Jfc2209vem8 Parts

A replacement door stop that cushions and limits an appliance door's movement to prevent over-travel and reduce slamming. Restores smoother door operation and helps protect the hinge and cabinet from damage. What it does

• Acts as a bumper and travel limit for the appliance door to prevent it from opening too far.
• Reduces loud bangs and impact wear when opening or closing the door.
• Helps the door stay aligned and lessens strain on the hinge assembly.
• Common symptom linkage: door slams, door over-rotates, door binding or noisy hinge movement.

• One door stop.

• Disconnect power (or unplug) and ensure the appliance is stable before servicing.
• Basic hand tools may be required; remove any trim or screws securing the old stop before replacing.
• Align and seat the new stop so the door contacts it evenly; test operation slowly after installation.

Door trim restores the finished edge and appearance of your refrigerator door while helping protect the gasket area and reduce drafts. Replaces cracked, dented, or worn trim to keep the door looking and sealing properly. What it does:

• Provides a finished edge and restores cosmetic appearance to the refrigerator door.
• Helps protect the door seal area from damage and wear.
• Can reduce visible gaps or drafts that lead to frost buildup or temperature loss.
• Covers exposed fasteners and helps maintain a clean, finished look.

• Unplug the refrigerator or switch off power at the breaker before beginning any work.
• Remove any door-mounted items and handle parts as needed to access trim; follow the refrigerator's OEM service manual for step-by-step removal.
• Use care to avoid scratching the finish; gloves are recommended to protect hands and part edges.

This funnel directs water into the ice maker fill cup to ensure proper filling and reduce spills. It helps maintain reliable ice production by guiding water flow to the correct inlet area. What it does:

• Directs incoming water into the ice maker's fill cup so the correct amount reaches the ice mold
• Reduces splashing and overflow during the fill cycle
• Helps prevent water from pooling inside the freezer compartment near the ice maker
• Supports consistent ice production when installed and aligned properly

• Disconnect power to the appliance before servicing to avoid electrical shock
• Remove the ice maker or access panel as needed to reach the old funnel
• Align the replacement funnel with the mounting tabs and secure per OEM orientation; avoid forcing it into place
• Test fill cycle after installation and check for leaks; for detailed steps

This left-side basket cradle replaces a damaged or worn support that holds and stabilizes a removable basket. It restores proper basket alignment and prevents rubbing or sagging so the basket operates smoothly. What it does:

• Supports the left side of the basket to keep it level and secure during use
• Prevents the basket from rubbing against the cabinet or other components
• Restores proper fit and alignment for smooth sliding and operation
• Helps eliminate noise and uneven movement caused by a broken cradle

• Disconnect power to the appliance before starting any repair
• Remove the basket to access the cradle; retain all fasteners for reassembly
• Align the cradle and snap or fasten it into place; verify the basket slides and seats correctly
• If hardware is damaged or missing, replace with OEM-specified fasteners

This door trim is the exterior finish piece that restores a clean, finished look to a refrigerator door and protects the door edge from chips and wear. Ideal for replacing cracked, dented, or missing trim to improve appearance. What it does:

• Covers and protects the outer edge of the refrigerator door for a finished cosmetic appearance
• Replaces damaged or missing trim that can make the door look worn or allow edge damage to spread
• Helps maintain proper fit of adjacent components by restoring the door's exterior profile
• Common symptom: visible cracks, dents, broken mounting tabs, or missing trim panels

• Disconnect power and empty door area before starting; follow appliance safety practices
• Minor disassembly (remove door handle or inner door panel) may be required—use basic hand tools
• Align trim carefully to avoid cracking mounting tabs; do not force into place
• If mounting hardware or adjacent parts are damaged, replace them as needed for a secure fit

This replacement refrigerator door gasket seals the cabinet to maintain consistent temperatures and help keep food fresh. It restores a tight seal to reduce drafts, condensation, and frost buildup around the door. What it does:

• Creates an airtight seal between the door and cabinet to help keep cold air in
• Helps prevent warm spots, excess frost, and water/ice buildup inside the compartment
• Can improve cooling consistency and reduce extra runtime from a leaking seal
• Replaces torn, stretched, or flattened seals that no longer close fully

• Disconnect power to the appliance before starting any work
• Clean the door flange and remove old gasket before fitting the new seal
• Press the gasket evenly into the retainer channel and check that the magnetic edge engages all around
• Allow 24 hours for the gasket to fully seat against the cabinet; reposition if gaps are visible

This mat cushions and protects the appliance base to reduce vibration and help contain small drips or leaks during operation. It's a simple, durable replacement that restores the original fit and helps keep the floor and appliance stable. What it does:

• Dampens movement and vibration to reduce noise and shifting during cycles
• Helps catch minor drips or condensed water beneath the unit
• Restores original cushioning where a worn or missing mat allowed extra movement
• Simple passive part—no electrical or mechanical connections

• One replacement mat as shown

• Place mat under appliance base on a clean, level surface; verify orientation per base shape
• For safety, disconnect power (and water if applicable) before moving the appliance
• Use caution when sliding the appliance to avoid floor damage; get a second person for heavy units
• If ongoing vibration or leaks persist, inspect mounts, leveling legs, and seals for additional repair

This OEM grease is a purpose-made appliance lubricant that reduces friction and protects moving parts for smoother operation and longer component life. Use where specified by the manufacturer for bearings, slides, or motor shafts. What it does:

