Hdwc35-Everstar Parts

The Control Label Overlay is an OEM part for Bosch range hoods. It is the interface label for the range hood's control panel, featuring clear markings for each function, from fan speed adjustments to light settings.

Causes of a bad Control Label Overlay can include exposure to heat and moisture, which can lead to the overlay peeling or the labels fading. 

Symptoms of a bad Control Label Overlay include:

• Difficulty in identifying control functions due to faded or worn labels
• Peeling or damaged overlay that compromises usability and appearance
• The need to guess or remember control locations due to obscured labels

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This control panel is the exterior fascia at the top of the dishwasher door. It provides the labeled surface for the user controls and restores proper button access and appearance when the original is cracked, broken, or worn.

• Serves as the door-mounted fascia for the dishwasher's user controls
• Provides the labeled button layout and covers/protects the control area
• Replaces cracked, loose, or broken panels that can make buttons difficult to press
• Refreshes worn graphics and scuffed or faded appearance

• Disconnect power at the circuit breaker before servicing
• Open the door and remove the screws securing the console/inner door to release the panel
• Support the panel; transfer any handle/trim and the existing switch/control components as required
• Reinstall, align, and secure screws; restore power and verify button operation

Keep your appliance's controls working reliably with this switch cover. It mounts over a switch to hold it in place and shield it from damage, helping ensure consistent actuation and long service life.

• Retains and protects a control/interlock switch within its housing
• Helps keep the switch aligned for reliable on/off detection
• Shields the switch from dust and incidental contact
• Cracked, loose, or missing cover can cause intermittent operation or no response when the control is pressed

• Disconnect power to the appliance before servicing
• Remove the necessary panel to access the switch; note wire positions/orientation
• Transfer any clips/screws from the old cover and seat the switch fully
• Secure wiring away from pinch points before reassembly

This grease filter is a genuine Bosch part, sold individually. This grease filter can be used as a replacement part for a range vent hood. This part prevents the accumulation and buildup of external grease in the internal aspects of the range vent hood. A grease filter can be subject to damage within the lifespan of a range vent hood. This damage can manifest in the form of punctures, scrapes, nicks, tears, and erosion to the material that can allow external grease to slip into the range vent hood and gunk up its inner workings. A grease filter might become damaged from general wear and tear or due to a collision with a hard object that warps the component beyond functionality. If this occurs, the grease filter should be removed and replaced with this genuine OEM replacement part. It is a simple replacement process that will require no special tools.This is an OEM part sourced directly from the manufacturer. It is sold individually. This grease filter is compatible with the following appliance brands: Bosch and Thermador.

This replacement cover fits over the appliance's light housing. It shields the bulb and wiring from grease and moisture while helping keep the lamp assembly secure, restoring safe, consistent illumination. What it does:

• Covers and protects the light housing and bulb from heat, grease, and moisture
• Helps secure the lamp support/assembly in place
• Maintains proper light output and appearance
• Common symptoms include a cracked or missing cover, exposed bulb, loose light assembly, or discoloration around the light opening

• 1 lamp support cover

• Disconnect power to the appliance before servicing and allow the area to cool
• Remove the old cover and retain any original fasteners or clips
• Align and seat the new cover fully; avoid overtightening fasteners
• Restore power and test the light for proper operation

This 12V halogen lamp restores interior illumination in compatible appliances so you can clearly see contents and monitor cooking. It replaces a dim or burned-out lamp to bring back bright, focused light where needed. What it does:

• Provides interior lighting for compatible ovens, ranges, or appliance compartments that use a 12V halogen bulb
• Replaces a dim, flickering, or non-working lamp to restore visibility
• Produces focused, high-contrast light useful for checking food and operation status
• Designed for direct replacement where a 12V halogen lamp is specified by the appliance

• One 12V halogen lamp

• Always disconnect power and allow the appliance to cool before replacing the lamp
• Avoid touching the glass with bare fingers; use gloves or a clean cloth to prevent oils that can shorten bulb life
• Follow your appliance owner's manual or service instructions for access and replacement steps

This fixing kit provides the mounting hardware needed to secure the related appliance assembly so parts stay properly positioned during operation. It's a small hardware package used when replacing or repairing the matched component. What it does:

• Provides the fasteners and small brackets that secure the associated assembly in place
• Restores proper fit and alignment to prevent rattling, misalignment, or loose components
• Used during part replacement or reassembly after service
• Compatible with the specific Bosch assembly it was designed to work with

• Intended for use by an experienced DIYer familiar with appliance disassembly
• Turn off power and water to the appliance before starting work
• Retain original fasteners and compare parts before discard to ensure correct fit

This duct lower cover replaces the lower vent/duct trim that protects internal components and helps direct airflow. It restores proper enclosure of the appliance's lower duct area for safe, tidy operation. What it does:

• Covers the lower duct opening to help keep debris and pests out of the duct area
• Protects wiring and components near the bottom duct from accidental contact
• Helps maintain intended airflow routing through the appliance's duct path
• Restores a finished appearance to the appliance's lower exterior

• One duct lower cover

• Disconnect power to the appliance before starting any work
• Handle edges carefully; use hand protection to avoid sharp sheet-metal edges
• Retain any original fasteners for reassembly; replace damaged clips or screws as needed

This fan drum is the rotating blower wheel that moves air through the appliance for proper ventilation and drying performance. It replaces a worn or damaged wheel to restore airflow and reduce noise from imbalanced rotation. What it does:

• Spins to circulate air through the appliance's air path and heat exchanger.
• Helps maintain consistent drying or cooling by directing airflow where needed.
• A worn, cracked, or broken drum can cause unusual vibration, rattling, or reduced airflow.
• Replacing a damaged drum often resolves airflow restrictions and excessive blower noise.

• One fan drum

• Disconnect power before accessing internal panels; follow OEM disassembly instructions.
• Inspect surrounding seals, bearings, and mounting hardware; replace any damaged components for best results.
• Handle edges carefully to avoid bending blades; ensure proper seating on the motor shaft during reassembly.

A 3.15 amp glass cartridge fuse that protects appliance circuitry by interrupting power when a fault or overload occurs. Keeps control boards and components from damage by stopping dangerous current flow. What it does:

• Protects electrical circuits by blowing when current exceeds 3.15 amps
• Prevents further damage from short circuits or component failures
• Commonly used in control panels, electronic modules, and power boards
• Symptom: appliance won't power on or certain functions are unresponsive when the fuse is blown

• Disconnect the appliance from power before inspecting or replacing the fuse
• Replace only with a fuse of the same type, size (5 x 20 mm) and rating (3.15 A)
• Handle the glass tube carefully to avoid breaking; ensure proper seating in the fuse holder
• If a new fuse blows immediately, stop and diagnose the underlying electrical fault.