Ivsr2 Parts

This is an evaporator that is located inside many refrigerators. It has a part to play in ensuring the items inside the appliance stay cold. When the refrigerator turns from a liquid into a gas through evaporation, it cools the area nearby and makes it ideal for storing perishable food items. The evaporator pulls air from the refrigerator and blows it over the coils to keep it at the appropriate temperature. There are several signs that the evaporator is damaged or no longer working correctly. Sometimes it will make a chirping or squealing noise. It may cause the refrigerator to be too warm, which may cause issues with the food items inside. Frost buildup on the coils is also a bad sign. If the evaporator is damaged, it needs to be replaced. Unplug the refrigerator and remove the panel over the evaporator. Remove the clamps to uninstall the part. The new part can be installed in the same place. Make sure to test before use.This evaporator is made to be compatible with Maytag, Whirlpool, KitchenAid, and Kenmore refrigerators. It is directly sourced from the manufacturer and sold on an individual basis. This is an authentic OEM replacement component.

Size: 1/4 lb.

Size: 1/4 inch.

Restore stable storage in your freezer with this replacement wire shelf. It creates a level surface while allowing airflow, helping organize frozen foods. Replace when the original is bent, broken, rusted, missing, or no longer sits level. What it does:

• Provides a sturdy, level surface for items in the freezer compartment
• Helps maintain airflow between packages to support even cooling
• Replaces a bent, broken, rusted, or missing shelf to prevent tipping and spills
• Seats in the factory supports for the designated shelf location per your model's diagram

• 1 wire shelf

• Empty the shelf area and remove bins/obstructions as needed
• Slide the old shelf forward and out of the side supports or clips
• Align and insert the new shelf into the supports until fully seated on both sides
• Handle edges carefully and wear gloves to protect hands

This replacement gasket seals the appliance door to help maintain proper temperature and prevent leaks, keeping the interior efficient and protected. Use it to restore a tight door seal and reduce energy loss from gaps. What it does:

• Forms a secure seal around the door to keep heat or cold inside the appliance
• Prevents water, steam, and air leaks that can cause poor performance or messes
• Helps maintain consistent internal temperature for efficient operation
• Reduces cycling and energy waste caused by a damaged or worn seal

• One replacement gasket

• Disconnect power and empty the appliance before starting any repair
• Inspect the door frame and mounting channel for damage or debris before installing
• Install by seating gasket evenly into the channel or following the OEM mounting clips/adhesive method

This service filter is a disposable inline filter used during appliance servicing to trap debris and protect internal components. It helps flush contaminants so systems run cleaner after repair or maintenance. What it does:

• Captures rust, scale and particulate debris during service or line flushing
• Protects valves, pumps and valves from clogging caused by contaminants
• Helps restore proper water/ice flow and reduces service-related blockages
• Used as a temporary/replaceable filter during diagnostic or repair procedures

• Turn off power and water supply before installing or removing the filter
• Install inline according to service procedure and flow-direction marking
• Replace after heavy contamination; do not reuse disposable filters
• Dispose of used filter and trapped debris according to local regulations

A replacement service trim lamp assembly that restores interior lighting so you can safely see and use the appliance during operation and maintenance. Fits the listed part number and ships as a single lamp assembly. What it does:

• Provides interior/trim lighting where factory trim lamps are used
• Replaces a burned-out, dim, or flickering lamp to restore usable illumination
• Helps when the light does not turn on or only works intermittently
• Intended for service/repair use in compatible appliances

• Always disconnect power to the appliance before beginning any repair
• Allow the appliance and existing lamp to cool before handling
• Use basic hand tools and handle the lamp carefully to avoid breaking the bulb or touching glass with bare hands

This wafer head screw secures panels, brackets, and other components inside your appliance. Replacing worn or missing hardware restores a tight fit, reduces vibration and rattles, and keeps assemblies properly aligned for reliable performance.

• Fastens panels, brackets, or trim with a low-profile wafer head for even clamping
• Replaces stripped, corroded, or missing hardware (#8 x 3/8)
• Helps maintain alignment and reduce vibration or rattling noises
• Restores secure mounting for safe, stable operation

• Disconnect power; also shut off gas before servicing
• Support the panel or component while removing/installing hardware
• Hand-start threads to avoid cross-threading; tighten snugly without overtightening
• Replace screws one at a time to maintain alignment

This service selector knob is the user control used to select cycles or service settings on compatible Samsung appliances, restoring tactile control and clear position selection. It fits the control shaft and provides durable manual operation. What it does:

• Replaces a worn, cracked or missing service/selector knob so you can rotate and set cycles or service modes
• Restores a secure grip and clear detent positions for reliable control selection
• Helps stop slipping or loose control feel that prevents setting the dial accurately
• Works with the appliance control shaft to transmit user input to the control assembly

• Designed for shaft-mount replacement; pull off the old knob and press the new knob onto the control shaft
• Make sure the control is in the correct position before installing to align any internal splines
• Disconnect power to the appliance before attempting repairs to avoid shock or machine operation

This wafer-head Phillips screw (#8 x 3/8 in) is a factory fastener used to secure panels, brackets, and covers in compatible appliances. Replace a missing or damaged screw to restore a tight, properly aligned fit. What it does:

• Secures sheet-metal or plastic components to the appliance chassis or subassemblies
• Helps maintain proper alignment and reduce vibration or rattling
• Replaces lost, stripped, or corroded screws of the same size and type
• Used at panel, bracket, and cover mounting points designed for this fastener

• One wafer-head Phillips screw (#8 x 3/8 in)

• Disconnect power (and gas, if applicable) before servicing
• Start threads by hand to avoid cross-threading; use a #2 Phillips driver
• Do not overtighten, especially into plastic or thin sheet metal
• Replace only with the same size/type fastener removed to ensure proper fit

A small replacement service cap that snaps into the appliance's control panel to cover the fan indicator. Restores the original look and keeps the panel clear and protected from dirt and wear. What it does:

• Covers the control-panel cutout for the fan indicator to restore the original appearance
• Keeps dirt and debris out of the indicator opening
• Provides the visible fan icon for correct user feedback
• Helps prevent accidental pressing or damage to the underlying switch or indicator

• Disconnect power to the appliance before starting any work
• Typically snaps into the panel opening; remove the trim or bezel if needed for access
• Align the icon and press gently until the cap clicks into place; do not force

This HiLight hotplate is a single radiant cooktop element that restores heating on compatible glass-top ranges. It replaces a failed or damaged hotplate so cookware can heat evenly and burners function reliably again. What it does:

• Replaces a cracked, non-heating, or intermittently heating HiLight hotplate
• Provides the radiant heating surface under glass-ceramic cooktops
• Fixes symptoms such as a burner that won't glow, uneven heating, or no heat from one cooking zone
• Works with the existing element connections and retaining hardware on compatible cooktops

• Disconnect power to the cooktop at the breaker before servicing
• Handle glass-ceramic tops carefully to avoid chipping or cracking when removing/installing the element
• Verify the part number on the old element before installation