• Lubricates gears, bearings, rollers and shafts to reduce wear and noise
• Helps prevent binding, seizing, and grinding on moving components
• Protects metal parts from corrosion where grease is specified
• Keeps parts moving smoothly under normal operating temperatures

• Disconnect power before servicing any appliance; follow manufacturer service instructions
• Apply sparingly to clean, dry surfaces; avoid over-greasing which can attract debris
• Wear gloves and wipe excess grease from surrounding areas to prevent staining

This small metal mounting clip secures the thermal fuse in place to maintain proper thermal contact and stable wiring. It helps keep the fuse positioned so the appliance can monitor temperature reliably and operate safely. What it does:

• Secures the thermal fuse to the appliance housing or duct to prevent movement
• Keeps the fuse in correct contact with temperature-sensing surfaces
• Helps prevent intermittent heating or thermal-sensor misreads caused by a loose fuse
• Useful when replacing a damaged or missing fuse retainer during fuse service

• One thermal fuse mounting clip

• Disconnect power to the appliance before servicing to avoid shock or injury
• Remove access panels per your model's service instructions to reach the fuse location
• Install clip in the same orientation as the original; use pliers if needed to seat it firmly
• Inspect the thermal fuse and wiring while installing; replace any damaged components per OEM guidance

This glide ice pan is the molded tray that collects and guides ice from the ice maker into the freezer bin, helping ice dispense smoothly and stay contained. It replaces damaged or warped pans to restore proper ice routing. What it does:

• Collects ice from the ice maker and directs cubes into the storage bin
• Prevents ice from jamming or spilling into the freezer compartment
• Restores correct ice path when the original pan is cracked, warped or broken
• Works with the ice maker assembly to maintain cleaner ice storage

• Disconnect power to the refrigerator before starting any repair
• Remove ice bin and any obstructions, then unclip or unscrew the old pan per your model's service sheet
• Handle with care to avoid cracking the new pan during installation

This upper rack glide replaces the small guide that helps the dishwasher's top rack slide smoothly. Restores proper rack movement and reduces sticking or noisy operation for easier loading and unloading. What it does:

• Guides the upper rack along the track to enable smooth in-and-out motion
• Prevents rack from binding, catching or shifting during cycles
• Reduces scraping or grinding noises caused by worn or broken glides
• Helps maintain proper rack alignment so dishes load securely

• Disconnect power to the appliance before beginning any work
• Rack removal is often required to access and replace the glide
• Reuse existing fasteners unless damaged; replace any broken clips with OEM parts

This replacement shim is a thin positioning spacer used to align or level internal components for correct fit and operation. It helps restore proper clearances and reduce rubbing, noise, or misalignment-related issues. What it does:

• Provides precise spacing between parts to ensure correct alignment
• Helps eliminate rubbing or contact that can cause noise or wear
• Restores proper component clearance after service or reassembly
• Used when a missing, worn, or incorrect spacer leads to misalignment symptoms

• One replacement shim

• Inspect mating surfaces and clean debris before installing the shim
• Verify correct placement and orientation against the original shim or diagram
• Tighten fasteners to the manufacturer's specifications; do not overtighten
• Disconnect power and follow all safety precautions before servicing

Sealer for refrigerant line insulation.

A small hex retaining nut used to secure fittings and components in place on compatible Whirlpool appliances. Durable metal construction keeps assemblies tight and prevents loosening from vibration or normal use. What it does:

• Secures threaded studs, bolts, or fittings to maintain proper assembly alignment
• Helps prevent parts from loosening during normal operation or vibration
• Commonly used on panels, brackets, or internal component mounts
• Serves as a simple, serviceable fastener for repair or reassembly tasks

• One metal hex nut

• Disconnect power and water (when applicable) before servicing the appliance
• Use the correct size wrench or socket to tighten; avoid over-tightening which can strip threads
• Keep track of small parts and fasteners during disassembly to ensure correct reassembly
• If the original nut is corroded or damaged, replace it with this new nut of the same thread size

This condenser grommet cushions and secures the refrigerator condenser assembly, reducing vibration and preventing metal-to-metal contact. It helps keep the condenser stable for quieter operation and longer component life. What it does:

• Isolates condenser from the cabinet to reduce rattling and vibration noise
• Prevents condenser edges from rubbing or wearing against the chassis
• Helps maintain proper condenser alignment for efficient airflow
• Commonly replaced when cracked, torn, or missing and causing noise or movement

• Disconnect power before servicing the appliance.
• Support the condenser assembly before removing or installing the grommet to avoid stress on tubing.
• Push the grommet into position; replace any grommets that are brittle or deformed.

This crisper pan replaces the lower fresh-food drawer pan to support produce storage and collect spills so the drawer operates smoothly. It restores a stable base for the crisper drawer and helps contain leaks for easier cleanup. What it does:

• Provides the support surface for the refrigerator crisper/fresh-food drawer
• Helps contain spills and prevents liquids from dripping into the cabinet
• Restores proper drawer alignment and smooth sliding action
• Fits into the bottom of the crisper/drawer assembly to hold produce and bins

• Remove refrigerated food and turn the refrigerator off or disconnect power before servicing
• Slide the crisper drawer out, lift gently as needed, and replace the pan in the drawer housing
• Inspect surrounding rails and gaskets for wear; replace damaged components as needed
• Handle carefully to avoid cracking plastic; do not use excessive force during installation