Hdi7282u3 Parts

The Hinge is an OEM part for Bosch ranges. It is responsible for securely holding the oven door in place while allowing for easy opening and closing.  

Causes of a bad hinge can include wear and tear over time, damage due to repeated use or impact, or failure of internal mechanisms that assist in smooth movement.  

Symptoms of a bad hinge include:

• The oven door becoming loose or unstable
• Difficulty in fully opening or closing the door  
• Door alignment issues where the door does not sit flush
• Visible damage or cracks in the window or frame

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This is a single mounting screw used to secure panels and internal components on Bosch appliances. Replacing a missing or damaged screw helps restore a snug, rattle-free fit and keeps parts aligned. What it does

• Secures trim, panels, brackets or small assemblies to the appliance frame
• Prevents vibration and rattling caused by loose fasteners
• Restores proper alignment when a stripped, corroded or missing screw causes gaps
• Simple, low-cost part to maintain safe, stable component attachment

• One mounting screw

• Turn power off and unplug appliance before accessing internal panels
• Use the correct driver and apply firm, controlled torque; avoid overtightening to prevent stripped threads

This clamp secures flexible hoses and small tubes to fittings, keeping connections tight to help prevent leaks and movement. It's a small replacement clip used on water and drain lines in many appliances. What it does

• Holds a hose or tube firmly to a barb or nipple to maintain a sealed connection
• Helps stop leaks caused by loose or damaged hose connections
• Prevents hoses from slipping off during operation and reduces vibration noise
• Used wherever a small retaining clamp is required on water or drain lines

• One clamp

• Turn off power and shut off water supply before replacing the clamp
• Slide clamp over the hose, push hose fully onto the fitting, then compress or tighten clamp as required
• Use pliers or the correct tool for the clamp type; avoid damaging the hose when installing
• Replace if corroded, cracked, or not seating properly

This inner door lining kit replaces a damaged or worn dishwasher inner door panel to restore the door's interior finish and help maintain proper door function. It provides the correct mounting surface for internal components and helps keep insulation and wiring protected. What it does:

• Replaces a cracked, dented, or corroded inner door panel to restore the door's structural integrity
• Protects internal insulation, wiring, and components from moisture and contaminants
• Helps reduce interior rattles or noise caused by a loose or damaged liner
• Restores a smooth, clean interior surface for normal dishwasher operation

• Disconnect power and water supply before beginning any repair
• Remove the door from the appliance and lay it on a padded work surface to access the inner panel
• Handle panel edges carefully; use recommended fasteners and OEM instructions for reassembly

This wire shelf provides a stable, ventilated storage surface inside the refrigerator to organize food and improve airflow for even cooling. It replaces a damaged, bent or missing shelf to restore usable interior storage space. What it does:

• Replaces a bent, rusted or broken refrigerator wire shelf that no longer supports items safely
• Restores flat, secure storage for food containers, bottles and produce
• Helps maintain proper air circulation in the compartment for more consistent cooling
• Fits into existing shelf tracks or supports designed for factory wire shelves

• One replacement wire shelf

• Slide shelf into existing tracks/supports; no tools typically required for drop-in style shelves
• Handle carefully to avoid sharp wire ends; wear gloves if needed
• Only replace with the correct part number for secure fit and safe operation

This insulating part provides electrical and thermal isolation for internal appliance components, helping prevent shorting and reducing heat transfer where wiring or terminals meet sensitive parts. Use it to restore safe operation after damage or wear. What it does:

• Provides electrical insulation for terminals, connectors, or wiring to prevent shorts and arcing
• Reduces heat transfer between hot components and nearby wiring or plastic parts
• Helps maintain safe clearances and protects against chafing or contact-related failures
• Commonly replaced when cracked, melted, burned, or otherwise compromised

• One insulating part

• Always disconnect power (unplug appliance or switch off breaker) before servicing
• Verify correct orientation and seating; do not force the part into place
• Inspect surrounding wiring and terminals; replace any damaged connectors or wires

A replacement storage drawer that restores usable under-appliance or interior storage space and smooth sliding operation. Replaces damaged, cracked, or worn drawers to keep stored items safe and accessible. What it does:

• Provides a removable tray for storing cookware, utensils, or food items depending on the appliance configuration
• Restores smooth in-and-out sliding action when original drawer was broken or warped
• Keeps contents secured and organized to prevent shifting during use
• Helps maintain appliance appearance by replacing a damaged or discolored drawer

• One replacement drawer assembly

• Disconnect power to the appliance before servicing to reduce shock risk
• Remove any contents and slide out the old drawer; note rail alignment for reassembly
• Align the replacement drawer on the guides or rollers and slide in until it seats; secure any screws or clips removed
• Test full travel and closure; do not force if resistance is felt—recheck alignment

This replacement sleeve is a small protective bushing that fits over a rotating shaft to reduce wear and prevent metal-to-metal contact. It helps preserve surrounding seals and components for longer, reliable operation. What it does

• Provides a wear surface between a rotating shaft and stationary parts
• Reduces friction and helps prevent premature wear on seals and bearings
• Can help reduce rubbing noise or vibration caused by a damaged sleeve
• Restores correct spacing and alignment where a worn sleeve allowed excess play

• One sleeve

• Disconnect power and, if applicable, water before beginning any repair
• Requires partial disassembly of the appliance; keep track of fasteners and parts
• Inspect adjacent seals, bushings, and shafts and replace if worn

This glass front panel is the exterior replacement glass that restores the appliance's finished look and protects the underlying door and control area from scratches and wear. It fits into the door assembly to provide a clean, glossy surface. What it does:

• Replaces cracked, chipped, or heavily scratched front/door glass to restore appearance
• Protects internal components and trim from direct contact and debris
• Helps keep the door surface smooth and easy to clean
• Restores a secure fit when broken or loose glass affects the door finish

• One glass front panel

• Disconnect power to the appliance before starting any repair
• Handle glass with gloves and protective eyewear to avoid cuts
• Installation typically requires removing the door trim or bezel—follow the OEM service instructions for your model