Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This replacement ice bucket housing encloses and supports the freezer's ice storage bin at the dispenser. A damaged housing can cause bin wobble or misalignment—replacing it restores a secure fit, smoother dispensing, and helps reduce stray ice and frost.
The removal of the ice bin and auger motor was easy but removing the auger from the shaft was another story. The auger was frozen to the shaft even after it sat out overnight. I carefully applied heat with a propane torch, directly on joint of the auger and the tip of the shaft, followed by a few drops of cold water. Once the shaft and auger cooled the auger separated easily. Putting the components back together was simple taking about ten more minutes. Read more
Usually ships within 4 - 14 days
Fixes clicking noise from compressor and fridge not cooling. Includes relay, overload protector, and capacitor. Most DIYers complete in 20-30 minutes.
Thawed out the evap/heat exchanger assembly, replaced the overload/relay kit as well as the defrost control board and the fridge was back in business, everything working fine. I'm kicking myself for not ordering these parts earlier. there was a clicking sound coming from the compressor that I ignored which was a huge mistake. Read more
Replaces a worn or broken door closer that mounts on the refrigerator hinge. Restores smooth closing action when the original cam is cracked or damaged.
These parts fixed the problem. Read more
Freezer not cooling or fan not running? This evaporator fan motor circulates cold air across coils to maintain even temperatures. DIY-friendly repair.
Through troubleshooting and videos from Appliance Parts Pros, I actually had ordered 3 different parts until coming to the conclusion that it was the Evaporator Fan Motor. The old fan was working, but apparently not to its' full capacity. The greatest part of dealing with Appliance Parts Pros is being able to return parts if they are discovered to not be the correct ones. It makes it nice for DIY'ers. Read more
This thermostat retainer clip secures the defrost thermostat to the evaporator tubing in your refrigerator or freezer, maintaining firm contact for accurate temperature sensing and dependable defrost operation.
This seal strip replaces a worn or damaged door gasket edge to restore a proper seal and help the appliance maintain temperature and operate quietly. It's a direct-fit service part used where a continuous seal is required. What it does:
Refrigerator air return cover assembly snaps into the back wall to direct airflow and protect the return opening. Replace if cracked, broken, or missing.
The appliance repair technician showed me that the blue flab of this air vent was missing. He said that the part would cost about $150 so he put a piece of tape over it to limit the air flow. This might have worked fine but I had used AppliancePartsPros.com to keep a dishwasher going previously and checked what they wanted for the part. I found it available, affordable and had the factory like repair done in a few days. The part just snaps into place requiring no tools or skill! Read more
This knurled pin secures the juicer cone and helps transmit torque for proper juicing action. It replaces a worn or damaged roll pin to restore stable cone alignment and smooth operation. What it does:
I ordered the Fountain door kit. I used a screwdriver and #10 Torx. I'm a Jack-of-all-trades, but have never worked on an ice maker before. First, I unplugged the refrigerator. The front panel popped off with ease. Once I got in I could see what needed to be disconnected. All parts fit like a charm, with the exception of the pin-roll. I could not figure out where this was located. The fountain works great. I could not believe how fast the order was received. The same day I ordered, I received... Read more
Seals the refrigerator fill tube connection to prevent water leaks. Replace if cracked, worn, or missing to keep water properly routed through cabinet.
Replacement hex nut secures panels, trim, and brackets in refrigerators. Needed when original nut is worn, missing, or stripped, causing loose components.
Fix intermittent water leaks or flow issues from your dispenser with a new ball sleeve. This guide supports the valve ball for a proper seal.
Seals your refrigerator's fresh food door to maintain proper temperature and prevent air leaks. Replace if worn, torn, or warped. Confirm fit with your model.
Watched the video online and replaced the seal with my wife. Read more
Panel fastener screw for refrigerators and freezers. Secures cabinet panels, trim, and components. Replace if missing, stripped, or damaged.
Upper hinge cover kit for refrigerators. Installs on top hinge assembly to conceal hardware. Replace if cracked, broken, or missing for a clean finish.
Machine screw secures appliance panels, brackets, and internal components. Replace missing, stripped, or worn fasteners for reliable assembly.
Purchased the parts after entering the model number and getting a parts break down. After receiving the parts I removed the old hinge pin and installed the new. Read more