Hmc801252 Parts

This replacement support is the small bracket that holds and positions its mating component so it stays aligned and operates smoothly. Replacing a cracked or missing support restores proper fit, reduces rattling, and helps prevent premature wear. What it does:

• Secures an attached part in the correct position
• Maintains alignment and spacing to prevent rubbing or binding
• Helps reduce vibration, looseness, and noise from misaligned components
• Typical signs of failure: broken tabs, missing piece, loose or sagging part

• 1 support

• Disconnect power; shut off water supply if applicable
• Note the original orientation and location before removal; install the new support the same way
• Handle sharp panels and delicate plastic tabs with care to avoid damage
• Verify smooth operation of the supported component after reassembly

This replacement drive motor powers the wash drum in your machine, supplying the torque needed to tumble clothing and complete cycles under load. Replace a weak, seized, or noisy motor to restore smooth, reliable drum movement.

• Drives the drum/tub during wash and rinse cycles
• Common failure signs: drum won't turn/tumble or stops mid-cycle
• May hum, overheat, or emit a burning smell when failing
• Starts then stalls or trips the breaker on startup
• Some models may show a motor/drive-related error code

• Disconnect power before servicing; allow moving parts to stop completely
• Access the motor per your model (rear or bottom panel on most units)
• Label and disconnect wiring, remove mounting hardware, swap in the new motor
• Reassemble, ensure smooth drum rotation by hand, then run a test cycle

This light socket holds the appliance bulb and provides a secure electrical connection, restoring reliable interior lighting. Replace a cracked, heat-damaged, or loose socket to fix lights that don't come on even with a good bulb.

• Provides the electrical contacts and mechanical support for the light bulb
• Helps resolve no-light or intermittent flicker when the bulb and switch are OK
• Common failure signs: discoloration, melting, burn marks, or loose/broken contacts
• Restores dependable illumination in the designated lighting location

• Disconnect power at the breaker and allow the appliance to cool before servicing
• Wear cut-resistant gloves and eye protection; handle bulbs by the base, not the glass
• Note wire positions and transfer connectors one at a time to the new socket
• Seat the bulb fully and test operation before reinstalling any covers or panels

This high-voltage transformer steps household power up to energize the magnetron, enabling proper heating in your microwave. Replace it if the unit powers on but doesn't heat, hums loudly, or intermittently blows a fuse.

• Supplies the high voltage needed for magnetron operation
• Common symptoms when failing: runs but no heat
• May cause loud humming, burning odor, or tripped breaker/fuse
• Visible overheating or damage on the transformer can indicate failure

• Unplug the appliance; the high-voltage capacitor can retain a dangerous charge
• Document wire locations and transformer orientation before removal
• Reuse original mounting hardware/brackets and secure all connections firmly

This replacement lamp is the light bulb used in select Bosch appliances. It restores clear visibility during normal operation, helping you see inside the unit or work area whenever the light is activated. What it does:

• Provides illumination when the door opens or the light switch is turned on
• Replaces a burned-out, dim, or broken bulb
• Common symptoms include: light does not turn on, flickers, or works intermittently
• Visible clues may include a darkened glass envelope or broken filament

• 1 lamp

• Disconnect power to the appliance before servicing; allow the bulb and surrounding area to cool
• Access the light assembly and remove the lens/cover as directed in your model's instructions
• Remove the old bulb and install the new lamp without forcing; reinstall the cover securely
• Restore power and test operation; use only the bulb type and wattage specified for your model

The Thermistor is an OEM part for Bosch microwaves. This part is responsible for monitoring and regulating the temperature inside the microwave cavity during operation. It measures the temperature and sends signals to the control board, allowing the microwave to adjust its power output accordingly.

A bad thermistor can occur due to damage, electrical malfunctions, or temperature sensor failure. Signs of a faulty thermistor include inconsistent heating, overcooked or undercooked food, or error messages displayed on the microwave's control panel.

Symptoms of a bad thermistor include:

• Inconsistent heating  
• Error messages displayed

Replace your malfunctioning or damaged microwave thermistor with this genuine OEM Bosch part to restore your microwave. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Frequency Filter is an OEM replacement part for Bosch microwave ovens. Located inside the control panel casing, it prevents electromagnetic interference between electronic circuits. The frequency filter ensures precise cooking settings by filtering out radio waves and high-frequency noise.

Symptoms of a faulty frequency filter include:

• Settings appearing arbitrarily changed or unresponsive  
• Error codes signaling control malfunctions
• Microwave failing to heat or function as anticipated
• Buzzing, crackling, or whining noises emitting from inside

Causes of a bad frequency filter typically involve failures over extended usage. Repeated filtering can degrade or displace sensitive parts interfering with operations. 

Replacing your frequency filter restores reliable cooking and cabinet protection. This genuine Bosch component prevents future issues. Compatible with Thermador, Gaggenau, and select Kenmore microwaves.

This facia panel is the front console cover for the unit's user interface. Replacing a cracked or worn panel restores a clean appearance and provides proper support and alignment for the controls.

