Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Usually ships within 4 - 14 days
Replace a damaged or frayed wire harness in your range. This internal wiring assembly connects electrical components. Order now if your harness is broken.
Replace a cracked, unresponsive, or worn touch pad control panel on your range. Restores button functionality for selecting cooking modes and settings.
Ordered the control panel because the switch membrane is part of it. removed two screws on each side of the panel and the four underneath. pulled the panel down and out to remove. removed the ribbon connection from the erc by sliding the tabs to the right and then removed the four screws that attached the erc to the panel. installed panel by reversing the processs. Read more
Color: chrome. Measures about 23 inches wide by 16 inches deep.
I called Sear's and they told me to call you, You had the oven racks and I replaced the ones that had white plastic all over them. I was able to scrape the plastic off the bottom portion of the oven. I was thrilled you were able to give me the parts I needed, the oven still looks brand new!. Read more
This is the second time I've had to replace the controls on my Jenn-Air stove. This time, 2018, last time 2011. Both times I ordered the part here and the part was exactly right. This time, having done it once before, it took me about 10 minutes. A few possibly useful tips: Control panel or circuit board? When the controls go on this stove, it could be due either to this keypad OR to the circuit board/controller board that sits behind the keypad. So you have to guess which one it is. ... Read more
If your gas burner won't spark or lights intermittently, the igniter switch may have failed. This direct-fit control restores reliable ignition.
I changed out the white burners for black ones which will be easier to clean. This is a simple matter of removing two screws on each burner. The one igniter switch turned out to be okay, but was not fully seated on the valve shaft. As to lighting off issues, the new burners helped, but the most improvement came from removing the burners and cleaning the orifices that supply gas to the burner tubes with a bit of fine wire. Read more
Took out stove top, took off glass top, replaced switch. Easy job Read more
Note: This part does not include the control board. It does include the membrane switch (touchpad) along with the panel.
Color: Black
Fix a burner that won't light or has an unresponsive flame with this gas burner valve. Controls gas flow to one cooktop burner for safe operation.
This is a durable complete top E-burner assembly that is used on ranges and cooktops. This is located in the oven and ensures that food is properly cooked when a user chooses a temperature. If this part is damaged or no longer working, it should be replaced.First, make sure the appliance is unplugged or the circuit breaker is turned off. Open the oven door and remove racks so there is extra room for the replacement process. Next, remove the bottom of the oven. There may be a screw or a nut that needs to be removed. Lift up the bottom and slide it toward the rear before lifting up. Remove the burner baffle and take off the igniter. Remove the screw that holds the top E-burner assembly and lift it out. Replace it with the new part and reassemble the oven.The complete top E-burner assembly is made for cooktops and ranges manufactured by Jenn Air. It is an authentic OEM replacement part that is sold as a single part. It is sourced directly from the manufacturer.
This board with protective shield controls oven functions like temperature regulation, timer operations, and heating element activation. Located behind the oven control panel, replace it when the oven won't heat, temperature is inaccurate, or control functions become erratic.
Jenn-Air Model SVD48600 1. Error Code F7: Secured power and replaced the front display or membrane. Screws are along bottom edge and under stove top control knobs. Removed existing display board from membrane and installed it on the new membrane. Membrane wire ribbon end must be clean. Pull up little tabs on each end of socket on display board and ribbon just slips in/out. Push pins back in to secure. After all wires were reconnected, oven worked for a bit (2 hours or so) and then started... Read more