Jas9900bas Parts

This oven rack is a replacement wire shelf that supports cookware and bakeware for standard ranges and ovens. It restores proper cooking clearance and helps maintain even heat circulation inside the oven. What it does:

• Provides a stable shelf for pots, pans and baking sheets during cooking or baking.
• Restores correct rack positioning when the original rack is missing, bent, or worn.
• Helps maintain proper airflow and even heat distribution by holding items off the oven floor.
• Fits into existing left/right rack supports and slides into place on oven rack guides.

• Remove power to the appliance before accessing the oven interior for safety.
• Install by sliding the rack into the oven's existing rack guides until fully seated.
• Handle with care; edges can be sharp and the rack will be hot after use.

This center trim is the molded bezel that fits the front center of the cooktop/oven control area, restoring a finished look and protecting the control panel edges from heat and grime. What it does:

• Covers and protects the exposed edge of the control panel for a clean appearance
• Hides gaps, chips or discolored trim that make the console look worn
• Helps prevent dirt and grease from getting behind the control assembly
• Restores proper alignment and fit where the original trim is cracked or broken

• Disconnect power to the appliance before starting any repair.
• Typically secures with clips or screws—retain hardware and note orientation when removing old trim.
• Handle edges carefully; replacement may require gentle prying with a trim tool.
• If mounting hardware or support brackets are damaged, replace them separately.

A 6" surface unit switch that controls the heat level of a compatible electric cooktop burner, restoring reliable temperature selection and burner response. Direct-fit replacement for ranges that use a 6-inch surface element control. What it does:

• Regulates power to a 6" surface heating element so you can set and change cooking temperature.
• Replaces a worn or failed infinite/surface switch that causes a burner to be stuck on, not heat, or not respond to control settings.
• Works with standard knob-style controls and factory wiring harnesses used on compatible electric ranges.
• Helps restore smooth, graduated temperature changes between settings.

• One 6" surface unit switch (as pictured)

• Disconnect power at the breaker or unplug the range before servicing to avoid electric shock.
• Mounting and panel removal may be required; use proper tools and avoid bending terminals.

This replacement screw secures trim and appliance panels with a compact 3/8" length and #8-18 thread, providing a simple fastener solution for loose or missing hardware. Fits a variety of appliance assemblies where short machine screws are used. What it does

• Fastens panels, trims, brackets, and small components that use #8-18 threaded holes
• Restores secure attachment for loose or rattling parts
• Replaces stripped or missing short screws to prevent gaps or movement
• Small size is suited for shallow mounting areas and sheet-metal attachments

• One screw

• Use the correct driver or bit to avoid stripping the head; a magnetic screwdriver helps with small fasteners
• Tighten until snug—do not overtighten to prevent thread damage or panel deformation
• Disconnect power to the appliance before working on internal components or near electrical connections
• Match those details for best fit and performance

This broil door handle attaches to the oven/broil door to provide a secure grip for opening and closing the broiler. Durable replacement to restore normal door operation and safe access to the broil compartment. What it does:

• Replaces a worn, broken, or loose broil/oven door handle so the door opens and closes securely.
• Provides a stable grip to reduce slipping when accessing the broiler section.
• Restores correct fit and alignment for doors that wobble due to a damaged handle.
• Helps prevent contact with hot surfaces by enabling controlled door movement.

• Installation requires removing the oven door or accessing broil door screws—follow your oven's service manual for safe procedure.
• Disconnect power to the appliance before beginning work to avoid electrical hazards.
• Use proper hand protection to avoid cuts from sheet metal or sharp edges during removal/installation.
• Keep and reinstall any original screws or clips; only use supplied hardware if explicitly listed.

This cooktop complement is the OEM replacement trim piece that restores the cooktop's finished edge and proper fit. It helps maintain a secure seal and clean appearance on compatible cooktop assemblies. What it does:

• Replaces damaged, bent, or missing cooktop trim to restore appearance and edge protection
• Helps maintain proper alignment between the cooktop surface and surrounding countertop
• Prevents gaps where spills or debris can collect along the cooktop edge
• Works as the factory-specified cosmetic and finishing component for compatible cooktops

• One cooktop complement trim piece as shown

• Disconnect power to the appliance before servicing to avoid electrical or shock hazards
• Handle glass or ceramic cooktop surfaces carefully to avoid breakage or cuts
• Basic hand tools may be required; follow the manufacturer's service instructions for proper fitment

This backguard is the rear panel that fits behind the cooktop to protect the wall and enclose the range's control area. It restores the original look and shields wiring and components from heat and splatter. What it does:

• Covers and protects the rear of the range top and control area from spills, grease, and heat
• Conceals wiring and control connections for a clean appearance
• Restores a damaged, bent, or corroded backguard to improve safety and aesthetics
• Supports mounting for control components and trim where applicable

• Disconnect power to the range before beginning any service to avoid electrical shock
• Removal may require lifting the cooktop or removing control knobs and mounting screws; keep track of fasteners
• Handle carefully to avoid scratching the finish; use appropriate tools and have a second person if the panel is large

This glass oven door assembly replaces a cracked or damaged outer oven door glass to restore the oven's appearance and help keep heat contained. Fits as the complete outer door panel for compatible GE ovens. What it does:

• Replaces damaged or shattered outer oven door glass to restore a safe, finished door surface
• Helps maintain proper heat containment and prevents heat loss from the oven cavity
• Restores a sealed viewing surface so interior light and visibility are usable
• Addresses visible cracks, chips, or broken glass on the oven door

• High-level replacement: door removal is typically required; refer to your model's service manual or OEM instructions
• Use gloves and eye protection when handling broken glass; disconnect power before starting
• Confirm fit by matching part number before installation

This oven bottom panel provides the flat inner surface that supports cookware and protects oven components from spills and debris. It restores a clean, even cooking surface and helps contain drips for easier cleanup. What it does:

• Covers and protects the oven cavity floor and underlying components from food spills and debris
• Provides a stable surface for pans and baking sheets to sit on during cooking
• Helps prevent direct access of drips to lower heating elements
• Can reduce smoke from burned-on spills by replacing a warped or damaged bottom

• One oven bottom panel

• Disconnect power to the appliance before starting work
• Remove oven racks and any broiler drawer or lower panel as needed to access mounting screws
• Use caution—edges may be sharp; wear gloves and eye protection
• Reinstall all removed parts and test the oven on a low setting to verify proper fit and operation