Hvm154olm1cs Parts

Replacement mounting bracket that secures internal panels or components to the appliance frame, restoring alignment and stability. Use this bracket to replace cracked, bent, or missing supports that cause vibration or loose parts. What it does:

• Supports and secures panels, trim, or internal assemblies to keep components properly aligned.
• Reduces rattling, sagging, or movement caused by a broken or missing bracket.
• Restores stable mounting after impact, wear, or stripped mounting points.
• Helps maintain proper fit and operation of adjacent parts by providing a solid attachment point.

• Disconnect power (and water/gas if applicable) before starting any repair.
• Basic hand tools required; remove adjacent panels or trim for access as needed.
• Retain original fasteners when possible; replace damaged clips or screws.

This cover-damper is the replacement plastic cover that fits over the refrigerator air damper to help direct cold air between compartments for more consistent cooling. Replaces a cracked, broken or missing damper cover. What it does:

• Protects the damper assembly and helps channel airflow from the evaporator to the fresh-food and freezer compartments
• Restores proper air direction when a broken cover causes uneven temperatures or poor cooling
• Works with the damper to reduce drafts and improve compartment temperature balance
• Simple, passive part that mounts to the damper housing

• One cover-damper

• Disconnect power to the appliance before starting any repair
• Remove interior panels or shelves as needed to access the damper housing; handle plastic clips gently to avoid breakage
• Verify fit and orientation against the existing part before finalizing installation
• If the damper motor or actuator is damaged or the issue persists after installing this cover, inspect the full damper assembly

This thermostat regulates oven temperature to help maintain consistent cooking results and prevent under- or over-heating. It replaces a failed temperature control component to restore accurate oven cycles. What it does:

• Senses oven temperature and signals the control to cycle the heating element or burner
• Helps correct symptoms like oven not reaching set temperature or running too hot/too cold
• Works with the oven's control system to maintain stable cooking temperatures
• Functions as the temperature-sensing switch for bake/oven operation

• Disconnect power to the appliance before servicing to avoid shock or injury
• Handle the thermostat and sensing bulb carefully; avoid kinking or damaging the capillary tube if present
• Mount and secure per the OEM layout; confirm correct orientation and probe placement for accurate sensing

This lamp drawing is the appliance lighting assembly that provides interior illumination for safe visibility and operation. It restores proper lighting so you can check contents and settings without opening the appliance in the dark. What it does

• Houses and positions the interior lamp to produce even light where needed.
• Connects to the appliance wiring to deliver power to the lamp.
• Commonly replaces assemblies that are cracked, broken, loose, or no longer illuminating.
• Resolve symptoms such as dim, flickering, or non-working interior lights.

• One lamp drawing lighting assembly.

• Always disconnect power (unplug or shut off breaker) before accessing electrical components.
• Handle lamp sockets and wiring gently to avoid damage; replace bulbs per manufacturer specifications.
• Verify fit and connector type before installation.

This washered screw secures panels and internal components where a combined screw-and-washer fastener is required, restoring proper fit and stopping movement or rattling. Simple replacement with the correct fastener keeps assemblies aligned and stable. What it does

• Secures panels, brackets or components where a washered screw is specified
• Replaces missing, stripped or corroded fasteners that allow vibration or gaps
• Helps stop rattling, loose panels or misaligned parts caused by a failed screw
• Provides a sealed bearing surface to distribute load and prevent pull-through

• One washered screw

• Disconnect power and/or water to the appliance before starting any repair
• Use the correct screwdriver or bit to avoid cam-out and fastener damage
• Align parts before tightening and snug; avoid over-tightening which can strip threads or crack plastic

This metal bracket supports and secures the range/oven control panel so buttons and display stay aligned and stable during use. It restores a solid mount and correct panel fit for safe, reliable operation. What it does:

• Secures the control panel to the console so switches and display remain properly aligned
• Prevents the control panel from sagging, rattling, or shifting when using controls or cleaning
• Restores correct spacing and fit for front-facing controls and trim
• Helps eliminate intermittent contact issues caused by a loose panel

• One control panel bracket

• Disconnect power at the breaker before starting any work
• Basic hand tools (screwdriver/socket) are typically required; avoid force when removing trim
• Keep track of screws and clips—reinstall in original locations to ensure proper fit

This is a binding-head screw used to fasten panels and components on compatible GE appliances. It provides secure, low-profile fastening where a binding head design is required for proper fit and alignment. What it does

• Secures panels, brackets, or small assemblies to prevent movement or rattling.
• Replaces a missing or stripped screw that causes loose parts or squeaks.
• Restores proper alignment for components that rely on the binding-head profile.
• Works where a shallow, rounded head and threaded shaft are specified.

• Use the correct driver size to avoid cam-out or head damage.
• Do not overtighten; snug until secure to avoid stripping threads or damaging parts.
• Disconnect power and follow all appliance-specific safety procedures before accessing panels.

A replacement auxiliary burner holder for gas/electric cooktops that secures the small heating element or burner cap for stable, even cooking. Restores proper support and alignment for auxiliary burners. What it does:

• Holds and centers the auxiliary burner or element cap on the cooktop for reliable heat contact
• Helps prevent burner wobble, misalignment, and uneven heating
• Supports safe, consistent pan placement on the auxiliary cooking zone
• Fits into the cooktop assembly where the auxiliary burner is mounted

• One auxiliary burner holder (1 count)

• Basic part; remove burner cap/element and replace holder per appliance disassembly steps
• Turn off power and/or gas and disconnect the appliance before beginning work
• Handle porcelain-coated parts carefully to avoid chipping; avoid overtightening fasteners

The Handle Assembly is an OEM part for GE microwaves. It is used to provide a secure grip for opening and closing the microwave door, ensuring easy and safe access to the microwave interior.

You should replace this handle assembly if it becomes damaged or worn out. Common causes of a bad handle assembly include repeated use leading to wear and tear, accidental impact causing cracks or breaks, or exposure to high heat that can weaken the material.

Symptoms of a bad handle assembly include:

• Difficulty in opening or closing the microwave door
• The handle feeling loose or wobbly
• Visible cracks or breaks in the handle
• The handle detaching from the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Color: White

This rivet assembly is a direct-replacement fastening piece used to secure appliance panels and components, restoring a stable, rattle-free fit and preventing movement caused by worn or broken rivets. What it does:

• Secures panels, brackets, or component mounts to restore proper alignment and support
• Stops rattling, vibration, or loose hardware caused by damaged or missing rivets
• Provides a durable mechanical fastener where original rivets have sheared or loosened
• Helps maintain safe operation by keeping parts properly retained

• Disconnect power (and gas/water if applicable) before attempting any repairs
• Removal may require drilling out the old rivet; installation typically needs a rivet gun or equivalent tool
• Keep hardware orientation the same as the original; replace any damaged surrounding parts