Jds1860aap Parts

This flat washer is a direct-replacement fastening washer that restores proper spacing and fastening for appliance panels and components. It helps re-secure loose hardware so assemblies sit and operate as intended. What it does:

• Provides a smooth bearing surface for bolts and screws to distribute load
• Helps keep fasteners tight to prevent wobble or loose panels
• Restores correct spacing and alignment between mating parts
• Can reduce vibration-related noise when worn or missing

• One replacement flat washer

• Disconnect power and water before starting repairs
• Use the correct size socket or driver to remove and reinstall fasteners
• Inspect mating fastener and surrounding parts for wear; replace if damaged
• Tighten hardware securely but avoid overtightening which can deform the washer

This oven bake element replaces a failed or damaged heating element to restore even baking heat. It mounts inside the oven cavity and provides the high-temperature heat source used during bake cycles. What it does:

• Heats the oven cavity during bake cycles so the oven reaches and maintains baking temperatures
• Common symptom fix: no heat or oven not reaching set temperature
• Common symptom fix: element is visibly broken, burnt, or arcing
• Works with the oven's internal controls and thermostats to produce consistent bake performance

• One bake (oven) heating element

• Disconnect power to the appliance before starting work to avoid electric shock
• Allow the oven to cool completely before handling the old element
• Support the element while removing mounting screws and disconnecting wires; note wire location for reassembly
• After installation, restore power and test the oven on a low bake setting to confirm correct operation

This heat shield protects oven cavity components from direct heat and helps maintain correct temperature distribution for reliable cooking. It replaces a damaged or warped shield to help prevent heat-related wear. What it does:

• Deflects and disperses radiant heat away from sensitive panels and wiring.
• Helps maintain even internal oven temperatures for consistent cooking.
• Prevents heat damage to insulation, wiring, and nearby components.
• Common symptom: visible warping, burn marks, or a detached/damaged shield.

• Disconnect power (and gas if applicable) before starting any repair.
• Wear gloves to protect against sharp edges and hot surfaces.
• Reinstall using the original fasteners; verify proper alignment and clearance.
• Follow the appliance manufacturer's instructions and diagrams for safe, correct installation.

A replacement wire insulation sleeve that protects appliance wiring from heat, abrasion and vibration to help maintain safe electrical connections. Installs quickly to restore proper insulation on exposed or damaged wiring. What it does:

• Shields wiring from heat and rubbing that can wear or melt insulation
• Helps prevent electrical shorts and intermittent power caused by chafed wires
• Holds wiring away from sharp edges and moving parts
• Used where original insulation has cracked, split or burned

• One wire insulation sleeve

• Disconnect power to the appliance before starting any work
• Slide sleeve over the wire and position to fully cover the exposed area; secure per OEM routing and retainers
• Inspect nearby wiring and components for heat or abrasion damage and replace if needed

This orifice spud directs gas flow into the burner for consistent ignition and flame control. It restores proper burner performance so cooking heats evenly and burners light reliably. What it does:

• Seats the burner orifice to control gas flow to the burner
• Helps maintain a steady, even flame for consistent cooking
• Can resolve weak or uneven flames and burners that struggle to light
• Works as the sealed interface between the gas manifold and burner tube

• One orifice spud

• Turn off the gas supply and disconnect power before servicing
• Inspect surrounding seals and gaskets for damage and replace if necessary
• Use basic hand tools; avoid overtightening to prevent damage

This clip is a small mounting retainer used to secure panels, harnesses, or trim pieces on compatible Whirlpool appliances. It provides a simple, reliable hold to keep components in place and prevent rattles or shifting during use. What it does:

• Secures plastic panels, trim, or wire harnesses to the appliance frame
• Helps prevent vibration noise by holding parts tight
• Keeps wiring and small components routed and out of the way
• Simple mechanical retention—no tools-specific hardware required for the clip itself

• One clip

• Disconnect power (and water, if applicable) before beginning any repair
• Inspect surrounding parts and alignment before installing the clip to avoid forcing it
• Use appropriate hand tools to remove panels or fasteners as needed; press clip into place until it snaps securely
• If the clip is brittle or broken, replace it rather than reusing damaged pieces

This burner head replaces the damaged or corroded surface burner cap to restore consistent gas flow and stable flames on your cooktop. It fits into the range's burner assembly to help deliver even heat for everyday cooking. What it does:

• Directs gas to produce an even, stable flame for stovetop cooking
• Replaces a warped, cracked, or corroded burner head that causes uneven heating
• Can resolve intermittent or irregular flames and reduced burner performance
• Works with the existing burner base and ignition system to re-establish proper operation

• Turn off the appliance and shut off the gas supply before servicing.
• Remove grates and burner caps to access the head; reassemble in reverse order.
• Use basic hand tools; inspect the burner base and igniter for damage while replacing.

