part for lawn mowers, lawn tractors, and riding mowers. On these machines, the torsion spring is part of the pivot bracket. It helps keep the shift rod in the right position.The torsion spring also creates tension and torque. Without it, the mower will not operate correctly. Before starting this repair, be sure the engine is completely cool and disconnect the spark plug to prevent accidental starting.This spring or torsion spring is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. It is designed to be compatible with equipment made by Husqvarna, Poulan, Weed Eater, and Craftsman. It also replaces obsolete part number 123782X.