Jas9900bas Parts

Size: 10-16 X 0.95 inch.

This is a replacement mounting screw for the refrigerator/freezer thermostat assembly. It secures the thermostat to the cabinet so temperature sensing and control remain stable and reliable. What it does:

• Secures the thermostat housing or bracket to the appliance cabinet
• Keeps the thermostat properly positioned for accurate temperature sensing
• Common fix when a loose, missing, or stripped thermostat fastener causes rattling or poor contact
• Small hardware part used during thermostat replacement or reassembly

• One thermostat mounting screw

• Turn off power to the appliance before starting any repair
• Use appropriate screwdriver and do not overtighten to avoid stripping the housing or threads
• If original hole or threads are damaged, inspect bracket or cabinet and replace as needed

This infinite switch is the variable control used to regulate heat on an electric range surface element. It restores adjustable burner heat so you can set and maintain the correct cooking temperature. What it does:

• Controls the power level to a surface heating element, allowing gradual heat adjustments rather than just on/off.
• Can cause symptoms such as a burner that won't heat, heat stuck at one setting, or inability to change element temperature.
• Replaces a failed or intermittently working control that may show no continuity when tested.
• Works with standard knob-operated rangetop elements.

• One infinite switch

• Disconnect power to the appliance at the breaker before starting any repair.
• Replacement typically requires removing the infinite switch from behind the control knob/console—keep track of wiring and clip locations.
• Use a multimeter to confirm the old switch is faulty before replacing.
• If replacing on a glass-ceramic cooktop, follow manufacturer guidance to avoid scratching or damaging the surface.

This broil heater assembly replaces a failed upper-oven broil element to restore top-heat cooking and browning. It fits many GE ovens and provides a direct-replacement heating element for broiling performance. What it does

• Heats the top of the oven cavity for broiling, broil-browning, and crisping finishes
• Restores proper broil function when the element is visibly burned, broken, or not heating
• Works with the oven's broil control to reach required temperatures for short, high-heat cycles
• Helps eliminate uneven browning caused by partial or intermittent element failure

• One broil heater assembly

• Disconnect power to the range/oven at the breaker before starting any repair
• Access typically requires removing the oven back panel or interior broil access screws; keep track of fasteners
• Avoid contact with the element until fully cool; wear gloves and eye protection as needed
• Verify the part number on the oven tag and compare the old element to this assembly before installation

This broiler pan grid is the oven rack insert that holds food above the broil pan to promote even browning and let drippings fall away. It restores broiling performance for ovens using a two-piece broil pan set. What it does:

• Supports meats and vegetables during broiling so heat circulates around food for better sear and browning
• Allows drippings to fall into the lower broil pan to reduce smoke and flare-ups
• Replaces a missing, warped, or damaged grid that can cause uneven cooking or food slipping through
• Fits into the matching broil pan to restore original broiling configuration

• Ensure oven is off and grid has cooled before handling or installing
• Place grid into the broil pan with grid edges seated securely in the pan
• Clean after use with warm, soapy water; avoid harsh abrasives that can damage the finish

Package of 12

This bracket mounting terminal secures the appliance's main electrical terminal block to the cabinet, keeping wiring stable for a safe, reliable power connection. It's a direct-fit replacement where terminal block support is damaged or loose. What it does

• Physically mounts and supports the main terminal block so incoming power wires stay secure
• Keeps wiring strain-relieved to reduce the risk of loose connections or arcing
• Restores a stable electrical connection when a broken or bent bracket causes intermittent power or poor contact
• Helps prevent overheating at the terminal connection by maintaining proper alignment

• One bracket mounting terminal

• Disconnect all power before servicing; lock out and tag if needed
• Use basic hand tools; avoid overtightening terminal screws to prevent damage
• Inspect wiring and terminal block; replace any damaged wires or connectors when present

This drawer support holds and guides a refrigerator or freezer drawer so it opens and closes smoothly, restoring proper drawer alignment and stability. It's a direct-fit replacement designed to revive normal drawer function. What it does:

• Supports the drawer on its track so drawers glide without sagging or binding
• Restores alignment when the drawer tilts, sticks, or falls out of position
• Helps eliminate uneven movement, catching, or scraping during operation
• Works with the drawer rail system to maintain smooth front-to-back travel