The Vent Trim is an OEM part for Whirlpool ranges. It enhances the appearance of your kitchen while providing a finished look to the range vent area. It covers the gaps and edges around the range vent, creating a clean design.

A bad vent trim can occur due to wear and tear, accidental damage, or improper installation. If you notice symptoms such as loose or missing trim, gaps around the vent area, or an uneven and unfinished look, it may be time to replace the vent trim.

Symptoms of a bad vent trim include:

• Loose or missing trim
• Gaps around the range vent area
• Uneven and unfinished appearance

Repair your range by replacing the worn-out or damaged vent trim with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This grate kit replaces damaged or worn cooktop grates to restore stable support for pots and pans and keep burners working as intended. It helps maintain safe, even cooking and improves stove appearance. What it does:

• Provides a stable surface for cookware so pots and pans sit level over burners
• Directs heat and maintains correct clearance between flame and cookware
• Replaces cracked, chipped, rusted, or warped grates that can cause wobble or instability
• Helps prevent cookware from sliding and reduces hot spots from uneven grates

• One grate kit as shown

• Turn off gas and power to the appliance and allow all surfaces to cool before servicing
• Lift old grates off the cooktop; no tools are typically required for removal or placement
• Inspect burners and caps for damage or alignment before installing new grates

This replacement bumper cushions and protects the appliance door or panel, helping stop metal-on-metal contact, reduce noise, and prevent chipping or wear. Simple, low-profile part that restores smooth, quiet door operation. What it does:

• Cushions door or panel to prevent hard impacts and protect finishes
• Reduces rattling and vibration-related noise during operation
• Helps the door close more softly and sit flush with the cabinet
• Prevents premature wear where edges contact the cabinet

• Disconnect power to the appliance before starting any repair.
• Inspect the damaged bumper and surrounding area, then remove the old bumper by hand or with a non-marring tool.
• Press the new bumper into the original mounting location until fully seated; no special tools normally required.
• If the bumper mounts to a clip or bracket that's damaged, replace the bracket.

Color: Stainless

This is a replacement mounting screw used to secure appliance panels and components. It restores proper fastening so panels and parts stay aligned and stable during normal use. What it does:

• Fastens appliance panels, trim or internal components in place
• Replaces missing or stripped screws that cause rattling or loose parts
• Helps stop panel vibration and maintain proper component alignment
• Matches OEM fit where specified for a secure installation

• One replacement mounting screw

• Verify screw size and fit before installation; use the correct screw location from your parts diagram
• Turn off and disconnect power to the appliance before accessing internal components
• Hand-start the screw to avoid cross-threading; tighten until snug—do not over-tighten
• Wear safety glasses and follow manufacturer service instructions when applicable

This is a direct-replacement screw used to secure appliance panels, brackets and other small components. It restores proper fastening where the original screw is missing, stripped, or corroded to help reduce rattles and looseness. What it does

• Fastens panels, trim, brackets and similar small appliance parts
• Restores a secure connection when the original fastener is missing or damaged
• Helps stop vibration-related rattling and movement of mounted components
• Matches the original mounting point to maintain proper alignment

• Disconnect power and water before beginning any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Thread carefully and do not overtighten to prevent damage to the mating part
• Replace only with the same part number or equivalent for proper fit

This surface burner valve controls gas flow to a single cooktop burner, restoring safe, reliable ignition and flame control for gas ranges. It's a direct-replacement valve used where the original valve failed or leaks. What it does:

• Regulates gas to an individual surface burner so the burner lights and holds a steady flame
• Commonly replaces valves that stick, leak, or fail to respond to the control knob
• Helps stop gas flow when the control knob is turned off to improve safety
• Works with range ignition systems to enable consistent lighting

• One burner valve

• Turn off gas supply and electricity to the appliance before beginning service
• Follow OEM service manual and use proper seals; replace any gaskets or fittings that are damaged
• Verify correct valve orientation and secure connections; test for leaks after installation