Jds1860aap Parts

This electronic control board manages the oven or range's front-panel functions and oven operation, restoring control of temperature, timers, displays, and cooking cycles when the original module fails. Replace a faulty board to regain normal control functionality. What it does:

• Receives user inputs from the touchpad or knobs and sends commands to heating elements, igniters, and sensors
• Controls oven temperature regulation, bake/broil cycles, timers, and clock functions
• Can stop or prevent the oven from starting if the board is damaged or displaying errors
• Common symptoms: blank or erratic display, unresponsive controls, incorrect oven cycles, or oven not heating as expected

• One electronic control board (W11297274)

• Disconnect power at the breaker or unplug the appliance before servicing
• Handle the board by edges and avoid static discharge; use ESD precautions if available
• Verify wiring harness connections match original locations before reassembly
• If symptoms persist after replacement, check associated components (touchpad, sensors, power supply)

This saddle-style gas valve controls gas flow to the appliance, letting technicians create a safe, serviceable gas connection. It's used where a saddle/tap-style inlet is required for supplying natural gas to the unit. What it does:

• Provides a saddle-mounted gas shutoff and inlet for an appliance connection
• Restores gas flow when a damaged or leaking saddle valve prevents operation
• Commonly used when a service replacement or rework of the appliance gas inlet is needed
• Helps isolate the appliance gas supply for repair or maintenance

• Turn off the home gas supply and relieve downstream pressure before starting work
• Installation must follow OEM instructions and local codes; use appropriate fittings and sealants for gas service
• Check all connections for leaks with a gas-safe leak detector or soapy-water test after installation

This surface burner head replaces a damaged or worn gas range burner element to restore proper flame pattern and even cooking. It fits into the cooktop assembly and directs gas to the burner ports for consistent heat. What it does:

• Directs and shapes the burner flame for even heating across pots and pans
• Replaces warped, cracked, or clogged burner heads that cause uneven or weak flames
• Helps correct symptoms like sizzling, yellow-tipped flames, sputtering, or burners that light poorly
• Works with the burner cap and base to restore proper ignition and flame stability

• Turn off the appliance and allow all components to cool before servicing; shut off gas supply or disconnect gas/electric per your appliance manual
• Remove grates and burner caps, lift out the old burner head, and seat the new head flat on the burner base; avoid forcing or bending components
• Inspect surrounding parts (cap, igniter, burner base) for damage or buildup and clean as needed to ensure proper function

This oven rack provides a stable, adjustable shelf inside the oven so cookware sits securely for baking, broiling, and roasting. It restores proper oven organization and consistent airflow for even cooking. What it does:

• Supports cookware and bakeware at selectable oven heights for versatile cooking
• Replaces warped, bent, rusted, or missing racks that can cause instability
• Helps maintain proper clearance and airflow for even baking and roasting
• Slides into oven rack guides for easy repositioning as needed

• One oven rack

• Install by sliding the rack into the oven side rails until fully seated; no tools usually required
• Ensure the oven is completely cool and disconnected from power before handling
• Clean with warm, soapy water; avoid abrasive cleaners that can damage finishes
• Verify correct rack placement and secure fit before preheating the oven

This front drawer panel restores the cabinet-facing surface of the appliance drawer for a clean, finished appearance and proper fit. It replaces a scratched, dented, or damaged panel to improve looks and usability. What it does:

• Replaces the front exterior panel on the appliance drawer for a restored appearance
• Covers and protects the drawer front from further dents, scratches, and wear
• Helps ensure drawer closes and aligns with surrounding cabinetry
• Useful when original panel is cracked, bent, or cosmetically damaged

• Intended for repair techs or experienced DIYers; refer to OEM instructions for proper removal and reattachment
• Disconnect power and empty the drawer before beginning work
• Use care to avoid scratching the new panel during installation; handle with protective gloves
• Reuse existing screws/clips or order separately

The Power Cord is an OEM part for Whirlpool ranges. It transmits electrical power from the home's outlet to the range, allowing it to function properly. As the power conduit, the cord is essential for powering burners, oven functions, and electronic controls. 

Symptoms of a bad power cord include:

• Range not receiving power or not powering on
• Loose, frayed, or damaged appearance of the cord
• Tripped circuit breakers related to the range circuit
• Shock or electrical hazards near the range outlet

Causes of a bad power cord can be normal wear and tear over time, accidental cuts or punctures, bending fatigue from improper storage, or damage from heat if placed too close to the range top.

This OEM replacement cord from Whirlpool ensures safe, reliable power to your range. It is compatible with select models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, and Admiral.

A surface ignitor that produces the spark needed to light gas burners on compatible ranges and cooktops. Replaces a worn or failed ignitor to restore reliable ignition and consistent burner lighting. What it does

• Creates the spark at the burner to ignite gas when the control is turned on.
• Commonly used when burners click but fail to light or when a specific burner never ignites.
• Works with the cooktop's ignition system to provide consistent, repeatable sparking.
• Fits into the burner assembly and connects to the appliance's existing wiring and mounting.

• One surface ignitor (quantity: 1)

• Disconnect power to the appliance and shut off the gas supply before starting any service.
• Handle the ignitor by the ceramic/insulated areas; avoid touching the tip with bare hands to prevent contamination or damage.
• Confirm correct fit and secure all wiring connections; test ignition on a safe flame setting after reinstalling.

