Jds1860aap Parts

Replacement burner cap kit for gas cooktops that restores proper flame shape and protects the burner head from spills and debris, helping burners heat more evenly and reducing ignition issues. What it does:

• Sits over the burner head to shape and stabilize the flame for consistent cooking
• Shields burner ports from spills and food build-up that can clog ports and affect flame
• Replaces cracked, chipped or missing caps that cause uneven heating or noisy flames
• Can help improve ignition reliability when burner ports are clear and caps are seated correctly

• Turn off the gas supply and ensure the cooktop is completely cool before servicing
• Typically installs by lifting off the old cap and placing the replacement into position; do not force parts
• Clean burner head and ports of debris before installing new cap to ensure proper seating and flame

This spacer provides a precise gap for proper alignment and clearance between components, helping maintain correct part positioning for reliable operation. It's a simple replacement that restores intended spacing and reduces wear. What it does:

• Positions and separates adjoining parts to maintain correct clearance
• Helps prevent rubbing, misalignment, or binding of moving components
• Restores factory spacing after maintenance or part replacement
• Fits where the original spacer was used to support assembly alignment

• One spacer as shown

• Inspect surrounding components and mounting surfaces for damage before installing
• Remove power to the appliance and follow manufacturer service instructions
• Install in the same orientation as the original spacer and verify proper clearance
• If fasteners or adjacent parts are worn, replace them to ensure a secure fit

This oven door glass replaces a cracked or damaged glass panel to restore a safe, clear viewing area and help contain heat inside the oven cavity. It fits into the oven door assembly and lets you check cooking progress without opening the door. What it does:

• Replaces a broken, cracked, chipped or scratched oven door glass panel
• Restores a clear viewing window so you can monitor food without opening the door
• Helps maintain proper oven cavity containment when installed correctly
• Improves safety by removing damaged glass that could shatter

• Disconnect power to the appliance before starting any repair.
• Handle glass with heavy gloves and eye protection; place on a padded surface to avoid damage.
• Door removal or partial disassembly is commonly required; follow the oven manufacturer's service instructions.

This glass bracket secures the oven/microwave door glass, keeping the inner glass panel aligned and stable for safe operation. It replaces worn or damaged brackets to restore proper door fit and reduce rattling. What it does:

• Secures and supports the door's inner glass panel to maintain alignment
• Prevents glass movement that can cause vibration, noise, or improper sealing
• Helps restore proper door closing and even heat retention when functioning parts are present
• Commonly replaced when bracket is cracked, bent, or missing mounting integrity

• One glass bracket

• Disconnect power to the appliance before beginning any repair
• Handle glass carefully; wear cut-resistant gloves and eye protection
• Installation typically requires partial door disassembly and removal of retaining screws—keep track of fasteners

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This surface burner igniter is the spark electrode that lights the flame on your gas cooktop or range. Replacing a worn electrode restores reliable ignition at the affected burner for fast, consistent lighting.

• Generates a high-voltage spark at the burner to ignite gas
• Positions and insulates the tip for consistent flame lighting
• Common symptoms: burner won't ignite or no spark at that burner
• Other signs: needs a match to light, intermittent/erratic spark, cracked ceramic

• Disconnect power and shut off gas supply; allow appliance to cool
• Remove burner cap and head to access the electrode; note wire routing and mounting
• Transfer any bracket/clip from the original part if required and set proper gap/position near the burner port
• Restore power and gas, then test ignition at the repaired burner

This is a standard oven rack that supports cookware and pans inside the oven, restoring a stable cooking surface for baking, roasting, and broiling. What it does

• Provides a durable shelf for pots, pans and baking sheets
• Slides into the oven's rack supports to position cookware at the correct cooking height
• Replaces bent, warped, or missing racks that cause uneven cooking or tipping
• Compatible with typical slide-in and drop-in rack support systems

• One oven rack

• Install by sliding the rack into the oven's existing rack supports until fully seated
• Make sure the rack is oriented correctly (top/bottom) per your oven's rack guides
• Always let the oven cool before removing or installing the rack and use oven mitts when handling hot racks
• Clean with non-abrasive cleaners; avoid steel wool or harsh chemicals that can damage the finish

This control knob replaces a worn or broken stove/dryer control knob to restore reliable user control and selector operation. It fits directly onto the original shaft for simple, intuitive use. What it does:

• Provides a firm grip for turning the control shaft to select settings
• Restores accurate control when the original knob is cracked, stripped, or loose
• Prevents slipping so settings remain set during use
• Matches the original shape to maintain proper alignment and function

• One control knob as shown

• Pull the old knob straight off the control shaft; push the new knob onto the shaft until fully seated
• Disconnect power to the appliance before removing panels or working near electrical components

This small mounting clip secures panels or components in place to help prevent rattles and movement during operation. It provides a simple, low-cost way to restore proper fit and reduce noise from loose parts. What it does:

• Holds trim, panels or wiring harnesses in position to prevent shifting
• Helps stop rattling or vibration caused by loose components
• Restores secure engagement where a broken or missing clip allowed gaps
• Commonly used where a small plastic or metal retainer is required to lock parts together

• One replacement clip as shown

• Turn off and unplug the appliance before starting any repair
• Inspect the mounting area to confirm clip orientation before installing
• Push or snap the clip into place; use hand tools only if needed to avoid damage
• Replace any adjoining fasteners or retainers that are worn

This grate kit replaces worn or damaged cooktop grates to restore stable cookware support and safe burner use on compatible gas ranges. It keeps pots and pans steady for safer, more reliable cooking. What it does

• Replaces cracked, warped, or missing grates that cause unstable cookware
• Restores a flat, secure surface so burners heat pots and pans evenly
• Helps prevent direct contact between cookware and burner components
• Reduces rattling or shifting grates that can occur during normal use

• One grate kit as shown

• Turn off burners and let the range cool completely before installing
• Remove old grates and position the new grate pieces so they sit flat and stable
• No modification required; follow the range owner's manual for proper placement
• If you smell gas or notice a burner problem after installation, stop use.

This inner oven door glass replaces cracked, fogged, or broken oven window glass to restore visibility and help the door seal properly. It's a direct-fit replacement designed to match the original door assembly. What it does:

• Provides a clear viewing window so you can monitor cooking without opening the door
• Restores a solid, undamaged surface to prevent drafts and heat loss through the door
• Replaces cracked or shattered glass that can be a safety hazard
• Helps maintain proper oven temperature by sealing the door assembly

• Handle with care; glass can be sharp—wear gloves and eye protection
• Disconnect power to the appliance before beginning any repair
• Follow the oven door disassembly steps in the manufacturer service manual; heavy or awkward pieces may need a second person

This replacement oven cavity insulation helps contain cooking heat and protects nearby components for more even baking and safer operation. It restores the oven's thermal barrier when old insulation is damaged or missing. What it does

• Provides thermal protection for the oven cavity and surrounding cabinet components
• Helps reduce heat loss for more consistent oven temperatures during use
• Limits heat transfer to adjacent parts and control areas to prevent overheating
• Commonly replaced when insulation is torn, burned, compressed, or missing

• One oven cavity insulation piece as shown

• Disconnect power to the appliance before starting any repair; unplug or switch off the circuit breaker
• Remove oven panels or racks as needed to access the insulation; follow the oven's service manual for panel removal
• Handle insulation with care; wear gloves and a dust mask if materials are fibrous or dusty
• Reinstall panels and restore power only after insulation and clearances are confirmed per the manufacturer's guidance