Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Kit includes more than shown on picture. New kit is for both plastic and stainless tubs. Plastic tubs use only the float and the switch stainless tubs use all the parts.
I replaced the float switch. It was an easy enough repair. I didn't have to remove the dishwasher to do the work. The part is accessible from behind the front skirt.The only problem was there is not a lot of space to work in. Getting the fastener off and on requires a stubby nut driver. I used a flexible extension instead. I had to feel for the nut as the bottom of the door blocked my view. A ten minute job and the dishwasher is back in service (for half the cost of my local parts place) While... Read more
Bottom
Part I ordered was not the problem. The corners of the dishwasher were loaded with garbage, grease and other foodstuffs. I digitally cleaned out the corners, re-seated the door seal and used a cleaner in the machine. Did two courses of cleaning. Also needed to clean the pump screen and top of the pump. Lots of junk there. All of this fixed the leaking and the junk on the dishes. Hardest part was loosening the duct from the top impeller to the pump. Read more
Replaced gasket. Read more
This inner slide rail (track) supports a refrigerator/freezer drawer and restores smooth, stable gliding for the drawer. Replacing a worn or damaged rail helps stop sticking, misalignment, rattling or partial drawer drops. What it does:
What's included: One inner slide rail (track) Install notes:
Replaced pump and filter. Read more
First, I checked the Appliance Parts Pros website and learned how to do a reset (unplug, wait, plug back in). That restored some functions, but not all. After further reading about people who had resolved similar problems, I decided to order and replace both the electronic control board and the control panel. (I was pretty sure it was only the control panel, but decided to do this once, replace both parts and get a new, fresh start.) Concerning the electronic control board, this model of... Read more
This dishwasher door seal is used on some Amana, Maytag, Magic Chef, Crosley, Samsung, Admiral and Jennair dishwashers.
Removed old gasket. Installed new gasket. Read more
Replaced dishwasher door latch assembly. Read more
Upper dishwasher rack includes both adjusters and several accessories within the rack.
Bought them:) The top rack was more difficult as the water "spout" on the bottom of the top rack needed to be removed and put on the new rack. There were no instructions, and it was difficult to get snapped off. I didn't want to break it. It was easy to snap in place on the new rack however, once I got it off. The bottom rack just slid on. Read more
Color: Stainless steel
I used stainless front panels on the Maytag and Bosch dishwashers and also the Jenn-air trash compactor. They look great and wish I had updated sooner. Shipping for fast and wrapped well. Read more
Tested starter capacitor at 2.16µF. pic: http://s29.postimg.org/e05fufxdz/IMG_20150716_140312.jpg It should be 15µF. pic: http://s29.postimg.org/x3yrasa87/IMG_20150718_112327.jpg Contrary to service manual, capacitor is not accessible behind the toe/kick-plate; it is underneath but all the way towards the rear. To get to it, the dishwasher has to be removed and positioned face-down (drain first, use towels/drop-cloth). Read more