This oven temperature sensor measures internal oven temperature so the control can maintain accurate cooking heat. Replacing a failed sensor restores proper temperature regulation and consistent baking and roasting results. What it does:

• Senses oven cavity temperature and sends a signal to the control board
• Helps the oven reach and maintain set temperatures for consistent cooking
• Common symptom: oven not heating to set temperature or runs too hot/too cold
• May also cause oven error codes or cycling on and off frequently

• One oven temperature sensor probe

• Disconnect power at the breaker before removing or installing the sensor
• Handle the probe gently; avoid kinking or crushing the sensing element or damaging the connector
• Route wires and secure mounting so the sensor sits in its original position inside the oven cavity

This replacement door seal restores the fridge door's airtight closure to help maintain proper cooling and reduce energy loss. Designed to fit original-style openings, it keeps cold air in and warm air out for reliable food preservation. What it does:

• Creates an airtight seal along the refrigerator door edge to maintain consistent interior temperatures
• Helps prevent frost buildup and reduces strain on the compressor by improving efficiency
• Addresses common symptoms like warm spots near the door, excess frost, or a door that won't close snugly
• Fits into the door channel and compresses when the door is closed to form a tight barrier

• Replacement may require door removal and trim manipulation; follow your model's service instructions
• Inspect the door channel and mounting flange for damage or debris before installing the new seal
• Warm the seal slightly to ease installation and ensure a uniform fit; avoid open flames or excessive heat
• Test the door for a consistent seal after installation and make any hinge/strike adjustments if needed

This front mounting bracket secures the appliance's front panel and helps keep the cabinet and components aligned for stable operation. A direct-fit replacement that restores proper panel fit and reduces vibration or rattling. What it does

• Secures the front panel or trim to the cabinet to maintain alignment and prevent gaps.
• Keeps adjacent components from shifting, helping reduce vibration and noise.
• Commonly replaces cracked, bent, or missing brackets that cause loose or misaligned panels.
• Helps restore correct door/panel fit and smooth operation of attached controls or trim.

• One front mounting bracket

• Disconnect power (and water if applicable) before starting any repair.
• Access may require removing the front panel or trim—keep screws and fasteners organized.
• Inspect mating surfaces and existing fasteners; replace any damaged screws or clips.

This mounting bracket secures appliance components to the cabinet or chassis, restoring proper alignment and support. Designed to replace damaged or missing brackets, it helps reduce vibration and prevent parts from shifting during use. What it does

• Provides a stable anchor point for internal components or panels
• Restores proper alignment and fit between the appliance cabinet and mounted parts
• Helps reduce vibration and rattling caused by loose or broken supports
• Commonly replaced when bracket is bent, cracked, or missing

• Inspect adjacent fasteners and mounting holes; replace any stripped screws or damaged hardware
• Use appropriate tools and mounting hardware for secure installation; torque to OEM recommendation if available
• Disconnect power before working on electrical appliances and follow all safety guidelines

This orifice spud is the small gas fitting that directs fuel from the range/oven valve to the burner, helping maintain the correct gas flow for stable ignition and consistent flame control. What it does

• Seats in the gas valve or burner assembly to channel gas through the proper orifice
• Restores correct fuel flow when a damaged or clogged spud causes weak or no flame
• Helps correct symptoms like burners that won't light, low or uneven flame, or inconsistent cooking heat
• Works with the existing valve and burner components to re-establish reliable ignition

• One orifice spud

• Turn off the appliance gas supply and disconnect power before starting any work
• Remove grates and burner parts to access the valve/burner area; keep parts organized for reassembly
• Tighten to OEM torque; do not force fittings or overtighten threads

This door hinge assembly secures and guides the appliance door for reliable opening and closing, restoring proper alignment and smooth operation. Replace a worn or damaged hinge to stop sagging or uneven door movement. What it does:

• Re-establishes proper door alignment so the door seals and closes correctly
• Supports the door weight and provides a pivot point for opening and closing
• Helps eliminate sagging, rubbing, or uneven gaps around the door
• Works with the appliance's existing mounting points and fasteners

• One door hinge assembly

• Follow the appliance manufacturer's service manual for safe removal and installation
• Disconnect power (and water, if applicable) before servicing to avoid shock or other hazards
• Use proper tools and keep fasteners organized; some adjustments may be required for final alignment

This wire harness connects the appliance's control and electrical components to restore reliable power and signal routing. It replaces damaged or worn wiring to help stop intermittent power, controls not responding, or component failures. What it does

• Routes power and control signals between the control board and components
• Replaces frayed, broken, or burnt wiring that can cause intermittent operation
• Helps resolve symptoms such as no power to parts, unresponsive controls, or erratic component behavior
• Provides factory-style connectors for a direct-fit electrical connection

• One wire harness as shown

• Disconnect all power (unplug or shut off breaker) before beginning work
• Take photos of the original harness routing and connector positions to aid reassembly
• Route the harness without sharp bends or pinches and secure with existing clips or ties

This control knob replaces a worn, cracked, or missing appliance control knob to restore a positive, easy-to-grip control for selecting cycles and settings. It provides a simple push-on replacement for a damaged knob. What it does:

• Fits onto the appliance control shaft so you can change settings, temperatures, or cycles easily.
• Restores a secure grip when the original knob is cracked, loose, or spinning on the shaft.
• Helps eliminate slipping, wobble, or difficulty selecting options caused by a broken knob.
• Useful when a knob is lost or cosmetically damaged but the control shaft itself is functional.

• Disconnect power to the appliance before starting any repair.
• Most installations are push-on: align the knob with the shaft splines and press firmly until seated.
• If the knob feels loose or does not engage, verify shaft condition and spline alignment before forcing.