Jds9860p Parts

This electronic control board with overlay manages your range or wall oven's heating and user interface. Replacing a failing control restores accurate temperature regulation, proper bake/broil operation, and a readable display so the appliance responds as it should.

• Regulates oven heat by switching bake/broil circuits based on temperature sensor feedback
• Powers and displays the clock, timer, and status messages
• Interprets keypad/touchpad inputs to run bake, broil, and clean cycles
• Common failure symptoms: dark or flickering display, unresponsive buttons, oven won't start or maintain set temperature, or error codes

• Disconnect power at the breaker before servicing; verify no voltage present
• Use ESD precautions and handle the board by its edges
• Photograph/label wiring; move connectors one at a time to the new board and seat fully
• After installation, run any model-specific checks or calibrations per the service/tech sheet

Color: black. It measures about 2-1/2 inches in diameter.

Replace a cracked or unresponsive front panel with this black control panel assembly. It restores the appliance's user interface so you can select cooking modes, set temperatures, and operate timers with consistent, reliable button input.

• Provides the front interface for selecting functions and temperatures
• Aligns and supports the keypad area and interfaces with the electronic control on applicable models
• Transmits button presses to the control so cooking functions can start
• Common symptoms: non-responsive or intermittent keys, stuck/shorted keypad errors, or a cracked/damaged panel

• Disconnect power at the breaker or unplug before servicing; allow the unit to cool
• Remove necessary trim and mounting screws; support the panel to avoid straining wires
• Transfer the existing electronic control/clock and any brackets or hardware from the old panel as required
• Seat ribbon/flex connectors fully and handle carefully; do not overtighten fasteners

Note: This part does not include the control board. It does include the membrane switch (touchpad) along with the panel. 

Color: Stainless Panel w/Black Membrane

This product is a Whirlpool oven control "panel" assembly. This is a genuine OEM product and is sourced directly from Whirlpool. This part is compatible with Whirlpool, Magic Chef, Admiral, and Maytag appliances.

Replacement igniter switch that restores spark ignition for gas cooktops and ranges, helping burners light reliably and reducing intermittent or no-ignite symptoms. Designed as a like-for-like control component when your original switch fails. What it does:

• Sends the electrical spark signal to the burner ignition circuit so the burner lights
• Stops clicking or sparking when the switch fails, which can cause burners not to ignite
• Addresses symptoms like intermittent ignition, continuous clicking without flame, or no spark from the burner electrode
• Works as the control point between user knob/ignition module and the spark system

• Turn off power to the appliance and shut off the gas supply before servicing
• Replace with the exact part number and match connector types; do not force-fit a non-matching switch
• After installation, test burners for proper ignition and check for gas leaks before normal use

Color: Stainless.

This control overlay is the thin, labeled membrane that sits over the range/oven control console to protect buttons and display while providing the user interface. It restores legible button labels and responsive touch areas for normal operation. What it does:

• Replaces a worn, faded, or damaged control panel surface so labels and icons are readable.
• Protects the underlying control board and switches from spills, grease, and wear.
• Restores responsive button/soft-key areas when the overlay is causing intermittent or unregistered presses.
• Helps prevent contaminants from reaching the electronic control beneath the console.

• One control overlay as shown

• Disconnect power to the appliance before beginning any work to avoid shock or damage.
• Remove the console or trim to access and replace the overlay; carefully lift straight to avoid bending the underlying PCB or ribbon connectors.
• Keep all fasteners and grounding hardware with the console; do not allow liquids to enter the control area during reinstall.
• If the overlay is bonded to adhesive or requires adhesive transfer, follow OEM instructions or use an appropriate replacement adhesive to ensure a secure fit.

This control knob replaces a worn or missing dial so you can reliably select settings on your appliance. Restore smooth, positive control and a like-new look when an old knob cracks, strips, wobbles, or falls off.

• Attaches to the control shaft so you can choose functions, temperatures, or speeds
• Provides a secure grip for accurate adjustments
• Typical symptoms include a cracked or missing knob, loose or wobbly feel, spinning without engaging, or difficulty turning to Off
• Direct replacement designed to fit the original control stem on compatible models

• Turn the appliance off and allow any hot surfaces to cool
• Pull the old knob straight off the control shaft; avoid prying against the console
• Align the new knob with the shaft and press straight on until fully seated
• Test operation to ensure the pointer aligns with Off and the control engages properly

This locknut is a small threaded retaining nut used to secure rotating and stationary appliance components, helping keep assemblies tight and stable during operation. It prevents parts from loosening and reduces vibration-related issues. What it does:

• Secures shafts, pulleys, or fittings to prevent axial movement
• Keeps assemblies fastened under normal vibration and load
• Helps stop wobble, grinding, or part separation caused by a loose connection
• Works with the matching threaded stud, shaft, or fitting for a proper hold

• Disconnect power and follow appliance safety procedures before servicing
• Use the matching thread size and engage threads fully; hand-start before tightening
• Tighten securely without overtightening; use the correct driver or socket for the nut
• Inspect mating threads and replace if damaged

This band motor is the motor assembly that powers the appliance's moving band or drive link, restoring the mechanism that enables normal rotating or indexing motion. Use it to replace a worn or failed motor for smoother operation. What it does:

• Drives the appliance's band/drive link so the linked components can rotate or index as designed
• Restores motion when the original motor is noisy, weak, or no longer turns
• Helps stop skipping or intermittent movement caused by a failed motor
• Works as the direct replacement motor when the OEM part is specified

• One band motor assembly

• Disconnect power before starting any repair to avoid shock or injury
• Installation may require removing panels and fastening the motor to the band/drive; keep hardware for reassembly
• Verify alignment and secure belt or band tension per the appliance's service instructions

Color: White. Size: 1 qt. can. Acrylic appliance paint.

Color: Black