• One drawer support

• Disconnect power to the appliance before servicing to reduce shock risk
• Remove drawer and any shelves to access the support; follow OEM disassembly steps
• Replacement typically snaps or screws into the existing rail; retain original fasteners if reusable

This handle base is the mounting support that secures an appliance door handle to the door, restoring proper fit and stable grip so the handle stops wobbling and operates reliably. What it does:

• Secures the door handle to the door frame so the handle stays tight and aligned
• Replaces worn, cracked, or broken mounting support that causes a loose or wobbly handle
• Helps restore safe, consistent opening and closing of the appliance door
• Matches OEM fit where the original handle base has failed

• One handle base

• Disconnect power (or unplug) and follow appliance safety procedures before starting
• Remove the door or access panel as required to reach handle mounting screws; retain original hardware unless replacement hardware is provided
• Use basic hand tools; avoid overtightening screws to prevent cracking the new base

This broil handle clip secures the broiler door handle to the oven door, restoring a safe, solid grip and preventing the handle from slipping or detaching. It's a small replacement part that fixes loose or wobbly broiler handles. What it does:

• Holds the broil/door handle firmly in place so the handle doesn't move or fall off
• Addresses symptoms like a loose, wobbly, or partially detached broiler handle
• Matches OEM function and fit to maintain proper door operation
• Works with the existing handle and mounting hardware when undamaged

• One broil handle retaining clip (single clip as shown)

• Disconnect power to the appliance before beginning any repair
• Remove the oven door or access panel per the manufacturer instructions to reach the handle clip
• Reuse existing screws and handle hardware unless they are damaged; replace as needed

This bracket base is a replacement support bracket that secures and stabilizes appliance components, helping restore proper alignment and reduce movement. Use it to replace a cracked, bent, or missing base bracket for safe, stable operation. What it does:

• Provides a sturdy mounting point to secure panels, assemblies, or controls
• Restores proper alignment when a worn or damaged bracket allows shifting
• Helps eliminate vibration or rattling caused by loose support hardware
• Prevents further wear by re-establishing correct component positioning

• One bracket base

• Disconnect power to the appliance before beginning any repair
• Verify orientation and fastener locations against the appliance diagram before removal
• Use the correct size screwdriver or socket to avoid stripping fasteners
• Handle edges carefully and wear gloves; replace any damaged fasteners or clips

This is a black rocker switch used to control a function on compatible ranges/cooktops. Replacing a worn or inoperative switch restores positive on/off control and reliable operation of the connected feature.

• Controls an appliance function (such as a light or igniter circuit) with a single on/off action
• Common failure signs: switch won't stay on, no response when toggled, intermittent operation, or physical damage/discoloration
• Direct-fit replacement designed for the original switch location
• Helps restore safe, predictable control to the appliance

• Disconnect power and, if applicable, shut off gas before servicing
• Access is typically from the control panel; retain orientation of wires and note terminal positions
• Transfer wires one at a time to the new switch to avoid miswiring
• Inspect connectors for heat damage; replace damaged terminals before reassembly

A replacement bake element that provides the oven's primary heat for baking and roasting so food cooks as expected. Installs in the oven cavity and heats during bake cycles. What it does:

• Heats the oven cavity during bake cycles to produce consistent baking and roasting temperatures
• Restores heating when a damaged or broken element causes no heat or poor baking results
• Visible signs for replacement include breaks, blisters, or burn marks on the element
• Works with the oven's control system and temperature sensors to reach set temperatures

• One bake element

• Disconnect power to the range at the breaker before starting any service
• Handle the element carefully — the exposed metal and insulation can be fragile
• Remove oven racks for access and reconnect terminal fasteners firmly; do not overtighten

This extruded refrigerator door handle provides a durable, easy-grip replacement that restores a secure, finished pull on compatible GE refrigerators. Ideal when the existing handle is cracked, loose, or cosmetically worn. What it does:

• Replaces a damaged or broken refrigerator door handle to restore safe opening and closing
• Provides a full-length, extruded grip for comfortable handling
• Matches original mounting points for a direct-fit swap on compatible doors
• Improves appearance by replacing a scratched, faded, or cracked handle

• Typically installs with screws or clips at the door; refer to your model's service manual for exact fasteners
• Power/appliance disconnect not required for handle replacement, but remove contents and support the door to prevent slippage
• Handle surface may have protective film—remove before use