• Covers the control console where cycles and options are selected
• Provides mounting structure for the user interface components
• Helps shield internal components from incidental moisture and debris
• Common signs of failure: visible cracks, broken tabs/clips, panel won't stay secured, controls feel loose or misaligned

• Disconnect power to the appliance; turn off the water supply
• Open the console/door and remove the fasteners securing the existing facia
• Transfer any brackets, seals, or trim from the old panel to the new one
• Reinstall, check control alignment, and avoid overtightening fasteners

This replacement oven interior lamp provides bright, direct illumination so you can check cooking progress without opening the door. It restores a working oven light when the original bulb is burned out or dim. What it does

• Replaces the oven interior light to improve visibility while cooking.
• Commonly used when the oven light is dark, flickering, or fails to turn on.
• Helps you monitor food without opening the oven door and losing heat.
• Matches the original lamp's fit and function when the part number matches.

• One oven interior lamp.

• Disconnect power to the appliance before replacing the lamp to avoid electrical shock.
• Allow the oven to cool completely before changing the bulb; use gloves or a cloth when handling.
• Remove any protective cover or lens per your owner's manual; replace lamp and reattach cover securely.

The Pin is an OEM part for Bosch wall ovens and microwaves. It is part of the latch which holds the door.

Causes can be normal wear and tear over time, deformation from repeated use, or damage due to excessive force on the door.

Symptoms of a bad oven door pin include:

• The door not latching or locking into place fully
• Looseness or play in the door latching mechanism
• The door able to open partially during a cooking cycle
• Difficulty closing or locking the oven door securely

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Latch is an OEM part for Bosch microwaves. It secures the microwave door safely closed during cooking cycles.

Causes of a bad latch can include wear and tear resulting from repeated opening and closing of the microwave door over time. Normal operation puts stress on internal latch mechanisms that can compromise function.

Symptoms of a bad latch include:

• Food or debris buildup on the door seal or surrounding area.
• Steam or burnt residue inside areas that should remain sealed and clean.
• The door popping or shaking loose from the sealed position during a cooking cycle.

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This replacement seal restores a tight, leak-resistant connection within the specified assembly of your appliance. Replacing a worn or damaged gasket helps stop drips and moisture intrusion so the unit runs reliably without leak-related issues.

• Creates a watertight/airtight barrier between mating parts
• Helps prevent leaks and moisture damage around the affected joint
• Replace if the original shows cracking, flattening, hardening, or tears
• Can help address water under/around the unit or dampness at a connection point

• Disconnect power and shut off water supply before servicing
• Note the original seal's orientation and seating depth for correct placement
• Clean the groove and mating surfaces; remove residue and scale to ensure a proper fit
• Seat the new seal evenly; avoid overtightening fasteners; test for leaks after reassembly

This replacement turntable tray supports your dishes and rotates during cooking to promote even, consistent heating. Replace a cracked, missing, or unstable tray to restore smooth rotation and a safe, level surface for everyday use. What it does:

• Provides a stable surface for cookware inside the microwave
• Engages the center drive hub and roller ring to rotate food for even cooking
• Replace if cracked, chipped, wobbly, or not engaging the hub properly
• Common symptoms: uneven heating, tray won't rotate, rattling, or the plate slipping off center
• If rotation still fails, inspect the roller ring, drive coupler, or turntable motor

• 1 turntable tray

• Disconnect power before servicing
• Remove the old tray; clean debris from the center hub and support/roller ring
• Seat the new tray on the center coupling; ensure it rests on the ring and turns freely
• Do not operate the microwave without the turntable properly installed

This plastic-foil capacitor is used in the appliance's electrical circuit to provide stable capacitance. It supports proper motor and power-circuit operation, helping components start and run smoothly while minimizing electrical noise. What it does:

• Stores and releases electrical energy to support motor starting/running or stabilize the power circuit
• Helps reduce electrical noise and voltage spikes in the system
• A failing capacitor can cause hard starting, humming, weak or intermittent operation, or tripped breakers
• Visible bulging, cracks, or heat damage on the capacitor indicates replacement is needed

• 1 capacitor

• Disconnect power at the breaker before servicing; verify no power is present
• Capacitors can retain a charge—discharge safely using appropriate tools and procedures
• Note wire positions and terminal orientation; transfer one lead at a time or take a reference photo
• Mount securely and keep wiring clear of sharp edges, heat sources, and moving parts

This replacement grid restores a stable, properly fitting surface in your appliance. It supports items and allows airflow or drainage as designed, helping maintain safe, reliable performance.

• Provides a rigid, open-grid surface for support and spacing
• Helps maintain proper airflow or drainage through the area
• Replace if bent, cracked, missing, or excessively worn
• Common signs include poor fit, wobbling, tipping items, or visible damage

• Disconnect power and, if applicable, shut off gas/water before service
• Allow all hot surfaces to cool completely
• Remove the old grid and clean the seating/mating points
• Set the new grid securely in place and verify a stable, level fit

This replacement screw secures appliance panels and components at their mounting points. Swap in a new screw to restore a tight, rattle-free fit when the original fastener is missing, stripped, or corroded.

• Fastens the designated panel, bracket, or component in place
• Replaces a missing, stripped, or rusted screw
• Helps address loose panels, gaps, rattling, or misalignment at the mounting point
• Maintains proper assembly integrity after service or vibration

• Disconnect power; shut off water supply if working near plumbing
• Match to the removed fastener and replace one at a time to preserve alignment
• Start threads by hand to avoid cross-threading; use the correct driver bit
• Tighten snugly and avoid overtightening, especially into plastic or thin sheet metal