Jes1456 Parts

This glass turntable tray replaces a damaged or missing tray in your microwave. It provides a stable, heat-resistant surface that rotates to promote even heating and helps prevent dishes from tipping or wobbling during cooking.

• Provides the flat, heat-resistant surface that holds plates and bowls
• Interfaces with the center drive coupler and rides on the roller ring/turntable support to rotate for even heating
• Common symptoms: cracked or broken glass, tray wobbles or slips, won't seat or rotate smoothly, clicking/grinding while turning
• Replace if the center hub area is worn or if the original tray is missing

• Allow the oven to cool; open the door and lift out the old tray. Clean the roller ring/turntable support and cavity floor
• Ensure the roller ring/turntable support is seated correctly
• Align the tray's molded drive slots with the center coupler and set the tray flat on the ring
• Test rotation with a microwave-safe cup of water; do not operate the microwave without the tray and support in place

This turntable motor rotates the microwave's glass tray during cooking. Replacing a worn or seized motor restores smooth, consistent tray movement to help ensure even heating and reliable performance.

• Drives the turntable shaft/coupler to rotate the glass tray during cook cycles
• Helps promote more even cooking and defrosting
• Common symptoms of failure: tray doesn't turn, intermittent or jerky rotation, loud humming/grinding from beneath the cavity

• Disconnect power before servicing; microwaves contain high-voltage components—use caution
• Access is typically from the bottom of the unit; remove the tray and coupler, then the motor's mounting screws, and transfer the wire connections
• Align the motor shaft with the coupler and ensure the tray spins freely before reassembly
• Test with a microwave-safe cup of water to ensure smooth rotation

This gas sensor monitors moisture levels during sensor-cook cycles so the control can adjust time and power for consistent results. Replacing a failed sensor restores reliable sensor-cook performance. What it does:

• Detects steam/vapor inside the cavity and sends feedback to the control board
• Helps the appliance automatically set or adjust cooking time on sensor settings
• Failure symptoms can include sensor-cook not starting, stopping early, or running too long
• May trigger "Sensor" or general error messages related to sensor-cook functions

• Disconnect power before servicing; if working on a microwave, discharge the high-voltage capacitor
• Access is typically behind the control panel or air channel; avoid touching/contaminating the sensing surface
• Transfer any mounting clips/brackets and ensure the wiring connector is fully seated
• After installation, run a simple sensor-cook test to confirm operation

Guide roller assembly that restores smooth, stable movement for a sliding rack or appliance drawer. Replaces worn or broken rollers to reduce sticking, grinding, or misalignment during use. What it does:

• Guides a sliding rack/drawer so it opens and closes evenly without binding
• Helps stop noisy or jerky movement caused by damaged or worn rollers
• Restores proper alignment to prevent racks from slipping or dropping
• Used where a roller rides along a track or guide to support smooth travel

• Disconnect power (and gas, if applicable) and remove any loose items from the appliance before beginning.
• Remove the affected rack/drawer or access panel to reach the guide; keep mounting hardware for reuse unless damaged.
• Align the guide and reinstall hardware securely; test the rack/drawer movement before completing reassembly.
• If mounting clips or brackets are broken, replace those parts as needed for a secure fit.

Replacement thermostat that senses and controls the appliance heating system to restore accurate heating and stable temperature cycles, helping the appliance reach and maintain the set temperature. What it does:

• Senses temperature and signals the heating element or valve to turn on/off to maintain set temperature.
• Commonly linked to symptoms such as failure to reach set temperature, temperature fluctuating or cycling erratically, or continuous heating.
• Works as the temperature-regulation component in the appliance's control pathway to stabilize performance.
• Matches the OEM function for temperature control; use when thermostat diagnostics indicate a failed or inaccurate sensor.

• Disconnect power to the appliance before attempting removal or installation to avoid shock or ignition hazards.
• Handle the sensing element and terminals carefully to avoid damage; ensure secure electrical connections and proper routing of any capillary or sensor lead.
• After installation, test the appliance through a full heat cycle to confirm correct operation.

This is a truss-head self-tapping screw used to secure appliance panels and trim. It replaces a lost or damaged mounting screw to restore proper fit and stop rattles or loose parts. What it does

• Secures trim, panels, brackets or small components where a low-profile, wide-head screw is required
• Self-tapping design cuts threads into sheet metal or similar substrates—no nut required
• Restores tight mounting to reduce vibration, rattling or misaligned panels
• Commonly used in refrigerators, ranges and other household appliances

• One truss-head self-tapping screw

• Disconnect power to the appliance before servicing and work on a cool appliance
• Use the correct screwdriver or bit to avoid stripping the head
• Do not overtighten—turn until snug and the part is secure but not distorted
• Replace with the exact part number to ensure fit and function

This is a binding-head screw used to fasten panels and components on compatible GE appliances. It provides secure, low-profile fastening where a binding head design is required for proper fit and alignment. What it does

• Secures panels, brackets, or small assemblies to prevent movement or rattling.
• Replaces a missing or stripped screw that causes loose parts or squeaks.
• Restores proper alignment for components that rely on the binding-head profile.
• Works where a shallow, rounded head and threaded shaft are specified.

• Use the correct driver size to avoid cam-out or head damage.
• Do not overtighten; snug until secure to avoid stripping threads or damaging parts.
• Disconnect power and follow all appliance-specific safety procedures before accessing panels.

The Diode Cable Assembly is an OEM part for GE microwaves. This part converts AC power to DC power, which is crucial for the microwave's operation.  

Causes of a bad diode cable assembly can include electrical surges, overheating, or general wear and tear.  

Symptoms of a bad diode cable assembly include:

• Microwave not heating food
• Unusual noises during operation
• Burning smell or visible damage to the cable
• Microwave shutting off unexpectedly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

A small replacement push-button spring that restores reliable button return and control feel on affected appliances. Replaces worn or broken button springs so controls snap back and operate more consistently. What it does:

• Provides tension behind a push button so the button returns to its original position after pressing
• Restores proper button feel and prevents buttons from sticking or remaining depressed
• Helps resolve intermittent or unresponsive control-button action caused by a weak or broken spring
• Used in push-button/control-panel assemblies where a compact compression spring is required

• Disconnect power to the appliance before accessing controls to reduce shock risk
• Remove the control panel or button assembly per your model's service instructions; keep small parts secure
• Note spring orientation and seating; use needle-nose pliers if needed to position the spring carefully