Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix an oven not reaching temperature or showing error codes during preheat. This temperature sensor monitors interior heat for accurate baking. 5-15 min DIY.
(1) Unplugged oven. (2) Removed rear panel & unplugged temperature sensor. (3) From inside oven, removed 2 screws holding sensor & pulled sensor out. (4) Installed new sensor by performing steps 1 thru 3 in reverse order. Read more
Replace your worn oven door gasket to restore a tight seal, prevent heat loss, and maintain consistent baking temperatures. Confirm fit with your model number.
After watching your great video showing how to install, we ordered the product from you. Great service and an easy install!!! Thanks so much!! Read more
Fix inaccurate oven temperatures or probe errors with this temperature sensor. Monitors internal food temp for precise cooking. Moderate DIY repair.
Replaced Read more
Fix a broken burner switch shaft or unresponsive element control. This range burner switch restores reliable heat adjustment. DIY repair in 30 minutes.
It took about 30 minutes (including the time it took to clean up the junk that had accumulated over the months under the range floor). Easy to do. Just removed about 12-odd screws in order to remove the cosmetic plates/covers the covers, etc., to access the unit, took off one wire at a time from the old unit and connected it to the new unit, then put everything back. Required both Phillips head screwdriver and star bits (for 4 of the screws). Read more
Oven not reaching temperature or heating slowly? This convection heating element restores proper heat generation. 10-minute DIY repair with basic tools.
Diagnosed the system using schematic on back of oven. With power ON (BE VERY CAREFUL - VERY DANGEROUS). Relay board was working - was providing 220VAC to Main Bake Element and Convection Element - even during pre-heat. Temp would not to past 400 - and temp would drop when oven door was opened. With Power OFF - disconnected one of the power leads to the bake element to properly measure its resistance - approx.. 20-25 ohms DC resistance - Element OK. Replace lead to Bake Element. ... Read more
Restore oven visibility with this complete light assembly. Replace when bulb won't light, lens is cracked, or socket is damaged. Verify fit with your model.
We ordered a new one from Appliance Parts Pros.com and it came within a few days. My husband had no problem with installation of it. Thank you for your promptness with this item. A Sincere Thank You, Bev and Dick Read more
Oven not heating or losing power? A cracked or damaged terminal block disrupts electrical connections. This straightforward repair restores safe operation.
Removed and replace Read more
Leveling foot for electric and gas ranges. Adjustable metal foot installs at base corner. Replace if cracked, broken, or missing to level your range.
Burner not heating or taking too long to boil water? This heating element assembly restores proper temperature output. Common fix for cooktops and ranges.
Fix intermittent power or component failure with this range socket electrical connector. Restores secure wiring connections in electric and gas ranges.
Cracked, loose, or faded selector knob making it hard to switch oven functions? This range selector knob restores reliable control and clear settings.
Restore even baking when your oven heats unevenly. This convection fan blade circulates hot air for consistent cooking. Moderate DIY install.
Oven won't heat or reach proper temperature? This heating element restores heat generation. DIY repair takes about 30 minutes with basic tools.
Pulled range out. Unplugged unit. Removed four phillips head screws. Unplugged two wires from element. Opened range door and removed two phillips head screws from back of range that held element. Removed two phillips head screws from range ceiling that held the element up. Installed new element with the four screws and replaced the two wires to the element in the back of range and replaced screws, slid range back in place and turned the range on to burn off element and started cooking. Read more
Replacement mounting nut for securing internal oven and range components. Needed when original fastener is stripped, missing, or damaged during repair work.
Replacement pan grille trim for lawn tractors. Covers and ventilates the pan opening while protecting against debris. Restores appearance when original is cracked, broken, or missing.
Replace your worn or broken range door hinge to restore proper door alignment and smooth operation. This hinge pivots and supports the oven door.